Samsung CLP 550 User Manual
Have a look at the manual Samsung CLP 550 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SETUP GUIDE9 English 6Hold the handle on the imaging unit with the green roller facing you. Align the imaging unit with the slots in your printer so that the colors on both sides of the imaging unit slide into the corresponding colors of the slots. CAUTION: Insert the imaging unit carefully so as not to scratch and damage the surface of the green roller. 7Slide the imaging unit down into the printer until it cannot be pushed in any further and fold the handle down. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left cover should the setup need to be halted for any reason. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: Keep the transfer belt level, do not turn the transfer belt over otherwise looses toner may be spilled. 13Slide the transfer belt down into the printer. Press it firmly to make sure that it latches into place. %ownloadedd/romd“anuals@rinterbcomd“anuals CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridges packages. You could damage the surface of the toner cartridges. 17Holding both sides of the cartridges, gently roll them from side to side to distribute the toner. 18Place the toner cartridges on a flat surface as shown and remove the paper covering on the toner cartridge by removing the tape. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of about 7,000 pages for black and 5,000 pages for color. %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals TEUP: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the USB printer cable into the connector on the back of the printer. 3Connect the other end of the cable to the USB port on your computer. See the User’s Guide of your computer, if you need help. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/XP, or Macintosh with OS 8.6~9.2/10.1~10.3. To the USB port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals To the network LAN connection %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: For Windows NT 4.0/2000/XP, the system administrator should install the software. All applications should be closed on your PC before beginning installation. 1Place the CD-ROM in the CD-ROM drive. Installation will start automatically. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\Setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK. NOTE: If the New Hardware Found window appears during the installation procedure, click in the upper right corner of the box, or click Cancel. ItemRequirements Operating systemWindows 95/98/Me/NT 4.0/2000/XP RAM95/98/Me 32 MB NT 4.0/2000 64 MB XP 128 MB Free disk space95/98/Me/NT 4.0/ 2000/XP300 MB Internet Explorer 5.0 or higher Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals NOTE: If your printer is not connected to the computer, the Connect Samsung CLP-550 Series window opens. After connecting the printer, click Next. 4Select the components you want to reinstall and click Next. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: If your computer doesn’t have Adobe Acrobat, selecting the View User’s Guide option automatically installs Adobe Acrobat for you. After installing is complete, repeats step 1 and 2. In Macintosh 1Place the CD-ROM in the CD-ROM drive. 2Double-click SAMSUNG_CLP on your Macintosh desktop. 3Double-click User’s Guide folder. 4Double-click User’s Guide.pdf(language). The Adobe Acrobat programme opens and you can view the User’s Guide. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE12 14Firmly push the lock levers on each side towards the top cover, as shown below, to lock the transfer belt into place. CAUTION: If you open the left cover for a few minutes, the imaging unit can be exposed to light. This causes damage to the imaging unit. 15After making sure that the left cover is open, close the top cover. Make sure that it is securely latched. CAUTION: Do not try to close the left cover with the top cover open. This may cause damage to the printer. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE9 English 6Hold the handle on the imaging unit with the green roller facing you. Align the imaging unit with the slots in your printer so that the colors on both sides of the imaging unit slide into the corresponding colors of the slots. CAUTION: Insert the imaging unit carefully so as not to scratch and damage the surface of the green roller. 7Slide the imaging unit down into the printer until it cannot be pushed in any further and fold the handle down. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left cover should the setup need to be halted for any reason. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: Keep the transfer belt level, do not turn the transfer belt over otherwise looses toner may be spilled. 13Slide the transfer belt down into the printer. Press it firmly to make sure that it latches into place. %ownloadedd/romd“anuals@rinterbcomd“anuals CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridges packages. You could damage the surface of the toner cartridges. 17Holding both sides of the cartridges, gently roll them from side to side to distribute the toner. 18Place the toner cartridges on a flat surface as shown and remove the paper covering on the toner cartridge by removing the tape. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of about 7,000 pages for black and 5,000 pages for color. %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals TEUP: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the USB printer cable into the connector on the back of the printer. 3Connect the other end of the cable to the USB port on your computer. See the User’s Guide of your computer, if you need help. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/XP, or Macintosh with OS 8.6~9.2/10.1~10.3. To the USB port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals To the network LAN connection %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: For Windows NT 4.0/2000/XP, the system administrator should install the software. All applications should be closed on your PC before beginning installation. 1Place the CD-ROM in the CD-ROM drive. Installation will start automatically. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\Setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK. NOTE: If the New Hardware Found window appears during the installation procedure, click in the upper right corner of the box, or click Cancel. ItemRequirements Operating systemWindows 95/98/Me/NT 4.0/2000/XP RAM95/98/Me 32 MB NT 4.0/2000 64 MB XP 128 MB Free disk space95/98/Me/NT 4.0/ 2000/XP300 MB Internet Explorer 5.0 or higher Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals NOTE: If your printer is not connected to the computer, the Connect Samsung CLP-550 Series window opens. After connecting the printer, click Next. 4Select the components you want to reinstall and click Next. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: If your computer doesn’t have Adobe Acrobat, selecting the View User’s Guide option automatically installs Adobe Acrobat for you. After installing is complete, repeats step 1 and 2. In Macintosh 1Place the CD-ROM in the CD-ROM drive. 2Double-click SAMSUNG_CLP on your Macintosh desktop. 3Double-click User’s Guide folder. 4Double-click User’s Guide.pdf(language). The Adobe Acrobat programme opens and you can view the User’s Guide. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE14 19On the right hand side of the toner cartridge slot is a label that identifies which color cartridge to fit into each slot. 20Holding each toner cartridge, insert them into their corresponding positions shown in order of Cyan, Magenta, Yellow and then Black. Using both hands, grip the cartridge to insert into the slot. Then hold the handle to slide the cartridge in. When the toner cartridges are correctly installed the yellow and black cartridges are not fully inserted. These will be pushed into place when you close the left cover. C M Y K Black Yellow Magenta Cyan M Y K C Grip here. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE9 English 6Hold the handle on the imaging unit with the green roller facing you. Align the imaging unit with the slots in your printer so that the colors on both sides of the imaging unit slide into the corresponding colors of the slots. CAUTION: Insert the imaging unit carefully so as not to scratch and damage the surface of the green roller. 7Slide the imaging unit down into the printer until it cannot be pushed in any further and fold the handle down. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left cover should the setup need to be halted for any reason. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: Keep the transfer belt level, do not turn the transfer belt over otherwise looses toner may be spilled. 13Slide the transfer belt down into the printer. Press it firmly to make sure that it latches into place. %ownloadedd/romd“anuals@rinterbcomd“anuals CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridges packages. You could damage the surface of the toner cartridges. 17Holding both sides of the cartridges, gently roll them from side to side to distribute the toner. 18Place the toner cartridges on a flat surface as shown and remove the paper covering on the toner cartridge by removing the tape. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of about 7,000 pages for black and 5,000 pages for color. %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals TEUP: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the USB printer cable into the connector on the back of the printer. 3Connect the other end of the cable to the USB port on your computer. See the User’s Guide of your computer, if you need help. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/XP, or Macintosh with OS 8.6~9.2/10.1~10.3. To the USB port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals To the network LAN connection %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: For Windows NT 4.0/2000/XP, the system administrator should install the software. All applications should be closed on your PC before beginning installation. 1Place the CD-ROM in the CD-ROM drive. Installation will start automatically. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\Setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK. NOTE: If the New Hardware Found window appears during the installation procedure, click in the upper right corner of the box, or click Cancel. ItemRequirements Operating systemWindows 95/98/Me/NT 4.0/2000/XP RAM95/98/Me 32 MB NT 4.0/2000 64 MB XP 128 MB Free disk space95/98/Me/NT 4.0/ 2000/XP300 MB Internet Explorer 5.0 or higher Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals NOTE: If your printer is not connected to the computer, the Connect Samsung CLP-550 Series window opens. After connecting the printer, click Next. 4Select the components you want to reinstall and click Next. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: If your computer doesn’t have Adobe Acrobat, selecting the View User’s Guide option automatically installs Adobe Acrobat for you. After installing is complete, repeats step 1 and 2. In Macintosh 1Place the CD-ROM in the CD-ROM drive. 2Double-click SAMSUNG_CLP on your Macintosh desktop. 3Double-click User’s Guide folder. 4Double-click User’s Guide.pdf(language). The Adobe Acrobat programme opens and you can view the User’s Guide. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE16 Step 4. Loading Paper The tray (Tray 1) can hold a maximum of 250 sheets of plain paper. You can use A4 and letter-sized paper. To load paper: 1Pull the tray out of the printer. 2Push down on the metal plate until it locks into position. 3Flex the paper sheets back and forth to separate the pages and then fan them while holding one edge. Tap the edges of the stack on a flat surface to even it up. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE9 English 6Hold the handle on the imaging unit with the green roller facing you. Align the imaging unit with the slots in your printer so that the colors on both sides of the imaging unit slide into the corresponding colors of the slots. CAUTION: Insert the imaging unit carefully so as not to scratch and damage the surface of the green roller. 7Slide the imaging unit down into the printer until it cannot be pushed in any further and fold the handle down. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left cover should the setup need to be halted for any reason. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: Keep the transfer belt level, do not turn the transfer belt over otherwise looses toner may be spilled. 13Slide the transfer belt down into the printer. Press it firmly to make sure that it latches into place. %ownloadedd/romd“anuals@rinterbcomd“anuals CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridges packages. You could damage the surface of the toner cartridges. 17Holding both sides of the cartridges, gently roll them from side to side to distribute the toner. 18Place the toner cartridges on a flat surface as shown and remove the paper covering on the toner cartridge by removing the tape. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of about 7,000 pages for black and 5,000 pages for color. %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals TEUP: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the USB printer cable into the connector on the back of the printer. 3Connect the other end of the cable to the USB port on your computer. See the User’s Guide of your computer, if you need help. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/XP, or Macintosh with OS 8.6~9.2/10.1~10.3. To the USB port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals To the network LAN connection %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: For Windows NT 4.0/2000/XP, the system administrator should install the software. All applications should be closed on your PC before beginning installation. 1Place the CD-ROM in the CD-ROM drive. Installation will start automatically. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\Setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK. NOTE: If the New Hardware Found window appears during the installation procedure, click in the upper right corner of the box, or click Cancel. ItemRequirements Operating systemWindows 95/98/Me/NT 4.0/2000/XP RAM95/98/Me 32 MB NT 4.0/2000 64 MB XP 128 MB Free disk space95/98/Me/NT 4.0/ 2000/XP300 MB Internet Explorer 5.0 or higher Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals NOTE: If your printer is not connected to the computer, the Connect Samsung CLP-550 Series window opens. After connecting the printer, click Next. 4Select the components you want to reinstall and click Next. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: If your computer doesn’t have Adobe Acrobat, selecting the View User’s Guide option automatically installs Adobe Acrobat for you. After installing is complete, repeats step 1 and 2. In Macintosh 1Place the CD-ROM in the CD-ROM drive. 2Double-click SAMSUNG_CLP on your Macintosh desktop. 3Double-click User’s Guide folder. 4Double-click User’s Guide.pdf(language). The Adobe Acrobat programme opens and you can view the User’s Guide. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE18 6Pinch the paper guide as shown and move it towards the paper until it lightly touches the side of the stack. Do not press the guide too tightly against the edge of the paper as the guide may bend the paper. NOTE: If you want to change the paper size in the tray, refer to the User’s Guide of your printer supplied in the CD-ROM. 7Slide the tray back into the printer. NOTES: • Do not push the width guide far enough to cause the material to warp. • If you do not adjust the width guide, it may cause paper jam. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE9 English 6Hold the handle on the imaging unit with the green roller facing you. Align the imaging unit with the slots in your printer so that the colors on both sides of the imaging unit slide into the corresponding colors of the slots. CAUTION: Insert the imaging unit carefully so as not to scratch and damage the surface of the green roller. 7Slide the imaging unit down into the printer until it cannot be pushed in any further and fold the handle down. CAUTION: To prevent damage, do not expose the imaging unit to light for more than a few minutes. Close the top and left cover should the setup need to be halted for any reason. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: Keep the transfer belt level, do not turn the transfer belt over otherwise looses toner may be spilled. 13Slide the transfer belt down into the printer. Press it firmly to make sure that it latches into place. %ownloadedd/romd“anuals@rinterbcomd“anuals CAUTION: Do not use sharp objects, such as a knife or scissors, to open the toner cartridges packages. You could damage the surface of the toner cartridges. 17Holding both sides of the cartridges, gently roll them from side to side to distribute the toner. 18Place the toner cartridges on a flat surface as shown and remove the paper covering on the toner cartridge by removing the tape. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of about 7,000 pages for black and 5,000 pages for color. %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals TEUP: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the USB printer cable into the connector on the back of the printer. 3Connect the other end of the cable to the USB port on your computer. See the User’s Guide of your computer, if you need help. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/XP, or Macintosh with OS 8.6~9.2/10.1~10.3. To the USB port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals To the network LAN connection %ownloadedd/romd“anuals@rinterbcomd“anuals%ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: For Windows NT 4.0/2000/XP, the system administrator should install the software. All applications should be closed on your PC before beginning installation. 1Place the CD-ROM in the CD-ROM drive. Installation will start automatically. If the CD-ROM drive does not automatically run: Select Run from the Start menu, and type x:\Setup.exe in the Open box (where x is the drive letter for the CD-ROM drive), then click OK. NOTE: If the New Hardware Found window appears during the installation procedure, click in the upper right corner of the box, or click Cancel. ItemRequirements Operating systemWindows 95/98/Me/NT 4.0/2000/XP RAM95/98/Me 32 MB NT 4.0/2000 64 MB XP 128 MB Free disk space95/98/Me/NT 4.0/ 2000/XP300 MB Internet Explorer 5.0 or higher Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals NOTE: If your printer is not connected to the computer, the Connect Samsung CLP-550 Series window opens. After connecting the printer, click Next. 4Select the components you want to reinstall and click Next. %ownloadedd/romd“anuals@rinterbcomd“anuals NOTE: If your computer doesn’t have Adobe Acrobat, selecting the View User’s Guide option automatically installs Adobe Acrobat for you. After installing is complete, repeats step 1 and 2. In Macintosh 1Place the CD-ROM in the CD-ROM drive. 2Double-click SAMSUNG_CLP on your Macintosh desktop. 3Double-click User’s Guide folder. 4Double-click User’s Guide.pdf(language). The Adobe Acrobat programme opens and you can view the User’s Guide. %ownloadedd/romd“anuals@rinterbcomd“anuals
SETUP GUIDE20 Using a Parallel Cable NOTES: • The parallel port may not be available depending on your country. • To connect the printer to the parallel port of the computer requires a certified parallel cable. You need to buy a IEEE1284 compliant cable that is within 3m in length. 1Make sure that both the printer and the computer are turned off. 2Plug the parallel printer cable into the connector on the back of the printer. Push the metal clips down to fit inside the notches on the cable plug. 3Connect the other end of the cable to the parallel interface port on your computer, and tighten the screws. See the User’s Guide of your computer, if you need help. To the parallel port on your computer %ownloadedd/romd“anuals@rinterbcomd“anuals