Samsung CLP 550 User Manual

COLOR LASER PRINTER
Setup Guide
Downloaded From ManualsPrinter.com Manuals 

 
S
 
ETUP
 
 G
 
UIDE
 
2 
C 
ONTENTS
 
Step 1. 
 Unpacking  .............................................  3 
Step 2. 
 Understanding Your Printer ...................  5 
Step 3. 
 Installing the Imaging Unit, Transfer 
Belt and Toner Cartridges  .....................  7 
Step 4. 
  
Loading Paper  .....................................  16 
Step 5. 
 Connecting a Printer Cable  ..................  19  
For Local Printing  ......................................19
For Networking Printing...

 
S
 
ETUP
 
 G
 
UIDE
 
3 
English
 
Step 1. 
  
Unpacking 
1
 
Remove the printer and all of the accessories from the 
packing carton. Make sure that the printer has been packed 
with the following items:
 
N
 
OTES
 
:
• If any items are missing or damaged, notify your dealer 
immediately. 
• Components may differ from one country to another.
• The CD-ROM contains the printer driver, the User’s Guide, and 
the Adobe Acrobat Reader program.
 
• The power cord may be different depending on your...

 
S
 
ETUP
 
 G
 
UIDE
 
4 
2
 
Carefully remove all of the packing tapes from the printer. 
 
3
 
Pull the paper tray out of the printer and remove the 
packing tapes from the tray.
 
4
 
Select a location for the printer:
•Leave enough room to open the printer trays, covers, and 
allow for proper ventilation.
•Provide the proper environment:
– A firm, level surface
– Away from direct airflow of air conditioners, heaters, or
   ventilators
– Free of temperature, sunlight, or humidity extremes or...

 
S
 
ETUP
 
 G
 
UIDE
 
5 
English
 
Step 2. 
 Understanding Your Printer 
These are the main components of your printer:
Output Support
Control Panel
(refer to Chapter 
5 in the User’s 
Guide which is 
on the CD-
ROM.)
Paper Output Tray Top Cover
(Open to install the imaging unit,
and transfer belt.)
Front Cover
(Open to replace 
the waste toner 
container.)
Left Cover
(To install the toner cartridges
press the top cover release
button and open fully.)
Tray 1
(250-sheet paper feeder) Top Cover
Release...

 
S
 
ETUP
 
 G
 
UIDE
 
6
Optional Tray 2 Jam Cover
(Open to remove jams in the optional tray 2.)Muti-purpose Tray
(Open to load special print materials.) Right Cover
(Open to remove paper jams.)
Power Switch
USB Port
Power Receptacle
Control Board
Cover
(Open to install optional
accessories.)Wireless Network
Antenna
*
Network Port**
Parallel Port
* This wireless network antenna is not supplied with the printer. It is an option that must be purchased 
and installed separately.
** The network port is...

 
S
 
ETUP
 
 G
 
UIDE
 
7 
English
 
Step 3. 
 Installing the Imaging Unit, Transfer 
Belt and Toner Cartridges 
1
 
Using the handle, completely open the left cover until it is at 
right angles to the main frame. 
 
C
 
AUTION
 
:
 
 
 
If the left cover is not completely open, the top cover 
 
release button does not be pressed.
 
2
 
Press the top cover release button to unlatch the top cover 
and open it all the way.
Top cover release
button
%ownloadedd/romd“anuals@rinterbcomd“anuals 

 
S
 
ETUP
 
 G
 
UIDE
 
8 
3
 
Take the imaging unit out of the package using the handle.
 
4
 
Remove the paper covering on the imaging unit by 
removing the tape under the handle of the imaging unit.
 
C
 
AUTIONS
 
:
• Do not use sharp objects, such as a knife or scissors, to open the 
imaging unit package and tape on the protective paper liner. You 
could damage the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for 
more than a few minutes. Cover it with...

SETUP GUIDE9
English
6Hold the handle on the imaging unit with the green roller 
facing you. Align the imaging unit with the slots in your 
printer so that the colors on both sides of the imaging unit 
slide into the corresponding colors of the slots.
CAUTION: Insert the imaging unit carefully so as not to scratch 
and damage the surface of the green roller.
7Slide the imaging unit down into the printer until it cannot 
be pushed in any further and fold the handle down. 
CAUTION: To prevent damage, do...

SETUP GUIDE10
8Take the transfer belt out of the package.
9Remove the paper covering on the transfer belt by 
removing the tape.
CAUTION: Don’t use sharp objects, such as a knife or scissors, to 
open the transfer belt package. You could damage the surface of 
the transfer belt.
10Pinch the transfer belt tention levers on both sides of the 
transfer belt. Then, pull them out, as shown below.
11Locate the transfer belt slots inside the printer, one on each 
side.
%ownloadedd/romd“anuals@rinterbcomd“anuals