Samsung C460 User Guide

							Media and tray
512. Menu Overview and Basic Setup
3 Adjust the document feeder width guides to the paper size.
 
Dust on the document feeder glass may cause black lines on the printout. 
Always keep the glass clean (see "Cleaning the machine" on page 89).
  
						

							522. Menu Overview and Basic Setup
Basic printing 
 
For special printing features, refer to the Advanced Guide (see "Using 
advanced print features" on page 230).
 
9 
Printing
 
If you are a Mac or Linux operating systems user, refer to the Advanced 
Guide (see "Mac printing" on page 237 or "Linux printing" on page 239).
 
The following Printing Preferences window is for Notepad in Windows 7.
1Open the document you want to print.
2 Select Print from the File  menu.
3 Select your machine from the Select Printer  list.
4 The basic print settings including the number of copies and print range 
are selected within the  Print window. 
 
To take advantage of the adva nced printing features, click Properties or 
Preferences  from the Print  window (see "Opening printing preferences" on 
page 54).
 
5 To start the print job, click OK  or Print  in the  Print window. 
						

							Basic printing
532. Menu Overview and Basic Setup
10 
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as 
follows:
• You can access this window by s imply double-clicking the machine icon 
( ) in the Windows task bar. 
• You can also cancel the  current job by pressing  ( Stop/Clear) on the 
control panel. 
						

							Basic printing
542. Menu Overview and Basic Setup
11 
Opening printing preferences
 
• The Printing Preferences  window that appears in this user’s guide may 
differ depending on the machine in use. 
• When you select an option in  Printing Preferences, you may see a 
warning mark   or  . An   mark means you can select that certain 
option but it is not recommended, and an   mark means you cannot 
select that option due to the  machine’s setting or environment.
 
1Open the document you want to print.
2 Select Print from the file menu. The  Print window appears. 
3 Select your machine from the  Select Printer. 
4 Click Properties  or Preferences . 
 
• You can apply  Eco features to save paper and toner before printing (see 
"Easy Eco Driver" on page 263).
• You can check the machine’s current status pressing the  Printer Status 
button (see  "Using Samsung Printer Status" on page 271).
  
						

							Basic printing
552. Menu Overview and Basic Setup
Using a favorite setting
The Favorites  option, which is visible on each  preferences tab except for the 
Samsung tab, allows you to save the  current preferences for future use.
To save a  Favorites  item, follow these steps:
1Change the settings as needed on each tab. 
2 Enter a name for the item in the  Favorites input box.
3 Click Save. 
4 Enter name and description, and then select the desired icon.
5 Click  OK. When you save  Favorites, all current driver  settings are saved.
 
To use a saved setting, select it in the  Favorites tab. The machine is now set 
to print according to the settings you have selected.
To delete saved settings, select it in the  Favorites tab and click  Delete. 
 
12 
Using help
Click the option you want to know on the  Printing Preferences window and 
press  F1 on your keyboard. 
						

							Basic printing
562. Menu Overview and Basic Setup
13 
Eco printing
The Eco function cuts toner consu mption and paper usage. The Eco  function 
allows you to save print resources and lead you to  eco-friendly printing.
If you press the  Eco button from the control panel, eco mode is enabled. The 
default setting of Eco mode is  Multiple Pages per Side (2) and Toner Save. 
Some features may not be avai lable depending on the model.
 
• You can set the machine’s settings by using the  Device Settings in 
Samsung Easy Printer Manager  program.
- For Windows and Mac users, you set from  Samsung Easy Printer 
Manager  > (Switch to advanced mode)  > Device Settings , 
see "Device Settings" on page 269.
• It may be necessary to press  OK to navigate to lower-level menus for 
some models.
 
Setting Eco mode on the control panel
1Select ( Menu) > System Setup  > Machine Setup  > Eco Settings  on 
the control panel.
2 Select the option you want and press OK .
• Default Mode:  Select this to turn on  or off the eco mode.
- Off: Set the eco mode off.
- On: Set the eco mode on.
 
If you set the eco mode on with  a password from the SyncThru™ Web 
Service ( Settings  tab > Machine Settings  > System  > Eco Settings ) or 
Samsung Easy Printer Manager  (Device Settings  > Eco ), the  On force  
message appears. You have to enter  the password to change the eco mode 
status.
 
• Select Temp.:  Follow the settings from Syncthru™ Web Service or 
Samsung Easy Printer Manager . Before you select this item, you 
must set the eco function in  SyncThru™ Web Service (Settings tab > 
Machine Settings  > System  > Eco Settings ) or Samsung Easy 
Printer Manager  (Device Settings  > Eco ). 
- Default Eco : The machine is set to  Default Eco mode.
- Custom Eco : Change any necessary values.
3 Press OK to save the selection. 
						

							Basic printing
572. Menu Overview and Basic Setup
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see th e eco image ( ), that 
means the eco mode is currently enabled.
Eco options
• Printer Default:  Follows the settings from the  machine's control panel.
• None:  Disables Eco mode.
• Eco Printing:  Enables eco mode. Activate the v arious Eco items you want to 
use.
• Password:  If the administrator fixed to  enable the Eco mode, you have to 
enter the password to  change the status.
Result simulator
Result Simulator shows the results of reduced emi ssion of carbon dioxide, used 
electricity, and the amount  of saved paper in accordance with the settings you 
selected.
• The results are calculated on the basis that the total number of printed  paper is one hundred without a blank page when the Eco mode is disabled.
• Refers to the calculation coefficien t about CO2, energy, and paper from IEA, 
the index of Ministry of Internal Affai rs and Communication of Japan and 
www.remanufacturing.org.uk. Each  model has a different index. 
• The power consumption in printing mo de refers to the average printing 
power consumption of this machine.  • The actual amount displayed is only an
 estimate as the actual amount may 
differ depending on the operating s ystem used, computing performance, 
application software, connection me thod, media type [thickness], media 
size, job complexity, etc. 
						

							582. Menu Overview and Basic Setup
Basic copying
 
For special printing features, refer to the Advanced Guide (see "Copy" on 
page 206).
 
14 
Basic copy
1C46xW: Make sure that the Scan to button’s LED is off. 
C46xFW: Select  (copy) on  the control panel.
2 Place a single document face down on  the document glass, or load the 
documents face up into th e document feeder (see "Loading originals" on 
page 48).
3 If you want to customize th e copy settings including Reduce/Enlarge, 
Darkness , Contrast , Original Type , and more by using the control 
panel buttons (see "Changing the setti ngs for each copy" on page 58). 
4 Enter the number of copies using the arrow or number keypad, if 
necessary.
5 Press  (Start).
 
If you need to cancel the copying job during the operation, press  ( Stop/
Clear ) and the copying will stop.
 
15 
Changing the settings for each copy
Your machine provides default settings fo r copying so that you can quickly and 
easily make a copy. 
 
• If you press the (Stop/Clear ) button twice while setting the copy 
options, all of the options you have  set for the current copy job will be 
canceled and returned to their defaul t status. Or, they will automatically 
return to their default status afte r the machine completes the copy in 
progress.
• Accessing menus may differ from model to model (see "Accessing the  menu" on page 31).
• It may be necessary to press  OK to navigate to lower-level menus for 
some models.
  
						

							Basic copying
592. Menu Overview and Basic Setup
Darkness
If you have an original containing faint marking and dark images, you can adjust 
the brightness to make a copy  that is easier to read.
1C46xW: Make sure that the Scan to button’s LED is off.
C46xFW: Select  (copy)  on the control panel.
2 Select (Menu) > Copy Feature  > Darkness  on the control panel.
3 Select the option yo u want and press OK.
For example, the  Light+5 being the lightest, and the  Dark+5 being the 
darkest.
4 Press ( Stop/Clear ) to return to ready mode.
Darkness
The Darkness menu lets you increase or de crease the difference between the 
bright and dark areas of an image.
1C46xW: Make  sure that the Scan to button’s LED is off.
C46xFW: Select  (copy)  on the control panel.
2 Select (Menu) > Copy Feature  > Darkness  on the control panel.
3 Select the option you want and press OK .
4 Press (Stop/Clear ) to return to ready mode.
Original 
The original setting is used  to improve the copy quality by selecting the 
document for the current copy job.
1C46xW: Make sure that the  Scan to button’s LED is off.
C46xFW: Select  (copy) on  the control panel.
2 Select (Menu) > Copy Feature  > Original Type on the control panel.
3 Select the option you want and press OK .
• Text : Use for originals co ntaining mostly text.
• Text/Photo : Use for originals with mix ed text and photographs.
 
If texts in the printout is blurry, select  Text to get the clear texts.
 
•Photo : Use when the origin als are photographs.
• Magazine : Use when the originals are magazine.
4 Press (Stop/Clear ) to return to ready mode. 
						

							Basic copying
602. Menu Overview and Basic Setup
Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400% from the 
document feeder or scanner glass.
 
• This feature may not be available depending on model or optional goods 
(see "Variety feature" on page 10).
• If the machine set to Eco mode, reduce and enlarge features are not  available.
 
To select from the predefined copy sizes
1C46xW: Make  sure that the Scan to button’s LED is off.
C46xFW: Select  (copy)  on the control panel.
2 Select (Menu) > Copy Feature  > Reduce/Enlarge  on the control 
panel.
3 Select the option yo u want and press OK.
4 Press ( Stop/Clear ) to return to ready mode.
To scale the copy by dire ctly entering the scale rate
1C46xW: Make sure that the  Scan to button’s LED is off.
C46xFW: Select  (copy) on  the control panel.
2 Select (Menu) > Copy Feature  > Reduce/Enlarge  > Custom  on the 
control panel.
3 Enter the copy size you want  using the numeric keypad.
4 Press OK to save the selection.
5 Press ( Stop/Clear ) to return to ready mode.
 
When you make a reduced copy, black  lines may appear at the bottom of 
your copy.