Samsung C460 User Guide

							1. Software Installation
This chapter provides instructions for installing essential and helpful softwar e for use in an environment where the 
machine is connected via a cable. A loca lly connected machine is a machine directly attached to your computer using 
the cable. If your machine is attached to a network, skip the following steps be low and go on to installing a network 
connected machine’s driver (see "Installing  driver over the network" on page 151).
• Installation for Mac 142
• Reinstallation for Mac 143
• Installation for Linux 144
• Reinstallation for Linux 145
 
• If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see 
"Installing the driver locally" on page 28).
• Only use a USB cable no longer then 3 meter (118 inches).
  
						

							1421.  Software Installation
Installation for Mac
1Make sure that the machine is connected to your computer and 
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac desktop.
• For Mac OS X 10.8, double-click the CD-ROM that appears on  Finder.
4 Double-click the MAC_Installer folder > Installer OS X  icon.
5 Click Continue.
6 Read the license ag reement and click Continue.
7 Click Agree  to agree to the license agreement.
8 Click Install. All components necessary for machine  operations will be 
installed.
If you click  Customize , you can choose individual  components to install.
9 Enter the password and click OK .
10 Select USB Connected Printer on the  Printer Connection Type and 
click  Continue .
11 Click Add Printer  button to select your  printer and add it to your printer 
list.
If your machine supports fax, click  Add Fax button to select your fax and 
add it to your fax list
12 After the installation  is finished, click Close.
 
To install the fax driver: 
a  Open the  Applications  folder > Samsung  > Fax Queue Creator .
b  Your machine appears on the Printer List
c  Select machine to use and click  Create button
  
						

							1431.  Software Installation
Reinstallation for Mac
If the printer driver does not work properly, uninstall the driver and reinstall it.
1Open the Applications folder > Samsung  > Printer Software 
Uninstaller .
2 To uninstall printer  software, click Continue.
3 Check the program you wa nt to delete and click Uninstall.
4 Enter the password and click OK .
5 After the uninstallation is finished, click Close.
 
If a machine has already been added, delete it from the  Print Setup Utility 
or  Print & Fax .
  
						

							1441.  Software Installation
Installation for Linux
You need to download Linux software packages from the Samsung website to 
install the printer software (http:// www.samsung.com > find your product > 
Support or Downloads).
1 
Installing the Unified Linux Driver
1Make sure that the machine is  connected to your computer and 
powered on.
2 When the  Administrator Login window appears, type “root” in the 
Login  field and enter  the system password.
 
You must log in as a super user (root) to install the machine software. If you 
are not a super user, ask your system administrator.
 
3 From the Samsung website, download  the Unified Linux Driver package 
to your computer.
4 Right-click the Unified Linux Driver  package and extract the package. 
5 Double click cdroot > autorun .
6 When the welcome scre en appears, click Next.
7 When the installation is complete, click  Finish. The installation program added the Unif
ied Driver Configurator desktop icon 
and the Unified Driver grou p to the system menu for yo ur convenience. If you 
have any difficulties, consul t the on-screen help that is available through your 
system menu or from the driver pack age Windows applications, such as Unified 
Driver Configurator  or Image Manager . 
						

							1451.  Software Installation
Reinstallation for Linux
If the printer driver does not work properly, uninstall the driver and reinstall it. 
1Make sure that the machine is  connected to your computer and 
powered on.
2 When the  Administrator Login window appears, type “root” in the 
Login  field and enter  the system password.
You must log in as a super user (root) to  uninstall the printer driver. If you 
are not a super user, ask  your system administrator.
3 Open the Terminal program. When the  Terminal screen appears, type in 
the following.
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninst all]#./uninstall.sh
4 Click Next. 
5 Click  Finish . 
						

							2. Using a Network-Connected Machine
This chapter gives you step-by-step instructions for setting up a network connected machine and software.
• Useful network programs 147
• Wired network setup 148
• Installing driver over the network 151
• IPv6 configuration 156
• Wireless network setup 159
• Samsung Mobile Print 192
• Using the NFC feature 193
• AirPrint 198
• Google Cloud Print 200
 
Supported optional devices and features may differ according to your model (see "Features by 
model" on page 7).
  
						

							1472.  Using a Network-Connected Machine
Useful network programs
There are several programs available to setup the network sett ings easily in a 
network environment. For the network administrator especially, managing 
several machines on the  network is possible. 
 
• Before using the programs below, set the IP address first. 
• Some features and optional goods may not be available depending on 
model or country (see "Features by model" on page 7).
 
1 
SyncThru™ Web Service
The web server embedded on your ne twork machine allows you to do the 
following tasks (see "Us ing SyncThru™ Web Service" on page 264).
• Check the supplies information and status.
• Customize machine settings.
• Set the email notificati on option. When you set th is option, the machine 
status (toner cartridge shor tage or machine error) will be sent to a certain 
person's email automatically.
• Configure the network parameters nec essary for the machine to connect to 
various network environments.
2 
SyncThru™ Web Admin Service
Web-based machine management sol ution for network administrators. 
SyncThru™ Web Admin Service provides you  with an efficient way of managing 
network devices and lets  you remotely monitor and  troubleshoot network 
machines from any site with  corporate internet access. 
• Download this program from http ://solution.samsungprinter.com.
3 
SetIP wired network setup
This utility program allows you to select a network interface and manually 
configure the IP addresses for use with the TCP/IP protocol.
• See "IPv4 configuration using  SetIP (Windows)" on page 148.
• See "IPv4 configuration using  SetIP (Mac)" on page 149.
• See "IPv4 configuration using  SetIP (Linux)" on page 150.
 
• The machine that does not support th e network port, it will not be able 
to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
  
						

							1482.  Using a Network-Connected Machine
Wired network setup
4 
Printing a network configuration report
You can print Network Configuration Report  from the machine’s control panel 
that will show the current  machine’s network settings. Th is will help you to set 
up a network.
Press the   ( Menu) button on the cont rol panel and select Network > 
Network Conf.  (Network Configuration ).
Using this  Network Configuration Report , you can find your machine’s MAC 
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 169.254.192.192
5 
Setting IP address
 
• The machine that does not support th e network interface, it will not be 
able to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
 
First, you have to set up  an IP address for network  printing and managements. 
In most cases a new IP address will be  automatically assigned by a DHCP 
(Dynamic Host Configurat ion Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program,  disable the computer firewall from Control 
Panel  > Security Center  > Windows Firewall .
 
The following instructions ma y differ for your model. 
 
1Download the software from the  Samsung website then unpack and 
install it: (http://www.samsung.com >  find your product > Support or 
Downloads).
2 Follow the instructions in  the installation window. 
						

							Wired network setup
1492.  Using a Network-Connected Machine
3 Connect your machine to the network with a network cable.
4 Turn on the machine.
5 From the Windows Start menu, select  All Programs  > Samsung 
Printers  > SetIP  > SetIP .
6 Click the   icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
7 Enter the machine’s new information  into the configuration window. In 
a corporate intranet, you  may need to have this information assigned by 
a network manager before proceeding.
 
Find the machine’s MAC address from the  Network Configuration Report 
(see "Printing a network configuration  report" on page 148) and enter it 
without the colons. For example, 00:15:99:29:51:A8 becomes 
0015992951A8.
 
8 Click  Apply , and then click  OK. The machine will automatically print the 
Network Configuration Report . Confirm that all the settings are 
correct.
IPv4 configuration using SetIP (Mac)
Before using the SetIP program,  disable the computer firewall from System 
Preferences  > Security  > Firewall .
 
The following instructions  may vary from your model.
 
1Connect your machine to the network with a network cable.
2 Insert the supplied software CD  into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Mac desktop.
• For Mac OS X 10.8, Double-click th e CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder >  Installer OS X icon.
5 Click Continue .
6 Read the license agreement and click  Continue.
7 Click Agree  to agree to the  license agreement. 
						

							Wired network setup
1502.  Using a Network-Connected Machine
8 Click Install. All components necessary for machine  operations will be 
installed.
If you click  Customize , you can choose individual  components to install.
9 Enter the password and click OK .
10 When the message that warns that a ll applications will close on your 
computer appears, click  Continue.
11 Select Network Connected Printe r(Wired or Wireless) on the  Printer 
Connection Type  and click Set IP Address  button.
12 Click the   icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
13 Enter the machine’s new information  into the configuration window. In 
a corporate intranet, you  may need to have this information assigned by 
a network manager before proceeding.
 
Find the machine’s MAC address from the  Network Configuration Report 
(see "Printing a network configuration  report" on page 148) and enter it 
without the colons. For example, 00:15:99:29:51:A8 becomes 
0015992951A8.
 
14 Click  Apply , and then click  OK. The machine will automatically print the 
Network Configuration Report . Confirm that all the settings are 
correct.
IPv4 configuration using SetIP (Linux)
Before using the SetIP program,  disable the computer firewall from System 
Preferences  or Administrator .
 
The following instructions may vary fr om your model or operating systems.
 
1Open /opt/Samsung /mfp /share /utils /.
2 Double-click the  SetIPApplet.html file. 
3 Click to open the TCP/IP configuration window. 
4 Enter the machine’s new information  into the configuration window. In 
a corporate intranet, you may need to  have this information assigned by 
a network manager  before proceeding.
 
Find the machine’s MAC address from the  Network Configuration Report 
(see "Printing a network configuration  report" on page 148) and enter it 
without the colons. For example, 00:15:99:29:51:A8 becomes 
0015992951A8.
 
5 The machine will automatically print the  Network Configuration 
Report .