Runco X 450d Projector User Manual

							XtremeProjection™ Series
X-400d and X-450d
Active 3D Home Theater Projection System
INSTALLATION/OPERATION MANUAL 
						

							Runco X-400d/X-450d Installation/Operation Manual iii 
PREL
IMINARY
RuncoCare™ Standard Two Year Limited 
Warranty
Congratulations on your purchase of a Runco® product! With proper installation, setup and care, you should enjoy many years 
of unparalleled video performance. 
This Limited Warranty is provided free of charge by Runco International, LLC (“Runco”) with the purchase of a covered Runco 
product. This Limited Warranty is applicable to all Runco projectors, processors, LCD display and plasma display products, 
with the exception of the following models: XP-103DHD, SC-1 and SC-1a
1. This Limited Warranty applies to purchases of 
covered Runco products occurring on or after June 1, 2011. 
Runco warrants its products to be free from defects in material and workmanship during the warranty period provided below. If 
a product proves to be defective in material or workmanship during the warranty period, Runco will repair the product, replace 
the product with a substantially similar new or like-new product, or refund a prorated share of the purchase price (calculated 
based on the remainder of the warranty period and the then-current, most-recent MSRP
2 of a similar product), if repair or 
replacement of the product is determined by Runco to not be feasible. 
Runco products are warranted for two (2) years from the date of shipment from Runco. Lamps are warranted six (6) months 
from the date of shipment or 1000 hours of use, whichever comes first. A replacement lamp is warranted for the remaining 
portion (if any) of the original warranty period or ninety (90) days from the date it was shipped to you, whichever is longer. All 
other accessories, which include but are not limited to cables, remotes, carrying cases, lens cap and other peripherals sold 
with the Runco product, are warranted for ninety (90) days from the date of shipment.
This Limited Warranty is valid only in the country where the Product was originally purchased and for the buyer who originally 
purchased the covered product from the authorized Runco dealer or distributor. This warranty is not transferable; it is not valid 
for any subsequent buyer (if any). You may be required to provide proof of purchase in order to receive warranty services. 
1. Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates will 
not apply on a retroactive basis.
RuncoCare™ Limited Warranty Coverage
2. MSRP is defined as the most recent product price listed on Runco’s price list.
Length of RuncoCare™ Warranty Period
RuncoCare™ Eligibility 
						

							iv Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
 In the event of a product defect, please follow the claim procedure provided below: 
A. Register your product if you have not yet done so. Visit http://www.runco.com/support/product-registration/ to 
register the product. 
B. Contact your original authorized dealer or distributor who sold the product. 
C. The dealer/distributor will contact Runco Technical Support via email at [email protected] or via phone at 1-800- 
23-RUNCO (1-800-237-8626). 
 The dealer/distributor will provide to Runco proof of purchase, serial number, product model number, description of the 
problem and any troubleshooting steps already attempted. 
 Runco’s technical support staff will attempt to assist the dealer/distributor in troubleshooting any technical issues that might 
be causing the product to malfunction. If Runco is unable to resolve the problem through troubleshooting, a Return Material 
Authorization (RMA) number will be issued for the exchange of the defective product if it is determined that the claim is 
covered by the warranty. Once an RMA has been created, RMA status is available at [email protected]. 
 If an RMA is issued, the dealer or customer will need to return the defective product to the Runco repair depot location 
specified by the Runco technical support representative. The dealer or customer will need to properly package the defective 
product in a suitable shipping container consisting of the product only, and not include any accessories (e.g., cables, 
remotes, carrying cases, lens, lens cap and other peripherals). Boxes may be purchased from a Runco technical support 
representative. 
 The dealer or customer is responsible for paying freight charges and insurance to ship the defective product to the Runco 
repair depot location. If there are any shipping damages, the dealer or customer will need to address and resolve any 
shipping damage claims directly with the shipping company. 
 Runco will not accept a returned product unless an RMA has been issued by Runco. 
 For in-warranty repairs, Runco will pay freight charges to return the repaired/replacement product to the dealer/distributor 
from the Runco repair depot. For select countries or geographies Runco will ship via an economy express service. Return 
delivery time and availability may vary based on origin and destination, and Runco is unable to deliver to PO Box and FPO 
Box addresses. 
 Note: in the 48 contiguous United States, other options for on-site service or advance exchange for the product may apply, 
if you purchased the Runco PremierCare™ Service Plan. 
1. Return only the defective product with the lamp (if applicable). 
2. Runco will not be responsible for returning or replacing any accessories (e.g., cables, remotes, carrying cases, lens, lens 
cap and other peripherals sold with the Runco product) that are returned with the defective product. 
3. Repaired or replacement products will be shipped with a lamp (if applicable) but without any accessories. 
This Limited Warranty does not include and is limited by the following: 
1. Products not purchased from an authorized Runco dealer 
2. Rental costs incurred by the customer in the event of product defect or failure 
3. Any product with a defaced, modified, or removed serial number 
RuncoCare™ Standard Claim Procedure
What to Include with Your Return
RuncoCare™ Warranty Exclusions 
						

							Runco X-400d/X-450d Installation/Operation Manual v 
PREL
IMINARY
4. Damage, deterioration, or malfunction resulting from: 
A. Accident, abuse, misuse, neglect, improper ventilation, fire, water, disaster, lightning, or other acts of nature, smoke 
exposure (cigarette or otherwise), unauthorized product modification (including use of an unauthorized mount), or 
failure to follow instructions supplied with the product 
B. Repair or attempted repair by anyone not authorized by Runco 
C. Any damage to the product due to shipment 
D. Removal or installation of the product 
E. Causes external to the product, such as electric power fluctuations or failure 
F. Use of supplies or parts (including lamps) that are not purchased from Runco or do not meet Runco’s specifications
G. Normal wear and tear 
H. Expected lamp degradation and normal decrease in lamp output over a period of time or as the lamp is consumed 
I. Customer caused defects, including but not limited to, scratched/defaced/altered plastics 
J. Failure to follow maintenance procedures as outlined in the product’s user guide where a schedule is specified for 
regular cleaning of the product 
K. Opening the product and/or tampering with internal circuitry 
L. Products lost, stolen or discarded 
M. Any damage or dissatisfaction associated with latent images, “burnin,” or any other damage determined by Runco to 
be the result of customer use patterns 
N. Any other cause, which does not relate to a product defect in material or workmanship 
5. Removal, installation, and set-up service charges are excluded from the warranty. 
6. Black uniformity issues or other LCD issues associated with usage outside the Runco recommended guidelines and 
specifications for the product. 
7. Bright or dark sub pixels that are characteristic of LCD technology and considered by Runco to be acceptable and within 
Runco’s manufacturing specifications.
Specifically, it is not uncommon for one or more sub pixels to become bright or dark during or after the manufacturing 
process. A bright sub pixel is one that remains in the on position, and a dark sub pixel is one that appears black or off. The 
sub pixels are usually hard to see and will not detract from the display quality or usability at normal viewing distance. The 
following are Runco’s criteria for identifying bright or dark sub pixels that would be considered unacceptable: a) the 
number of bright or dark sub pixels; b) the location of the bright or dark sub pixels; c) the color of the bright sub pixels; and 
d) the Runco model size. If sub pixels have been identified as unacceptable by Runco the LCD will be deemed faulty and 
will be replaced if reported within the warranty period. 
1. If the defective product is not properly packaged and is damaged in transit during its return to Runco, you may be invoiced 
for either the repair costs, if repairable, or the MSRP of a replacement product and shipping costs incurred by Runco. 
2. The repaired or replaced product will assume the remainder of your original product’s warranty term or 90 days from the 
date the repaired or replaced product is shipped, whichever is longer. 
3. If a replacement product is sent, the replacement becomes the property of the customer and the defective product 
becomes the property of Runco. 
Other Terms and Conditions 
						

							vi Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Runco offers extended and expanded service plans. For information on additional product protection, please ask your 
authorized Runco dealer, email [email protected] or call (toll free) (800) 23RUNCO (800-237-8626). 
RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED IN THIS 
DOCUMENT. RUNCO EXPRESSLY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, INCLUDING THE IMPLIED 
WARRANTIES OF TITLE, NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
RUNCO’S MAXIMUM AGGREGATE LIABILITY IS LIMITED TO THE COST OF REPAIR, REPLACEMENT OR REFUND OF THE 
PRODUCT. 
RUNCO WILL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY OR FOR DAMAGES BASED UPON INCONVENIENCE, 
LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF 
GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL OR FINANCIAL LOSS, EVEN IF 
RUNCO IS AWARE OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF A REMEDY HAS FAILED OF ITS ESSENTIAL 
PURPOSE. 
RUNCO WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, EXEMPLARY, SPECIAL, PUNITIVE OR 
ANY OTHER TYPE OF DAMAGES, WHETHER THE CLAIM IS BASED ON CONTRACT, TORT, PRODUCT LIABILITY, 
NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL OR EQUITABLE THEORY. 
RUNCO WILL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. 
This Limited Warranty gives you specific legal rights, and you may have other rights, which vary from locality to locality. Some 
localities do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential 
damages, so the above limitations and exclusions may not apply to you. 
© Copyright 2012 Runco International, LLC (“Runco”). This document contains proprietary information protected by copyright, 
trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any 
mechanical, electronic or other means, in any form, without prior written permission of Runco.
The trademarks reproduced in this Runco Owner’s Manual and used on the Runco Products are either owned by Runco or are 
licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco. 
Runco Products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents 
Pending.
RuncoCare™ Extended Service Options
Exclusion of Implied Warranties
Limitation of Liability; Exclusion of Damages
Effect of Local Law
COPYRIGHT AND TRADEMARKS:  
						

							Runco X-400d/X-450d Installation/Operation Manual vii 
PREL
IMINARY
Thank you for your purchase of this quality Runco video product! For the best performance, please read this manual carefully 
as it is your guide through the menus and operation.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that 
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider 
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is 
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of 
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point 
where they exit from the apparatus. 
11. Only use the attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. 
When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in 
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The +12V trigger only outputs 12Vdc signal for triggering. Do not connect to any other power input or output. This could 
cause damage to this unit.
16. Keep the packing material in case the equipment should ever need to be shipped.
17. The lamp becomes extremely hot during operation. Allow the projector to cool down for approximately 45 minutes prior to 
removing the lamp assembly for replacement. 
18. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to 
explode in rare occasions.
19. Never look directly into the lens when the lamp is on. 
Important Safety Instructions
WARNING
This symbol is intended to alert the user to the presence of 
uninsulated “dangerous voltage” within the product’s enclosure 
that may be of sufficient magnitude to constitute a risk of electric 
shock.
This symbol is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the 
literature accompanying the appliance. 
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK 
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. 
						

							viii Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Please read and make sure you understand the following safety information before using the product for viewing 3D content. 
Provide this information to the end users of this product and ensure that they understand it. 
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D VIEWING: 
It is widely recognized that stereographic display devices can cause discomfort, including, without 
limitation, dizziness, nausea, headaches, eye fatigue and eye-strain, in some individuals.  The 3D 
effect and experience will vary by individual, depending on a variety of factors, including his or her 
health and vision.  Runco recommends that users take regular breaks when watching 3D video or 
playing games using stereoscopic displays.  Discontinue use if any discomfort occurs.  Parents of 
young children should ensure their children avoid extensive exposure to electronic stereographic 
entertainment.
The quality and appropriateness of the 3D screen materials onto which the image is projected and 
the quality of the 3D content being displayed both have a significant and noticeable impact on the 
overall 3D experience.  A properly-calibrated projection system, including glasses and an 
optimized third-party screen, displaying high-quality 3D content is the best formula for immersive 
and comfortable 3D experiences in the home.  Please refer to the remainder of this manual for 
proper projector installation and usage instructions.  
The glasses that accompany this product are not safe to use as sunglasses, protective eyewear or 
any use outdoors or other than only in conjunction with the proper operation of the Runco product 
with which they are sold.  It is common to dim the lights in a home theater.  Using 3D glasses and 
the immersive imagery of stereoscopic imagery can increase the risk of tripping or falling the dark.  
Special care should be taken.
Do not tilt your head while using the 3D glasses. 
WARNING 
						

							Runco X-400d/X-450d Installation/Operation Manual ix 
PREL
IMINARY
Manufacturer’s Name:  Runco International, LLC
Manufacturer’s Address: 1195 NW Compton Drive, Beaverton, OR 97006-1992
hereby declares that the Products’ Model Numbers: 
X-400d, X-400d/CineWide, X-400d/CineWide with AutoScope, X-450d, X-450d/CineWide and X-450d/CineWide with 
AutoScope
conform with the provisions of: 
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment” 
1998;
EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998;
Including:
 EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: 
Electrostatic discharge immunity test”
 EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated, 
Radio-Frequency, Electromagnetic Field Immunity Test” 
 EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical 
fast transient/burst immunity test”
 EN 61000-4-5 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge 
immunity test
 EN 61000-4-6 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted 
disturbances induced by radio-frequency fields immunity test
 EN 61000-4-8 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted 
disturbances induced by power frequency magnetic fields immunity test
 EN 61000-4-11 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage 
dips, short interruptions and voltage variations immunity tests
And:
 EN 61000-3-2 Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment 
input current up to and including 16 A per phase) 2000;
 EN 61000-3-3 Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage 
fluctuations and flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A 
and not subject to conditional connection 1995;
Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;
EN 60950 “Safety of information technology equipment, including electrical business equipment”
The Technical Construction file required by this Directive is maintained at the corporate headquarters of Runco International, 
LLC, located at 1195 NW Compton Drive, Beaverton, OR 97006-1992. 
Date of Declaration: September 2012
Compliance Information
DECLARATION OF CONFORMITY:  
						

							x Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The Product contains small amounts of tin, lead and/or mercury. Disposal of these materials may be regulated due to 
environmental considerations.
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be 
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. 
For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. 
For lamp specific disposal information check WWW.LAMPRECYCLE.ORG. 
This symbol found on your product or on its packaging, indicates that this product should not be treated as 
household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection 
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, 
you will help prevent potential negative consequences to the environment and human health, which could 
otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve 
natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please 
contact your local authorities or dealer and ask for the correct method of disposal.
FCC PART 15: 
INDUSTRY CANADA (ICES-003): 
PRODUCT DISPOSAL: 
IMPORTANT RECYCLE INSTRUCTIONS
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European 
Union and other European countries with separate collection programs)