Runco Vx 6c Projector User Manual

OPERATION
Menu
Press        to display the Runco Digital Home Cinema menu. A list of several options appears for
access to specific functions, such as Memory BanksorImage Adjustments.Press        again to
remove all menus and return to the displayed source.
Enter
Press        to select a highlighted item, to toggle a checkbox (checked vs. unchecked), or to accept
a parameter adjustment and return to the previous menu or image.
Exit
Press        to return to the previous level, such as the previous menu....

OPERATION
z+=turn the audio and menu display on
+=turn the audio and menu display off
z+=turn the menu system on
+=turn the menu system off
Color
Press          to adjust the color saturation level, i.e. the amount of color in a video image. Lower
settings produce less saturated colors - a setting of 0 produces a black and white image, for
example. If the color level is too high, colors will be overpowering and unrealistic. Use        and
until the         desired color saturation level is displayed....

OPERATION
Position
Press          to move the image using the double slidebar. At the slidebar, use          and          to
move the image left or right, use        and         to move the image up or down.
Shutter
(OPTIONAL)
If your projector has a mechanical lens shutter (a.k.a. dowser) installed, press and hold          for
approximately 1 second to toggle the shutter closed or open with a single key press (this also
blanks the image electronically). Or quickly press and release          and follow...

OPERATION
OSD (On-screen display)
Press and hold           for approximately 1 second to toggle menus on or off (i.e., visible or invis-
ible). Or press          followed immediately by                     to guarantee the correct toggle direc-
tion (useful if you are unsure of the present status). Note that invisible menus are fully function-
al.
NOTES: 1) With OSD on, you can still mute menus, error messages, slidebars, etc. with the
appropriate setting in the OSD Settings menu. 2) The status of the...

OPERATION
3.4 Navigating the Menus
Most of the controls for the projector are accessed from with-
in the projectors menu system. There are several groups of
related functions, with each group selectable from the Runco
Digital Home Cinemamenu as shown at right. Press        at
any time to display the Runco Digital Home Cinemamenu. 
On the keypad, either enter the number corresponding to the
function menu you wish to access, such as      for the Image
Adjustmentsmenu, or use the           keys to highlight...

OPERATION
Accessing General Help Topics
T
ime-outs
Whenever there are on-screen menus such as when there is a slidebar, menu, message or test pat-
tern displayed, you have limited time in which to make a keypad entry before the graphic disap-
pears. These time-outs vary depending on the current display, as shown in the following chart:
Using Slidebars and Other Controls
Most of the function menus allow you to change settings by using slidebars, checkboxes, and
pull-down lists. To select a slidebar,...

OPERATION
Double slidebars - In double slidebars, such as the
pixel tracking/pixel phase double slidebar, adjust the
top slidebar with          or          as desired. When you
have finished with the top slidebar (whether changed
or not), adjust the bottom slidebar with                     .
When you are done, press        to return to your pres-
entation. For fast continuous adjustments, hold down
the desired arrow key.
Direct slidebars- For quick access, you can often use a slidebar (or double...

OPERATION
Example of Pull-Down List
Or, if you prefer to quickly scroll through a list without first pulling it down, highlight the option
and use          or          . Press        when the desired choice appears.
NOTES: 1) Press          or           to jump between pages in an extra long pull-down list. 2) Press  
while in a pull-down list to cancelany change.
Editing 
Text
ACTIVATE THE EDIT WINDOW: To enter or edit text, highlight the desired parameter (such
as a Memory Bank name) and press      to...

OPERATION
NOTE: Press         at any time to cancel changes and return to the previously-defined text.
Editing Numerical Values 
Enter numbers directly from the keypad in order to specify numbers representing projectors,
Memory Banks (source setups), switchers, or slots. As each digit is entered, it is displayed and the
cursor moves on. Note that Memory Bank numbers are defined with 2 digits-for example, if you
enter only a single digit (like 7) for a Memory Bank number, the Memory Bank will automati-...

OPERATION
MEMORY BANK- A Memory Bank is a collection of measurements, locations and settings that
tailor a display to your specific needs. Since source types and applications can vary greatly, you
will likely want to adjust and define a wide variety of parameters, such as brightness, contrast,
tint, size, etc., in order to customize and optimize the display coming from a particular source.
For example, the display settings you choose for a VCR source may be very different from those
you choose for a high...