Roland XC 540 User Manual

6-12 Viewing System Information
119Chapter 6 Feature Reference
Description
You can view the following information.
[IP ADDRESS]: IP ADDRESS
[SUBNET MASK]: SUBNET MASK
[GATEWAY ADDRESS]: GATEWAY ADDRESS
[MAC ADDRESS]: MAC ADDRESS
Printing a System Report
Procedure

Press .
Press 
 several times.
Press .
Press 
 several times.
Press 
 to start printing,
Press .
Press 
 to go back to original screen.
Description
This prints system information, including a list of setting values.
W  1346mm
SETUP    SHEET...

120Chapter 6 Feature Reference
6-13 Performing Maintenance
Draining Ink and Performing Internal Washing
Procedure

Press .
Press 
 several times.
Press .
Press 
 twice.
Press .
Press 
 twice.
Press 
 to execute.
Description
This drains the ink inside the printer and washes the interior using cleaning cartridges as a preliminary for moving the
printer or conducting maintenance. This operation requires eight unused cleaning cartridges. The screen displays
information such as instructions to insert and...

121Chapter 6  Feature Reference
6-14 Menu List
Main menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LOAD
NAME1
LOAD
NAME2
  To the [CUTTING MENU] menu  To the [NAME] menu
LOAD
NAME4
LOAD
NAME6
  To the [NAME8] menu
  To the [NAME1] menu
SAVE
NAME1
SAVE
NAME2
SAVE
NAME4
SAVE
NAME6
  To the [NAME8] menu
  To the [NAME1] menu
Continue Continue
Press 
LOAD
NAME3
LOAD
NAME5
LOAD
NAME7
LOAD
NAME8
SAVE
NAME3
SAVE
NAME5
SAVE
NAME7
SAVE
NAME8
Continue
Downloaded From ManualsPrinter.com Manuals 

6-14 Menu List
122Chapter 6 Feature Reference
PRESET
NAME
NAME
_NAME
NAME3
NAME
NAME5
NAME
NAME7
NAME
NAME8
  To the [NAME1] menu
  To the [LOAD] menu
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
Continue Continue
MENU
ADJUST BI-DIR
ADJUST BI-DIR
SIMPLE SETTING
ADJUST BI-DIR
DETAIL SETTING
ADJUST BI-DIR
TEST PRINT
SIMPLE SETTING
00
DETAIL SETTING
SETTING NO.1
DETAIL SETTING
TEST PRINT
  To the [DETAIL SETTING] menu
  To the 
  [TEST PRINT] menu
  To the [SETTING No.4] menu
  To the [TEST PRINT] menu...

6-14 Menu List
123Chapter 6  Feature Reference
VACUUM POWER.
AUTO
SUB MENU
FACTORY DEFAULT
Continue Continue
Continue
INK CONTROL
EMPTY MODE
SUB MENU
SLEEPSLEEP
INTERVAL
SLEEP
SETTINGSETTING
ENABLEENABLE
SUB MENU
SYSTEM REPORT
SUB MENU
INK CONTROLEMPTY MODE
STOPSTOP
INTERVAL
15min15min
CHANGE INK SET
E-SOL Max LcLm
  To the [SETTING] menu
  To the [INTERVAL] menu
SUB MENU
ALTERNATE HEAD
PERIODIC CL.
NONENONE
INK CONTROL
PUMP UP
INK CONTROL
HEAD WASH
SUB MENU
PERIODIC CL.
MAINTENANCE
REPLACE WIPER
INK...

6-14 Menu List
124Chapter 6 Feature Reference
SYSTEM INFO .
MODEL
SYSTEM INFO .
INK
SYSTEM INFO .
FIRMWARE
Continue
MENU
SYSTEM INFO .MODEL
XC-540
SYSTEM INFO .
SERIAL NO .SERIAL NO .
ZS00001
INK
E-SOL Max LcLm
FIRMWARE
Ver.1.00
To the [NETWORK] menu
To the [MODEL] menu
MENU
INK REMAINING
SHEET REMAIN
SET LENGTH
MENU
SHEET REMAINSHEET REMAIN
PRINT MEMO
SET LENGTH
0.0 m0.0 m
To the [AUTO DISPLAY] menu
To the [PRINT MEMO] menu
SHEET REMAIN
AUTO DISPLAYAUTO DISPLAY
DISABLEDISABLE
1               2...

6-14 Menu List
125Chapter 6  Feature Reference
CUTTING MENU
PRINT-CUT ADJ .PRINT-CUT ADJ .
TEST PRINT
Continue
MENU
CUTTING MENUTo the [AUTO ENV. MATCH] menu
To the [TEST PRINT] menu
To the [TEST PRINT 2] menu
To the
 [PRESET] menu
F  :  +  0  .  0  0        0  .  0  0  m
S  :  +  0  .  0  0        0  .  0  0  m
CUTTING MENU
CALIBRATION
To the [FEED SETTING] menu
To the [SCAN SETTING] menuFEED SETTING
0  .  0  0  %
SCAN SETTING
0  .  0  0  %
CUTTING MENU
PREFEED
CUTTING MENU
CUTTING PRIOR
PREFEED...

6-14 Menu List
126Chapter 6 Feature Reference
Langage and Unit Menu
Cleaning Menu
Heater Configration Menu
MENU LANGUAGE
ENGLISH
Hold down                        and switch on the sub power.
LENGTH UNIT
mmmm
TEMP UNIT
  C  C
CLEANING
NORMAL CL.
CLEANING
MEDIUM CL.
  To the [POWERFUL CL.] menu
  To the [NORMAL CL.] menu
NORMAL CL.
        ABC
MEDIUM CL.
        ABC
CLEANING
POWERFUL CL.POWERFUL CL.
        ABC
Press
Press
PRE              40        PRINT          40
DRYER         50
PRE...

6-14 Menu List
127Chapter 6  Feature Reference
Press
FORCE
5  0  gfSPEED
2  0  cm/sOFF SET
0  .  2  5  0  mm5  0  gf2  0  cm/s0  .  2  5  0  mmUP SPEED
2  0  cm / s2  0  cm / s
Cut Configration Menu
Downloaded From ManualsPrinter.com Manuals 

128
Downloaded From ManualsPrinter.com Manuals