Ricoh Mp C3000 Service Manual

 
SM 5-413 B230/B237/D042 
Service 
Tables 
5.  Enter the SP mode. 
6.  Do SP5-846-052 (Restore All Addr Book). 
7.  Exit the SP mode, and then turn off the main power switch. 
8.  Remove the SD card form the SD card slot 3. 
9.  Install the slot cover 3. 
 
ƒ  The counter in the user code inform ation is initialized after uploading. 
ƒ  The information of an administrator  and supervisor cannot be downloaded nor 
uploaded. 
ƒ  If there is no data of address book informat ion in the SD card, an error...

 
B230/B237/D042 5-414 SM 
 
Key  What it does 
LANG. 1(1) Touch this button on the screen (or press   on the 10-key pad) to 
open the next screen so you  can select the 1st language. 
LANG. 1(2) Touch this button on the screen (or press   on the 10-key pad) to 
open the next screen so you  can select the 2nd language. 
Exit(0) Touch this key on the screen (or press   on the 10-key pad) to 
quit the update procedure and return to normal screen. 
 
6.  Touch “LANG 1(1)” to select the 1st Language. Touch...

 
SM 5-415 B230/B237/D042 
Service 
Tables 
 
9.  Touch “Update(#)” on the screen (or press 
) to start the download. 
Another screen with a progress bar does not  show when the language is downloading.   
The following occur at the time the language is downloading: 
ƒ  The operation panel switches off. 
ƒ  The LED on the power on key flashes rapidly.   
10.  After the message of installation comp leted has shown on the LCD, switch the 
copier main power switch off. Then remove the SD card from the slot....

 
B230/B237/D042 5-416 SM 
30 No HDD available for stamp 
data download  HDD connection incorrect or replace hard disks. 
31 
Data incorrect for continuous 
download  Insert the SD card with the remaining data 
required for the download, the re-start the 
procedure.  
32 
Data incorrect after download 
interrupted  Execute the recovery procedure for the intended 
module download, then repeat the installation 
procedure. 
33  Incorrect SD card version 
Incorrect ROM data on the SD card, or data is...

 
SM 5-417 B230/B237/D042 
Service 
Tables 
failed  card is for another machine. Acquire correct 
update data then install again. 
 
5.7  SD CARD APPLI MOVE 
5.7.1 OVERVIEW 
The service program “SD Card Appli Move”  (SP5-873) lets you to copy application 
programs from one SD card to another SD card. 
Slot 1 and Slot 2 are used to store applic ation programs. But there are 3 possible 
applications (PostScript 3, DOS unit, Pict Bridge). You cannot run application programs 
from Slot 3. However you can...

 
B230/B237/D042 5-418 SM 
 
 
3.  Remove the cover [A] (
 x 2). 
4.  Keep the SD card in the place [B] afte r you copy the application program from 
one card to another card. This is done for the following reasons: 
1.  The SD card can be the only proof that  the user is licensed to use the application 
program.  
2.  You may need to check the SD card and its data to solve a problem in the future. 
5.  You cannot copy PostScript data to another SD card. You have to copy other  data to the same SD card...

 
SM 5-419 B230/B237/D042 
Service 
Tables 
8.  Turn the main switch off. 
9.  Remove the SD card from SD Card Slot 3. 
10.  Turn the main switch on. 
11.  Check that the application programs run normally. 
 
5.7.3 UNDO EXEC 
The menu “Undo Exec” (SP5-873-002) lets y ou copy back application programs from an 
SD card to the original SD card. You can us e this program when, for example, you have 
mistakenly copied some programs by using Move Exec (SP5-873-001). 
 
ƒ  Do not turn ON the write protect...

 
B230/B237/D042 5-420 SM 
5.8 CONTROLLER SELF-DIAGNOSTICS 
5.8.1 OVERVIEW 
There are three types of self-diagnostics for the controller. 
1.  Power-on self-diagnostics: The machine autom atically starts the self-diagnostics just 
after the power has been turned on. 
2.  Detailed self-diagnostics: The machine does the detailed self-diagnostics by using a  loop-back connector (P/N G0219350) 
3.  SC detection: The machine automatically detects SC condi tions at power-on or during 
operation. 
The following...

 
SM 5-421 B230/B237/D042 
Service 
Tables 
 
 
Rev. 04/07/2009 

 
B230/B237/D042 5-422 SM 
 
5.8.2 DETAILED SELF-DIAGNOSTICS 
In addition to the self-diagnostic test initiated every time the main machine is powered on, 
you can set the machine in a more detailed di agnostic mode manually. This lets you test 
other components or conditions that are not  tested during self-diagnosis after power on. 
The following device is required in order to  put the machine in the detailed self-diagnosis 
mode: 
 
No.  Name 
G0219350  Parallel Loopback Connector 
 
Executing...