Ricoh Mp C3000 Service Manual

 
SM 5-403 B230/B237/D042 
Service 
Tables 
[Compression ratio of ClearLight PDF]   
2024 
Selects the compression ratio for clearlight  PDF for the two settings that can be 
selected at the operation panel. 
2024 1  Compression Ratio (Normal image)  [5 to 95 / 20 / 1 /step ] 
2024 2  Compression Ratio (High comp image)  *CTL
[5 to 95 /  20 / 1 /step ] 
 
5.5  REBOOT/SYSTEM SETTING RESET 
5.5.1 SOFTWARE RESET 
You can reboot the software with one of the following two procedures: 
1.  Turn the main power...

 
B230/B237/D042 5-404 SM 
Copier Setting Reset 
Use the following procedure to reset the copy settings in the UP mode to their defaults. 
1. Press User Tools/Counter 
. 
2. Hold down 
  and then press Copier/Document Server Settings. 
 
ƒ  You must press 
 first. 
 
3.  Press “Yes” when the message prompts you  to confirm that you want to reset the 
Copier Document Server settings. 
4.  Press exit when the message tells y ou that the settings have been reset. 
 
5.6 FIRMWARE UPDATE 
To update the...

 
SM 5-405 B230/B237/D042 
Service 
Tables 
Application controller  board 
Netfile Application  Feature  application Printer/scanner 
SD card NetworkDocBox 
Printer Application 
Feature application  Printer/scanner 
SD card SD Printer 
Scanner 
Application  Feature application  Printer/scanner 
SD card SD Scanner 
Fax Application  F
eature application  Flash ROM on the 
controller board Fax 
NIB Network 
Interface Printer/scanner 
SD card  Network 
Operation Panel  Panel control 
 Operation Panel...

 
B230/B237/D042 5-406 SM 
 
5.6.2 BEFORE YOU BEGIN 
An SD card is a precision device. Always observe the following precautions when you 
handle SD cards: 
ƒ  Always switch the machine off before you insert an SD card. Never  insert the SD card 
into the slot with the power on. 
ƒ  Do not remove the SD card from the serv ice slot after the power has been switched on. 
ƒ  Never switch the machine off while the  firmware is downloading from the SD card. 
ƒ  Keep SD cards in a safe location where they are...

 
SM 5-407 B230/B237/D042 
Service 
Tables 
 
5.6.3 UPDATING FIRMWARE  
Preparation 
1.  If the SD card is blank, copy the ent ire “romdata” folder onto the SD card. 
2.  If the card already contains the “romdata”  folder, copy the “B230” folder onto the card. 
If the card already contains folders up to “B 230”, copy the necessary firmware files (e.g. 
B230xxxx.fwu) into this folder. 
 
ƒ  Do not put multiple machine firmware 
programs on the same SD card. Copy 
the only model firmware you want. 
ƒ...

 
B230/B237/D042 5-408 SM 
 
ROM/NEW   What it means 
ROM: Tells you the number of the module 
and name of the version currently 
installed. The first line is the module number, the second line the 
version name. 
NEW:  Tells you the number of the module 
and name version on the SD card. 
The first line is the module number,  the second line the version name. 
 
8.  Touch “UpDate (#)” (or 
) to start the update. 
 
ƒ  The progress bar does not show for the operation panel firmware after you 
touch...

 
SM 5-409 B230/B237/D042 
Service 
Tables 
 
 
Recovery after Power Loss 
If the ROM update is interrupted as a result of ac cidental loss of power while the firmware 
is updating, then the correct  operation of the machine cannot be guaranteed after the 
machine is switched on again. If the ROM updat e does not complete successfully for any 
reason, then in order to ensure the correct  operation of the machine, the ROM update error 
will continue to show until the ROM is updated successfully. 
In this...

 
B230/B237/D042 5-410 SM 
5.6.5 DOWNLOADING STAMP DATA 
The stamp data should be downloaded from the controller firmware to the hard disks at the 
following times: 
ƒ  After the hard disks have been replaced. 
The print data contains the controller software. Execute SP 5853 to download the fixed 
stamp data required by the hard disks.   
1.  Enter the SP mode. 
2.  Select SP5853 and then press “EXECUTE”. The following screen opens while  the stamp data is downloading. 
 
The download is finished when...

 
SM 5-411 B230/B237/D042 
Service 
Tables 
3.  Insert the SD card into SD card slot 3. Then switch the copier on. 
4.  Execute SP5824-001 (NVRAM Data Upload) and then press the “Execute” key 
5.  The following files are coped to an NVRAM folder on the SD card when the 
upload procedure is finished. The file is saved to the path and the following 
filename:  
NVRAM¥.NV 
Here is an example with Serial Number “K5000017114”: 
NVRAM¥K5000017114.NV  
6.  In order to prevent an error during the download, be...

 
B230/B237/D042 5-412 SM 
5.6.7 ADDRESS BOOK UPLOAD/DOWNLOAD 
Information List 
The following information is possible to be uploaded and downloaded. 
Information  
ƒ Registration No. 
ƒ User Code 
ƒ E-mail 
ƒ Protection Code 
ƒ Fax Destination 
ƒ Fax Option 
ƒ Group Name 
ƒ Key Display  ƒ Select Title  
ƒ Folder 
ƒ Local Authentication 
ƒ Folder Authentication 
ƒ Account ACL 
ƒ  New Document Initial 
ACL 
ƒ LDAP Authentication 
Download 
1.  Prepare a formatted SD card.   
2.  Make sure that the...