Ricoh Mp C3000 Service Manual

 
SM 5-393 B230/B237/D042 
Service 
Tables 
6146 4  Staple Slide Pulse 
Motor  Stapler Unit Movement Motor 
6146 5 Stuck Exit Pulse 
Motor  Paper Reverse/Exit Motor 
6146 6 Pick Roller Pluse 
Motor  Pick-Up Roller Contact Motor 
6146 7  Staple DC Motor  Staple Unit Motor 
6146 8 Paper Tray Lift DC 
Motor  Output tray motor 
6146 9 Paper Detection 
SOL  Stack Height Lever Solenoid 
6146 10 Paddle Rotation 
SOL  Paddle Roller Solenoid 
6146 11  Belt SOL 
Belt Lift Solenoid 
 
5.2.4 TEST PATTERN PRINTING...

 
B230/B237/D042 5-394 SM 
5.  When you are prompted to confirm your selection, touch Yes to select the test pattern 
for printing. 
6.  Touch Copy Window to open the copy windo w, then select the settings for the test 
print (paper size etc.). 
 
ƒ  If you want to use black and white prin ting, touch Black & White on the LCD. 
If you want to use color printing,  touch Full Colour on the LCD. 
7.  Press the Start key to start the test print. 
8.  After checking the test pattern, touch S P Mode on the LCD...

 
SM 5-395 B230/B237/D042 
Service 
Tables 
5.3  PRINTER SERVICE MODE 
5.3.1  SP1-XXX (SERVICE MODE) 
1001  Bit Switch  
Bit Switch 1  0 1 
bit 0  DFU  - - 
bit 1  DFU  - - 
bit 2  DFU  - - 
No I/O Timeout   0: Disable  1: Enable bit 3 
Enable: The MFP I/O Timeout setting will have no effect. I/O Timeouts will 
never occur. 
SD Card Save Mode   0: Disable  1: Enable bit 4 
Enable: Print jobs will be saved to  an SD Card in the GW SD slot (
 “Card 
Save Function” in System Maintenance  Reference section...

 
B230/B237/D042 5-396 SM 
Applying a collation Type Shift 
Collate  Normal 
Collate bit 2 
A collation type (shift or normal) w ill be applied to all jobs that do not 
already have a ‘Collate Type’ configured. 
 
ƒ  If #5-0 is enabled, this Bi t Switch has no effect. 
[PCL5e/c,PS]: PDL Auto Switching  0: Enable  1: Disable bit 3 
Disable: The MFPs ability to change the PDL processor mid-job. 
Some host systems submit  jobs that contain both PS and PCL5e/c. If Auto 
PDL switching is disabled, these jobs...

 
SM 5-397 B230/B237/D042 
Service 
Tables 
bit 6  DFU  - - 
bit 7  DFU  - - 
 
1001  Bit Switch  
004 
Bit Switch 4  DFU  - - 
 
1001  Bit Switch  
005  Bit Switch 5  0 1 
  Show Collate Type, Staple Type and 
Punch Type buttons on the operation 
panel.
  Disable Enable 
 
bit 0 If enabled, users will be able to configure a Collate Type, Staple Type, and 
Punch Type from the oper
ation panel. The available types will depend on 
the device and conf igured options. 
After enabling the function, t he...

 
B230/B237/D042 5-398 SM 
 
bit 6  DFU  -  - 
 bit 7  DFU  -  - 
 
1001  Bit Switch  
006 
Bit Switch 6  DFU  - - 
 
1001  Bit Switch  
007 
Bit Switch 7  DFU  - - 
 
1001  Bit Switch  
Bit Switch 8  0 1 
bit 0  DFU  - - 
bit 1  DFU  - - 
bit 2  DFU  - - 
[PCL,PS]: Allow BW jobs to print without 
requiring User Code   Disable Enable bit 3 
Enable: BW jobs submitted without  a user code will be printed even if 
usercode authenticat ion is enabled. 
 
ƒ  Color jobs will not be print ed without a valid...

 
SM 5-399 B230/B237/D042 
Service 
Tables 
bit 7  DFU  - - 
 
1003   [Clear Setting] 
Initialize Printer System 
1003 1 
Initializes settings in the “S ystem” menu of the user mode. 
1003 3  Delete Program     
 
1004   [Print Summary] 
Print Summary 
1004 1 
Prints the service summary sheet (a su mmary of all the controller settings). 
 
1005   [Display Version] 
Disp. Version 
1005 1 
Displays the version of the controller firmware. 
 
1006   [Sample/Locked Print]  *CTL
0: Linked, 1: On 
1006 1...

 
B230/B237/D042 5-400 SM 
1101 3  Current  
1101 4  ACC   
 
[Resolution Setting] 
11 0 2 
Selects the printing mode (resolution) for the printer gamma adjustment. 
1102 1  2400x600 Photo
, 1800x600 Photo, 600 x 600  Photo, 2400x600 Text, 
1800x600, Text, 600x600 Text 
 
[Test Page] 
11 0 3 
Prints the test page to check the color balance before and after the gamma 
adjustment. 
1103 1  Color Gray Scale 
1103 2  Color Pattern 
 
[Gamma Adjustment] 
11 0 4 
Adjusts the printer gamma for the mode selected...

 
SM 5-401 B230/B237/D042 
Service 
Tables 
1104 41  Magenta: Highlight 
1104 42  Magenta: Shadow 
1104 43  Magenta: Middle 
1104 44  Magenta: IDmax 
1104 61  Yellow: Highlight 
1104 62  Yellow: Shadow 
1104 63  Yellow: Middle 
1104 64  Yellow: IDmax 
 
[Save Tone Control Value] 
11 0 5  Stores the print gamma adjusted with 
the “Gamma Adj.” menu item as the 
current setting. Before the machine stor es the new “current setting, it moves 
the data currently stored as the “current  setting” to the...

 
B230/B237/D042 5-402 SM 
5.4  SCANNER SERVICE MODE 
5.4.1  SP1-XXX (SYSTEM AND OTHERS) 
[Compression Type] 
1004 
Selects the compression type for binary picture processing. 
1004 1  Compression Type  *CTL [1 to 3 / 
1 / 1/step ] 
1: MH, 2: MR, 3: MMR 
 
[Erase margin]  
1005 
Creates an erase margin for  all edges of the scanned image. 
If the machine has scanned the edge of the original, create a margin. 
1005 1  Range from 0 to 5 mm  *CTL [0 to 5 / 0 / 1 mm/step ] 
 
1009  [Remote scan disable]...