Ricoh Mp C2003 User Guide

2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components Guide to Components 
(mainly Europe and Asia)
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.
Front and left view
1. Exposure glass cover or ADF
(The illustration shows ADF.)
Lower the exposure glass cover or the ADF over originals placed on the exposure glass. If you load a stack of originals in the ADF, the ADF will automatically...

3. VentsPrevent overheating.
4. Control panel See page 41 "Guide to the Names and Functions of the Machine's Control Panel (When Using the
Standard Operation Panel)" or page 44 "Guide to the Names and Functions of the Machine's Control Panel (When Using the Smart Operation Panel)".
5. Main power switch To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover andturn the switch on.
6. Internal tray 1 Copied/printed paper and fax...

Front and right view
1. ADF's extenderPull this extender to support large paper.
2. Vents Prevent overheating.
3. Bypass tray Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the papertrays.
4. Paper guides When loading paper in the bypass tray, align the paper guides flush against the paper.
5. Extender Pull this extender out when loading sheets larger than A4
, 81
/ 2 × 11 in the bypass tray.
Guide to Names and Functions of Components
31DAT002
1
23
4...

6. Lower right coverOpen this cover when a paper jam occurs.
7. Right cover Open this cover when a paper jam occurs.
Rear and left view
1. Vents Prevent overheating.
Guide to Components 
(mainly North America)
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.2. Getting Started
321
1 1
DAT003     

Front and left view
1. ADFLower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. Exposure glass Place originals face down here.
3. Vents Prevent overheating.
4. Control panel See page 41 "Guide to the Names and Functions of the Machine's Control Panel (When Using the
Standard Operation Panel)" or page 44 "Guide to the Names and Functions of the Machine's Control Panel
(When...

8. Paper trays (Trays 1–2)Load paper here.
9. Lower paper trays Load paper here.
Front and right view
1. ADF's extender Pull this extender to support large paper.
2. Vents Prevent overheating.
3. Bypass tray Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the papertrays.
2. Getting Started
34DAT002
1
23
4
5
2
6
7   

4. Paper guidesWhen loading paper in the bypass tray, align the paper guides flush against the paper.
5. Extender Pull this extender out when loading sheets larger than A4
, 81
/ 2 × 11 in the bypass tray.
6. Lower right cover Open this cover when a paper jam occurs.
7. Right cover Open this cover when a paper jam occurs.
Rear and left view
1. Vents Prevent overheating.
Guide to Names and Functions of Components
35  1
1 1
DAT003   

Guide to Functions of the Machine's Options
Guide to Functions of the Machine's External Options 
(mainly
Europe)
1. Exposure glass cover
Lower this cover over originals.
2. Lower paper tray Holds up to 550 sheets of paper.
3. Caster table for lower paper tray To use the lower paper tray, attach the caster table.
4. Lower paper trays Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
2. Getting Started
36 DAT005
7
4 5
2
3 8
6
1
9   

5. Internal tray 2If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
6. Internal shift tray Sorts and stacks multiple sheets of paper.
7. External tray If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.
8. Internal Finisher SR3130 Sorts, stacks, and staples multiple sheets of paper.
Copies can be punched if the optional punch unit is installed on the finisher.
9. Internal Finisher SR3180 Sorts...

1. Exposure glass coverLower this cover over originals.
2. ADF Load a stack of originals here. They will feed in automatically.
3. Smart Operation Panel This control panel is provided with advanced operativity.
4. Lower paper tray Holds up to 550 sheets of paper.
5. Caster table for lower paper tray To use the lower paper tray, attach the caster table.
6. Lower paper trays Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
7. Internal tray 2 If you select...