Ricoh Caplio R30 User Guide

							39
Quick Guide
1.Switch the Mode Selector to 5.
2.Press the ! button.
The still image mode selection screen 
appears.
3.Press the ! buttons to select a 
mode.
4.Press the M/O button.
The Mode’s symbol is displayed on the 
upper part of the LCD monitor.
5.Press the shutter release button.
Changing Scene Mode
Press the ! button to return to the still image mode selection screen.
Returning to Ordinary Shooting Mode
1.Press the ! button to return to the still image mode 
selection screen.
2.Press the ! button to select [NRML SHT]. 
3.Press the M/O button.
Shooting in Zoom Macro Mode
1.Turn the Mode Selector to 5.
2.Press the ! button.
The still image mode selection screen appears.
3.Press the ! buttons to select [ZOOM MACRO].
4.Press the M/O button.
5.Press the Z or z button.
The magnification appears on the LCD display.
6.Compose your picture and half-press the shutter release button.
7.Full-press the shutter release button.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							40
Using the skew correction function
1.Turn the Mode Selector to 5.
2.Press the ! button.
The still image mode selection screen appears.
3.Press the ! buttons to select [SKEW COR MODE].
4.Press the M/O button.
5.Press the shutter release button to shoot the subject.
Immediately after shooting, the area recognized as a correction range is 
displayed with an orange frame. 
Up to five areas can be recognized.
To select another correction area, move the orange frame to the required 
area by pressing the $ button.
6.Press the M/O button.
The corrected image is recorded. The image before correction is also 
recorded.
If the target area cannot be detected, an error message appears.
To cancel skew correction, press the ! button.
Even if you cancel skew correction, the image before skew correction 
remains recorded.
Note
• To shoot the subject as large as possible, position it so that its entire portion is seen on the 
LCD monitor.
• The camera may fail to recognize the subject in the following cases:
• When the image is out of focus
• When four edges of the subject are dim
• When it is hard to distinguish between the subject and background
• When the background is complicated
• Two images, one before correction and the other after correction, are recorded. If the 
number of remaining shots is less than 2, you cannot shoot the subject.
• If the camera fails in area detection, the image before correction remains recorded. 
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							41
Quick Guide
Playing Back
Checking the image you just took 
(Quick Review)
You can view the image you just took on the LCD monitor. 
If you are not pleased with the way the photo came out, 
you can erase it then and there.
1.While still in the Still Image Mode, 
press the Q (Quick Review) button.
The last image you took is displayed on the 
LCD monitor.
Note
• Once the power is turned off, the image you took cannot be displayed in the still image 
mode even if you press the Q button.
• If you use Quick Review to view the image taken in Text mode (see P.38), the displayed 
image may have slightly lower quality than the recorded one.
In Quick Review
QButton Returns to Shooting Mode.
8Button Enlarges the displayed still image. You can move around on the displayed 
image by pressing the !#$ buttons.
9Button Reduces the displayed still image enlarged by pressing the 8 button.
M/OButton Enlarges the displayed still image enlarged by pressing the 8 button to the 
maximum available magnification.
When displayed for the maximum size, it returns to a whole display.
DButton Deletes the currently displayed file. When the D button is pressed, a warning 
message about deleting the file appears. Select [DELETE] and press the 
M/O button.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							42
Viewing Your Images
In the Playback Mode you can check still images you 
have taken. You can also delete or zoom in on them.
1.Press the 6 (Playback) button.
The camera switches to Playback mode 
and the last still image you took is 
displayed.
You can view your pictures in order by 
using the #$ button.
To switch the camera from playback mode 
to still image mode (or movie or voice 
memo mode), press the Playback button again.
Note
About power-on in playback mode
When the camera power is off, pressing the Playback button for more than one second turns 
on the camera. (The camera starts up in Playback Mode.)
When the camera is turned on with the Playback button, pressing the Playback button again 
switches Playback Mode to Shooting Mode.
Where images are played back from
When no SD memory card is inserted, the camera plays back from the internal memory. 
When an SD memory card is inserted, it plays back from the SD memory card.
Reference
• For how to playback movies, see P.96.
• For how to playback sounds, see P.98.
• For how to playback still images with voice memo, see P.78.
To Previous
To  N e x t
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							43
Quick Guide
Playing back in the three-frame view
A playback view can be divided into three frames. The 
three-frame view allows you to select a still image to 
enlarge or delete it.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the 9 (Thumbnail Display) 
button.
The screen changes to the three-frame 
view. The large frame at the center 
displays the still image now selected.
To switch to single-picture display:
1.Press the #$ buttons to select a still image.
2.Press the 8 (Enlarged View) button or the M/O
button.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							44
About Screen Switching at Playback
The playback screen changes as follows:
Note
If one of the following operations is performed on the three-frame view, the display returns to 
the ordinary playback screen (single-picture display) and the operation is executed.
• Deletion (P.49)
• Menu display (P.99)
• Movie playback (P.96)
• Sound playback (P.98)
Reference
For how to erase unwanted Images, see P.49.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							45
Quick Guide
Thumbnail Display
You can view your images in sets of 12.
You can then select an image to erase or magnify.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the 9 (Thumbnail Display) 
button.
The screen changes to three-frame 
view.
3.Press the 9 (Thumbnail Display) 
button.
The screen is divided into 12 frames and 
displays 12 still images at once.
To display just one photo
1.Use the !#$ buttons to select an image.
2.Press the 8 (Enlarged View) button twice.
Reference
• For how to erase the selected image, see P.50.
• For how to switch to the three-frame view, see P.43.
Selected still image
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							46
Magnifying Images
You can enlarge a still image displayed on the LCD 
Monitor.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the #$ buttons to display the still image you want to 
enlarge.
3.Press the 8 (Enlarged View) 
button.
The still image is enlarged.
Note
Enlarged view is also available in the Quick Review mode.
2592 × 1944, 2592 × 1728, 2048 × 1536 8 times
1280 × 960 6.7 times
640 × 480 3.4 times
In Enlarged View
8 Button Enlarges the displayed still image. You can move around on the displayed 
image by pressing the !#$ buttons.
9 Button Reduces the displayed still image enlarged by pressing the 8 button.
M/O Button Displays the still image at the maximum magnification ratio.
Pressing this again returns the still image to its original size.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							47
Quick Guide
Viewing on a Television
You can view still images you have taken on a TV screen. The 
camera displays everything on the TV screen just as it would on the 
LCD Monitor.
To use your television for viewing, connect your camera to the 
television with the AV cable that came with your camera.
To view still images on a television, follow the steps below.
1.Securely connect the AV cable to 
the Video In terminal on the 
television.
Connect the white plug of the AV cable 
to the audio input terminal (white) of the 
TV unit and the yellow plug to the video 
input terminal (yellow).
2.Make sure the camera power is off.
3.Securely connect the AV cable to 
the Video Out terminal.
4.Set the television to “Video” mode. (Set the input to 
“Video”.)
For details, see the documentation that came with the television.
Audio input terminal (white)
Video input terminal (yellow)
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							48
5.Press the Power button or keep 
pressing the Playback button for 
more than one second to turn the 
camera on.
Caution
Connecting the AV cable to the camera turns off the LCD monitor display and the speaker 
output. 
Note
• If you connect the AV cable to your video recorder’s In terminal, you can record what you 
have shot onto video.
• Your camera is set to NTSC playback format (used in Japan and other countries) for use 
with television equipment, etc. If the equipment you want to connect to uses PAL format 
(used in Europe and elsewhere), then switch your camera to PAL format in the Setup Menu 
before connecting.
Reference
For how to change the video out mode, see P.124.
Downloaded From camera-usermanual.com Ricoh Manuals