Ricoh Caplio R30 User Guide

							129
Changing Camera Settings
To transfer images in Mass Storage Mode, follow the 
steps below:
1.Change [USB CONNECTION] to [MASS STR] on the Setup 
menu.
2.Make sure that the camera power is off.
3.Connect the accessory USB cable to a USB port of your 
computer.
4.Connect the USB cable to the USB 
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file 
necessary for recognizing the camera as a 
drive.
After this preparation, the camera is 
displayed as a drive at My Computer 
(Windows) or Desktop (Macintosh).
5.From the displayed drive, 
copy a file to the desired 
location.
The figure at right shows the folder 
configuration in a drive.
When the contents of the built-in 
memory are displayed, the drive 
name is RICOHDCI.
Caution
• During transfer, do not disconnect the USB cable.
• If a file with the same name already exists at the destination, it is overwritten. If you do not 
want the file to be overwritten, rename the file or transfer images to another folder.
Note
When a SD memory card is inserted, its files are displayed. Otherwise, files in the built-in 
memory are displayed.
Example of the display in 
Windows XP
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							130
Disconnecting the Camera from Your Computer 
(Windows)
This display is an example for Windows XP. The terms are different 
for other OS but the operations are the same.
1.Click the Safely Remove Hardware 
icon at the right end of the task bar.
2.Select [USB Large-capacity Storage 
Device] and click [Stop].
3.Check that [USB Large-capacity Storage Device] is selected 
and click [OK].
4.Click [OK].
5.Unplug the USB cable.
Disconnect the Camera from Your Computer 
(Macintosh)
1.Put the displayed drive in the Recycle Bin.
2.Unplug the USB cable.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							131
Changing Camera Settings
Enlarging Icon Display (ENLGE PHOTO ICON)
Icons on the shooting screen are enlarged.
Under this setting, the following icons are enlarged:
•Flash
• Macro Shooting
•Self Timer
• White Balance
• Focus
• Exposure Compensation
• ISO Sensitivity
If icons are enlarged, the following items are not displayed:
• Zoom Bar/Focus Bar
• Date/Time
• Sharpness
• Color Depth
To enlarge icons on the shooting screen, follow the steps below:
1.Display the setup menu.
For the operating procedure, see P.111.
2.Press the  button to select [ENLGE PHOTO ICON] and 
press the $ button.
3.Press the ! button to select 
[ON].
4.Press the M/O or # button.
5.If the # button was pressed in 
Step 4, press the M/O
button.
Now you have finished the shooting icon 
enlargement setting.
These settings are used until they are changed the next time.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							132
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							Chapter 4
Installing Software
(Downloading Images to 
Your Computer)
Installing the Provided Software (For Windows) ...134
Installing the Provided Software (For 
Macintosh) ...................................................... 153
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							134
Installing the Provided Software (For Windows)
You need to install software for transferring images to your computer 
before you can download images from the camera.
Note
• If a file with the same name already exists at the destination, it is overwritten. If you do not 
want the file to be overwritten, rename the file or transfer images to another folder.
• To download images from the camera to your computer without having to install the 
software, change [USB CONNECTION] to [MASS STR] on the camera (P.127).
Reference
For how to download images from the camera into your computer, see the Software User 
Guide available from the Caplio Software CD-ROM. For how to display the Software User 
Guide, see P.137.
Caution
• Be sure to install the software before you connect the 
camera to your computer. (P.139)
• When [MASS STR] is selected on the Setup menu of 
the camera, you can view the files in the camera 
without installing the supplied application or USB 
driver. At the time of purchase, [ORIGINAL] is 
selected.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							135
Installing Software
Software that can be installed from the Caplio Software 
CD-ROM
Once you insert the Caplio Software 
CD-ROM in the CD-ROM drive, the 
following screen appears 
automatically:
When [Install Software] is clicked: (P.139)
The following software will be installed:
XP: Windows XP 98: Windows 98/98SE/Me/2000
Item NameDescription(Refer to)
Install the Software Use this button to install software required for handling the 
camera and images.P. 1 3 9
Installing DeskTopBinder Lite P.141
Browse User’s Manual 
(Software Version)Use this button to display the Software User Guide (PDF). P.137
Browse CD-ROM Content Use this button to display the list of files contained on the CD-
ROM.P. 1 3 7
SoftwareWindowsDescription
XP98
RICOH Gate LaOODownloads images.
ImageMixerOO
Shot images can be displayed or edited and video CDs can be created.
DirectX (see P.150) is necessary for handling movies.
USB DriverOOUsed to connect the camera to the computer. This driver is 
programmed for this camera. (It is also compatible with the existing 
models.)
WIA DriverO- Used to capture images and connect the camera to the computer. This 
driver is programmed for this camera. (It is also compatible with the 
existing models.)
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							136
Reference
The camera is provided with software ImageMixer that allows you to display and edit images 
from your computer. For how to use ImageMixer, click the [?] button on the ImageMixer 
window and see the displayed manual.
For the latest information about the ImageMixer, access the Web page of Pixela Co., Ltd.
(http://www.imagemixer.com). 
Note
The WinASPI installer starts during installation of ImageMixer.
WinASPI is required when creating a Video CD using ImageMixer.
When [Installing DeskTopBinder Lite] is clicked: (P.141)
The following software will be installed:
XP: Windows XP 98: Windows 98/98SE/Me/2000
Caution
The DeskTopBinder Lite is compatible with Windows 98 SE but not Windows 98.
Reference
• For details about the DeskTopBinder Lite, refer to the Read This First (PDF file), Setup 
Guide (PDF file), Ridoc Auto Document Link Guide (PDF file), and Help supplied with the 
DeskTopBinder Lite.
• For details about the Auto Document link, refer to the Ridoc Auto Document Link Guide 
(PDF file). 
SoftwareWindowsDescription
XP98
DeskTopBinder LiteOOSoftware used to manage business documents.
Images in the camera can be downloaded to Ridoc using the Auto 
Document link that monitors document updating. 
USB DriverOOUsed to connect the camera to the computer. This driver is 
programmed for this camera. (It is also compatible with the existing 
models.)
WIA DriverO- Used to capture images and connect the camera to the computer. This 
driver is programmed for this camera. (It is also compatible with the 
existing models.)
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							137
Installing Software
When [Browse User’s Manual (Software Version)] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-ROM can be 
displayed on your computer screen. If you are a Windows user and have 
Acrobat Reader installed on your computer, simply double-click [View 
Software User Guide].
If not installed, Acrobat Reader should be installed (see P.149).
When [Browse CD-ROM] is clicked:
You can check folders and files on the CD-ROM.
The CD-ROM contains not only the Caplio software but also the following 
software. These software products run on Windows.
For the installation of each software product, see the Reference page in the 
table below. 
Reference
• For details about the Acrobat Reader, see Help for the Acrobat Reader.
• To install ImageMixer alone, double-click Setup.exe in the ImageMixer folder.
SoftwareDescriptionRefer to
Acrobat Reader Required for viewing the Software User Guide.  P.149
DirectX Necessary for playing movies by the ImageMixer. P.150
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							138
System Requirements for Using the 
Provided Software
The following environments are necessary for using the provided software.
Please check your computer, or the computer’s user manual.
Caution
• If your computer has an upgraded OS, the USB function may not work normally, so it 
cannot be supported.
• The provided software may not operate properly if changes are made to the operating 
system, such as with patches and service package releases.
• The camera does not support connection to a USB port added by using an extension 
function (PCI bus or other).
• If used in conjunction with a hub or other USB devices, the software may not work properly.
• When dealing with movies and other large files, a larger memory environment is 
recommended.
Reference
For how to download images to your computer using an SD Memory Card, see the Software 
User Guide.
Operating Systems Supported Windows 98/98 Second Edition
Windows 2000 Professional
Windows Me
Windows XP Home Edition/Professional
CPU Pentium lll: 500MHz or more
Memory Windows 98/98SE: 128MB or more
Windows 2000: 128MB or more
Windows Me: 128MB or more
Windows XP: 256MB or more
Hard drive space required for 
installationWindows 98/98SE: 500MB or more
Windows 2000: 500MB or more
Windows Me: 500MB or more
Windows XP: 500MB or more
Display resolution 800 × 600 pixels or greater
Display colors 65000 colors or greater
CD-ROM drive A CD-ROM drive compatible with the above-mentioned computer body
USB port A USB port compatible with the above-mentioned computer body
Downloaded From camera-usermanual.com Ricoh Manuals