Ricoh Caplio R30 User Guide

							99
A Variety of Shooting Techniques/Playback
Other Functions Available in Playback Mode
Playback Setting Menu
The Playback menu provides the functions shown in the table below:
Note
The SETUP menu can be accessed from within the Playback Setting menu. For details, see 
P. 11 0 .
Using the Playback Menu
1.
Press the 6 (Playback) button to select the Playback 
mode.
2.Press the M/O button.
The Playback menu appears.
3.Press the ! buttons to select 
the desired setting.
4.After selecting a setting item, 
press the $ button.
Each function screen appears.
SettingOptionRefer to
SLIDE SHOW P.100
PROTECT Select/Deselect 1 FILE, Select/Deselect ALL FILES, Select Multi-files P.101
DPOF Select/Deselect 1 FILE, Select/Deselect ALL FILES, Select Multi-files P.104
RESIZE 1280, 640 P.107
COPY TO CARD P.108
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							100
Showing Photos in Order Automatically 
(SLIDE SHOW)
You can show the recorded still images, movies, and sound files 
sequentially on the LCD Monitor. This function is called a slide show.
To view a slide show, follow the steps below.
1.Press the 6 (Playback) button.
The last shot taken is displayed.
2.Press the M/O button.
The Playback menu appears.
3.Make sure that [SLIDE SHOW] is 
selected, and then press the $
button.
The slide show starts and files are played 
back in order.
If you want to stop the slide show in 
progress, press any button on the 
camera.
Until stopped, the slide show will repeat itself.
Note
• Still images are displayed for 3 seconds each.
• For movies, not just one frame, but the entire movie you shot is displayed.
• Sound files are also played back.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							101
A Variety of Shooting Techniques/Playback
Write-protecting Your Images (PROTECT)
You can protect files from being accidentally deleted.
Caution
Protected files cannot be deleted normally. However, they will be deleted completely if you 
format the memory where the files are stored.
Protecting Files
1.Press the 6 (Playback) button.
The last shot taken is displayed.
2.Press the #$ buttons to display the file you want to 
protect.
3.Press the M/O button.
The Playback Setting menu appears.
4.Press the  button to select 
[PROTECT] and press the $
button.
5.Make sure that [1 FILE] is selected, 
and then press the M/O
button.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							102Protection is applied and the Protect 
symbol appears in the upper-left corner of 
the screen.
Protecting All Files
To protect all your files, follow the steps below.
1.Press the 6 (Playback) button.
2.Press the M/O button.
The Playback menu appears.
3.Press the  button to select 
[PROTECT] and press the $
button.
4.Press the ! button to select 
[ALL FILES].
5.Make sure that [SELECT] is 
selected, and then press the 
M/O button.
Protection is applied and the Protect 
symbol appears in the upper-left corner of 
the screen.
To remove protection from all your files, 
select [CANCEL] in step 5.
Note
You can remove protection from all or multiple files at once.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							103
A Variety of Shooting Techniques/Playback
Protecting Multiple Files at Once
To protect selected files all at once, follow the steps below.
1.Press the 6 (Playback) button.
2.Press the 9 (Thumbnail) button twice.
The screen is divided into 12 frames and displays 12 still images at once.
3.Press the !#$ buttons to select the first file of the 
selection.
4.Press the M/O button.
The Playback menu appears.
5.Press the  button to select [PROTECT] and press the $
button.
6.Press the !#$ buttons to select 
the next file of the selection, and 
then press the M/O button.
The Protect symbol appears in the upper-
right corner of the file.
7.Repeat Step 6 to select all the files 
you wish to protect.
If you selected a file by mistake, you can deselect by selecting the file and 
pressing the M/O button again.
8.Press the DISP. button.
The display indicates that the selected images are being processed; once 
finished, the display returns to the Thumbnail Display screen.
Note
To remove protection from multiple files, follow the same steps described above to select 
them and remove protection.
Reference
For details on thumbnail display, see P.45.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							104
Using a Printing Ser vice (DPOF)
The still images recorded on an SD Memory Card can be printed out 
if you take them to a shop that offers a digital camera print service.
To use a print service, it is necessary to make settings required for 
printing. These settings are called DPOF (Dee-Pof) settings.
The DPOF setting specifies one print per still image.
However, if multiple images are selected for batch setting, you can 
specify the number of copies to print.
Setting DPOF for the Still Image Displayed
1.Press the 6 (Playback) button.
2.Display the still image you want to specify.
3.Press the M/O button.
The Playback Setting menu appears.
4.Press the  button to select 
[DPOF] and press the $ button.
5.Make sure that [1 FILE] is selected, 
and then press the M/O
button.
Once the DPOF setting is made, the 
DPOF symbol appears in the upper-left 
portion of the screen.
Note
Removing the DPOF setting for one photo at a time is done in the same way as setting it.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							105
A Variety of Shooting Techniques/Playback
Setting DPOF for All Still Images
To apply DPOF settings to all your still images, follow the steps 
below.
1.Press the 6 (Playback) button.
2.Press the M/O button.
The Playback menu appears.
3.Press the  button to select 
[DPOF] and press the $ button.
4.Press the ! buttons to select 
[ALL FILES].
5.Make sure that [SELECT] is 
selected, and then press the  
M/O button.
Once the DPOF setting is made, the 
DPOF symbol appears in the upper-left 
portion of the screen.
Note
• To remove the DPOF setting from all your still images, select [CANCEL] in step 5.
• You can remove all or multiple still image DPOF settings at once.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							106
Setting DPOF for Multiple Still Images
To make the DPOF setting for selected still images all at once, follow 
the steps below.
1.Press the 6 (Playback) button.
2.Press the 9 (Thumbnail) button twice.
The screen is partitioned into twelve segments to display the thumbnails 
of files.
3.Press the !#$ buttons to select the first still image for 
which you wish to make the DPOF setting.
4.Press the M/O button.
The Playback menu appears.
5.Press the  button to select 
[DPOF] and press the $ button.
6.Press the ! buttons to set the 
number of copies to print.
Press the ! button to increase the number, or the  button to decrease 
it.
7.Press the #$ buttons to select the next still image for 
which you wish to make the DPOF setting.
8.Press the ! buttons to set the number of copies to print.
Press the ! button to increase the number, or the  button to decrease 
it.
9.Repeat Steps 7 and 8 to select all the still images for which 
you wish to make the DPOF setting.
10.Press the M/O button.
The display indicates that the selected images are being processed; once 
finished, the display returns to the Thumbnail Display screen.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							107
A Variety of Shooting Techniques/Playback
Changing the Image Size (RESIZE)
You can reduce the image size of a shot still image to additionally 
create a file of a different image size.
Caution
You can resize only still images and still images with voice memos. Movies cannot be resized.
Note
• The following types of resizing are possible:
• The ratio of width to height of the [3:2] image is 3:2. When this image is resized, it is 
reduced to the [4:3] image with black borders at the top and bottom. 
To change the image size, follow the steps below.
1.Press the 6 (Playback) button.
2.Press the M/O button.
The Playback Setting menu appears.
3.Press the  button to select 
[RESIZE] and press the $ button.
4.Press the ! buttons to select 
[1280] or [640].
5.Press the M/O button.
The image size is changed and the resized 
still image is displayed.
Reference
For how to change the image size at shooting, see P.62.
OriginalResized
F2592/N2592/3:2/F2048/N2048 N1280 N640
F1280/N1280 N640
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							108
Copying the Contents of Internal Memor y to 
a Memor y Card (COPY TO CARD)
You can copy all movies, still images, and sound data stored in 
internal memory onto an SD Memory Card at once.
1.Turn the Camera Off.
2.Insert an SD Memory Card.
3.Turn the camera on.
4.Press the 6 (Playback) button.
5.Press the M/O button.
The Playback Setting menu appears.
6.Press the  button to select 
[COPY TO CARD] and press the $
button.
The display indicates copying is in 
progress; once finished, the display 
returns to the playback screen.
Note
• If the capacity of the SD Memory Card you are copying to is insufficient, a message will be 
displayed indicating there is not enough capacity. To copy only the number of shots that will 
fit into the available capacity, select [YES] and then press the M/O button. To 
cancel copying, select [NO] and then press the M/O button.
• It is not possible to copy from SD Memory Card to internal memory.
Downloaded From camera-usermanual.com Ricoh Manuals