Ricoh Aficio MP2500LN User Manual
Here you can view all the pages of manual Ricoh Aficio MP2500LN User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Network Settings
33
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
IEEE 1394 interface cable.
For details about how to specify the...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-40.png "Page 41
Network Settings
33
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
IEEE 1394 interface cable.
For details about how to specify the...")
Network Settings 33 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.58 “Interface Settings” IEEE 1394 (IPv4 over 1394) This section lists the settings required for using Document Server function with IEEE 1394 interface cable. For details about how to specify the...
Page 42
![Page 42
Connecting the Machine
34
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-41.png "Page 42
Connecting the Machine
34
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected...")
Connecting the Machine 34 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Document Server function with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected...
Page 43
Network Settings 35 1 Using Utilities to Make Network Settings You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see “Using Web Image Moni- tor”, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see “Using SmartDe- viceMonitor for Admin”, Network Guide. ❒For Details about using telnet, see “Remote Maintenance”, Network Guide. Reference “Using Web Image Monitor”,...
Page 44
![Page 44
Connecting the Machine
36
1
❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Address Autoconfiguration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-43.png "Page 44
Connecting the Machine
36
1
❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Address Autoconfiguration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the...")
Connecting the Machine 36 1 ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Address Autoconfiguration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the...
Page 45
![Page 45
Network Settings
37
1
❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
Web Image Monirot:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting....](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-44.png "Page 45
Network Settings
37
1
❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
Web Image Monirot:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting....")
Network Settings 37 1 ❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server] Web Image Monirot:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting....
Page 46
![Page 46
Connecting the Machine
38
1
❖[Network] → [NW Frame Type] → [Auto Select]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-45.png "Page 46
Connecting the Machine
38
1
❖[Network] → [NW Frame Type] → [Auto Select]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame...")
Connecting the Machine 38 1 ❖[Network] → [NW Frame Type] → [Auto Select] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet II] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame...
Page 47
![Page 47
Network Settings
39
1
❖[Network] → [LAN Type] → [Ethernet]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [LAN Type] → [IEEE 802.11b]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [Host Name]
Web Image...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-46.png "Page 47
Network Settings
39
1
❖[Network] → [LAN Type] → [Ethernet]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [LAN Type] → [IEEE 802.11b]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [Host Name]
Web Image...")
Network Settings 39 1 ❖[Network] → [LAN Type] → [Ethernet] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [LAN Type] → [IEEE 802.11b] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Host Name] Web Image...
Page 48
![Page 48
Connecting the Machine
40
1
❖[IEEE 1394] → [IPv4 over 1394]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394] →...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-47.png "Page 48
Connecting the Machine
40
1
❖[IEEE 1394] → [IPv4 over 1394]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394] →...")
Connecting the Machine 40 1 ❖[IEEE 1394] → [IPv4 over 1394] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] →...
Page 49
![Page 49
Network Settings
41
1
❖[IEEE 802.11b] → [Channel]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 802.11b] → [Security Method]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 802.11b] → [Transmission Speed]
Web Image...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-48.png "Page 49
Network Settings
41
1
❖[IEEE 802.11b] → [Channel]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 802.11b] → [Security Method]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 802.11b] → [Transmission Speed]
Web Image...")
Network Settings 41 1 ❖[IEEE 802.11b] → [Channel] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [Security Method] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [Transmission Speed] Web Image...
Page 50
![Page 50
Connecting the Machine
42
1
❖[File Transfer] → [Administrators E-mail Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer] → [E-mail Communication Port]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-49.png "Page 50
Connecting the Machine
42
1
❖[File Transfer] → [Administrators E-mail Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer] → [E-mail Communication Port]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File...")
Connecting the Machine 42 1 ❖[File Transfer] → [Administrators E-mail Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [E-mail Communication Port] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File...