Ricoh Aficio MP2500LN User Manual
Here you can view all the pages of manual Ricoh Aficio MP2500LN User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
Network Settings 23 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending e-mail with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required...
Page 32
![Page 32
Connecting the Machine
24
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-31.png "Page 32
Connecting the Machine
24
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...")
Connecting the Machine 24 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication...
Page 33
![Page 33
Network Settings
25
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-32.png "Page 33
Network Settings
25
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the...")
Network Settings 25 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. Reference p.58 “Interface Settings” p.68 “File Transfer” IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending file with IEEE 1394 interface cable. For details about how to specify the...
Page 34
![Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-33.png "Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...")
Connecting the Machine 26 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wire- less LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected...
Page 35
![Page 35
Network Settings
27
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-34.png "Page 35
Network Settings
27
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...")
Network Settings 27 1 Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with ether- net cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is...
Page 36
![Page 36
Connecting the Machine
28
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with IEEE
1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.58...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-35.png "Page 36
Connecting the Machine
28
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with IEEE
1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.58...")
Connecting the Machine 28 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for delivering data to network with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Reference p.58...
Page 37
![Page 37
Network Settings
29
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-36.png "Page 37
Network Settings
29
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...")
Network Settings 29 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the...
Page 38
![Page 38
Connecting the Machine
30
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-37.png "Page 38
Connecting the Machine
30
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...")
Connecting the Machine 30 1 Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see “Interface Settings”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is...
Page 39
![Page 39
Network Settings
31
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
IEEE 1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings...](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-38.png "Page 39
Network Settings
31
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
IEEE 1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings...")
Network Settings 31 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for using network TWAIN Scanner with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. Reference p.58 “Interface Settings” IEEE 802.11b (wireless LAN) This section lists the settings...
Page 40
![Page 40
Connecting the Machine
32
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.58 “Interface Settings”
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment....](http://img.usermanuals.tech/thumb/64/37675/w300_Ricoh_Aficio_MP2500LN-39.png "Page 40
Connecting the Machine
32
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.58 “Interface Settings”
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment....")
Connecting the Machine 32 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.58 “Interface Settings” Settings Required to Use Document Server This section lists the settings required for using Document Server function under the network environment....