Ricoh Aficio MP1600L User Manual

Program Special Sender
113
4
Printing Special Sender List
You can display programmed Special Senders.
ASelect [Fax Features] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools] using {U} or {T}, and then press the {OK} key.
CSelect [Program Special Sender] using {U} or {T}, and then press the {OK}
key.
DSelect [Print Special Sender List] using {U} or {T}, and then press the {OK}
key.
EPress the {Start} key.
The screen returns to step 
C after completion of printing.
To cancel...

Fax Features
114
4
Downloaded From ManualsPrinter.com Manuals 

115
5. Printer Features
This chapter describes user tools in the Printer Features menu. For details on
how to access Printer Features, see Accessing User Tools.
List/Test Print
This section describes the user tools in the Test Print menu under Printer Fea-
tures.
These items are related to test print, including printing the Config. Page.
If changes are made to the machines environment or its print-related settings,
or a new program is registered, we recommend you print the list of settings, so
they can...

Printer Features
116
5
Note
❒The layout of the list produced by the test print is fixed to A4 (letter size). We
recommend you load A4 or letter size paper (plain or recycled) in one of the
paper trays.
❒The tray that contains A4 (letter) size paper is automatically selected. If A4
(letter) size paper is not loaded in any of the paper trays, Paper Tray Priority
is selected. If the paper size loaded in the Paper Tray Priority is smaller than
A4 (letter) size, the edges may be lost. If the paper size placed...

Maintenance
117
5 Maintenance
This section describes the user tools in the Maintenance menu under Printer Fea-
tures.
Default settings are shown in bold type.
❖List/Test Print Lock
You can Lock the [List/Test Print] menu.
The default setting is Off.
Reference
p.4 “Accessing User Tools”
p.37 “System Settings”
Downloaded From ManualsPrinter.com Manuals 

Printer Features
118
5System
This section describes the user tools in the System menu under Printer Features.
Default settings are shown in bold type.
❖Print Error Report
Select this to have an error report printed when a printer or memory error oc-
curs.
The default setting is Off.
❖Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues
after a system error occurs.
The default setting is Off.
❖Memory Overflow
Select this to have a memory overflow error report...

System
119
5
❖Toner Saving
You can save toner.
The default setting is Off.
❖Printer Language
Specify the printer language.
The default setting is Auto.
❖Sub Paper Size
You can enable the Auto Substitute Paper Size (A4 and LT) feature.
The default setting is Off.
❖Page Size
You can select the default paper size.
 The paper size you can select:
A3, A4, A5, B4JIS, B5JIS, C5 Env, C6 Env, DL Env, 11 × 17, 8
1/2 × 14, 81/2 × 13,
81/2 × 11, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 41/8 × 91/2, 31/8 ×...

Printer Features
120
5
❖RAM Disk
You can specify how much data the RAM disk can hold. If you do not want
to use the RAM disk, select [0 MB]. This setting does not appear if the function
upgrade option is installed.
The default setting is 4 MB.
Note
❒Setting of [Bypass Tray Priority] is for bypass tray only.
Reference
p.4 “Accessing User Tools”
Loading Paper, Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Host Interface
121
5 Host Interface
This section describes the user tools in the Host Interface menu under Printer
Features.
Default settings are shown in bold type.
❖I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change
this setting.
The default setting is 128 KB.
❖I/O Timeout
You can set how many seconds the machine should wait before ending a print
job. If data from another port usually arrives in the middle of a print job, you
should increase this timeout period....

Printer Features
122
5PCL Menu
This section describes the user tools in the PCL Menu under Printer Features.
Default settings are shown in bold type.
❖Orientation
You can set the page orientation.
The default setting is Portrait.
❖Form Lines
You can set the number of lines per page.
The default setting is 64 (Metric version) / 60 (Inch version).
 5 to 128 by 1
❖Font Source
You can set the storage location of the default font.
The default setting is Resident.
RAM, SD and SD Font Download can be selected...