Ricoh Aficio MP 9000 User Manual

Registering SMTP and LDAP Authentication
233
7
LDAP Authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see
“LDAP Server Settings, Network Guide.
Important
❒When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program/Change LDAP Server of
Administrator Tools settings...

Registering Addresses and Users for Scanner Functions
234
7
HPress [Change] under Login User Name.
IEnter the login user name, and then press [OK].
JPress [Change] under Login Password.
KEnter the password, and then press [OK].
LEnter the password again to confirm, and then press [OK].
MPress [OK].
Note
❒To register the name, see Registering Names”.
❒When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program/Change LDAP Server
of Administrator...

235
8. Other User Tools
Initial settings allow you switch the language as well as checking the number of
printed papers by displaying the counter.
Changing the Display Language
You can change the language used on the display. English is set as default.
APress the {Language Selection} key.
Note
❒If you want to return the display language to “English”, repeat the step
above.
APD015S
Downloaded From ManualsPrinter.com Manuals 

Other User Tools
236
8Inquiry
The Inquiry function lets you check the telephone numbers to contact for repairs,
or ordering consumables such as toner. Be sure to contact your service engineer
to verify the following:
❖Consumables
 Telephone No. to order
Toner
Staple
 Staple (Center)
❖Machine Maintenance/Repair
 Telephone No.
 Serial No. of Machine
❖Sales Representative
 Telephone No.
APress [Inquiry].
Inquiry information appears.
BPress [Print Inquiry List].
Downloaded From ManualsPrinter.com...

Inquiry
237
8
CPress the {Start} key.
The inquiry information list is printed out.
DPress [Exit] twice.
Downloaded From ManualsPrinter.com Manuals 

Other User Tools
238
8Counter
Displaying the Total Counter
You can display the total counter value used for all functions.
You can also print out a counter data list.
APress {Counter} key.
BTo print a counter list, press [Print Counter List].
CPress the {Start} key.
A counter list prints out.
DPress [Exit] twice.
APD016S
Downloaded From ManualsPrinter.com Manuals 

Counter
239
8
Method of Counting
The counter increments “1” for each original sheets. In duplex mode, it counts
“2” for front and back of original sheet.
❖The counter increments at the functions below:
Copying
Printing
Scanning
 Test Print (Multiple Lists, Configuration Page, Error Log, Menu List, PCL
Configuration/Font Page, PS Configuration/Font Page, PDF Configura-
tion/Font Page, Hex Dump)
 Printing Destination List of Address Book
❖The counter does not count at the functions below:
Printing...

Other User Tools
240
8
Downloaded From ManualsPrinter.com Manuals 

241
9. Appendix
Adjustment Settings for Operators
Changing the Adjustment Settings for Operators
APress the {User Tools} key.
BPress [Adjustment Settings for Operators].
CSelect the item that you want to change the value.
DSpecify the setting value.
To select the setting value, press the value on the display.
To input the value, use the number keys.
EPress {enter}.
FPress [Exit] twice.
APD014S
Downloaded From ManualsPrinter.com Manuals 

Appendix
242
9
Setting Values
Feed
❖Shift Image With Feed
❖1-710-001 : Front Side
 Max.: 2 mm
 Min.: -2 mm
Step: 0.1 mm
Initial value: 0
❖1-710-002 : Back Side
 Max.: 2 mm
 Min.: -2 mm
Step: 0.1 mm
Initial value: 0
❖1-710-003 : Front Side (Low Speed Mode)
 Max.: 2 mm
 Min.: -2 mm
Step: 0.1 mm
Initial value: 0
❖1-710-004 : Back Side (Low Speed Mode)
 Max.: 2 mm
 Min.: -2 mm
Step: 0.1 mm
Initial value: 0
❖Shift Image Across Feed
❖1-720-001 : Tray 1
Max: 2 mm
Min:-2 mm
Step: 0.1 mm...