Philips 200wp7e User Manual
Have a look at the manual Philips 200wp7e User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
SmartManage
SmartManage is a software dedicated to business environments. Personal u\
sers
normally do not need to use SmartManage.
Philips SmartControl
The SmartControl and SmartManage Agent are deployed and installed in com\
puters using Philips
monitors. With SmartControl and SmartManage Agent, monitors and PCs can \
interact with the
administrators inquiries. Because SmartControl operates on individual P\
C, end users can also use
SmartControl to adjust monitors performance settings.
1....](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-45.png "Page 46
SmartManage
SmartManage is a software dedicated to business environments. Personal u\
sers
normally do not need to use SmartManage.
Philips SmartControl
The SmartControl and SmartManage Agent are deployed and installed in com\
puters using Philips
monitors. With SmartControl and SmartManage Agent, monitors and PCs can \
interact with the
administrators inquiries. Because SmartControl operates on individual P\
C, end users can also use
SmartControl to adjust monitors performance settings.
1....")
![Page 47
SmartManage
l Position
Users can adjust the horizontal and vertical position of the screen by m\
oving the sliding bar
left and right. This function is disabled when using DVI-D (digit) inp\
ut.
l Product Information
Click Product Information in the left pane to view the product informati\
on stored in the
monitors memory.
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/smart.htm (3 o\
f 6)2006-08-04 11:01:40 AM](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-46.png "Page 47
SmartManage
l Position
Users can adjust the horizontal and vertical position of the screen by m\
oving the sliding bar
left and right. This function is disabled when using DVI-D (digit) inp\
ut.
l Product Information
Click Product Information in the left pane to view the product informati\
on stored in the
monitors memory.
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/smart.htm (3 o\
f 6)2006-08-04 11:01:40 AM")
![Page 48
SmartManage
l General
Click on General for general information including driver information, d\
evice information, and
monitor control.
Within monitor control, users can click on Auto Setup to achieve optimum\
performance or click on
factory reset to reset the parameters of the monitor. Such choices are d\
isabled when using DVI-D
(digit) input.
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to manage...](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-47.png "Page 48
SmartManage
l General
Click on General for general information including driver information, d\
evice information, and
monitor control.
Within monitor control, users can click on Auto Setup to achieve optimum\
performance or click on
factory reset to reset the parameters of the monitor. Such choices are d\
isabled when using DVI-D
(digit) input.
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to manage...")
![Page 49
SmartManage
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and
settings by a software interface, instead of the hardware buttons at the\
front bezel of the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what
do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove and re-
install SmartControl to ensure proper driver is installed.
Q3. The SmartControl...](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-48.png "Page 49
SmartManage
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and
settings by a software interface, instead of the hardware buttons at the\
front bezel of the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what
do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove and re-
install SmartControl to ensure proper driver is installed.
Q3. The SmartControl...")
![Page 50
SmartManage
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/smart.htm (6 o\
f 6)2006-08-04 11:01:40 AM](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-49.png "Page 50
SmartManage
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/smart.htm (6 o\
f 6)2006-08-04 11:01:40 AM")
![Page 51
Installing Your LCD Monitor
• Front View Produt Description
• Setting Up and Connecting
Your Monitor
•
The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD
4
To adjust brightness of the display
5
To adjust the OSD
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (1\
of 3)2006-08-04 11:01:41 AM](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-50.png "Page 51
Installing Your LCD Monitor
• Front View Produt Description
• Setting Up and Connecting
Your Monitor
•
The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD
4
To adjust brightness of the display
5
To adjust the OSD
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (1\
of 3)2006-08-04 11:01:41 AM")
![Page 52
Installing Your LCD Monitor
6AUTO Automatically adjust the horizontal position, vertical
position, phase and clock setting
RETURN TO TOP OF THE PAGE
Rear View
1 AC power input
2 DVI-D input
3 D-sub
4 Kensington anti-thief lock
5 USB upstream and downstream
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (2\
of 3)2006-08-04 11:01:41 AM](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-51.png "Page 52
Installing Your LCD Monitor
6AUTO Automatically adjust the horizontal position, vertical
position, phase and clock setting
RETURN TO TOP OF THE PAGE
Rear View
1 AC power input
2 DVI-D input
3 D-sub
4 Kensington anti-thief lock
5 USB upstream and downstream
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (2\
of 3)2006-08-04 11:01:41 AM")
![Page 53
Installing Your LCD Monitor
Optimizing Performance
l For best performance, ensure that your display settings are set at 1680 \
x 1050 @60Hz
Note: You can check the current display settings by pressing the OK button \
once. Go into the Product Information. The current display mode is shown\
on
the item called RESOLUTION.
l You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the
best performance out of your monitor. This is included on this CD. Step-\...](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-52.png "Page 53
Installing Your LCD Monitor
Optimizing Performance
l For best performance, ensure that your display settings are set at 1680 \
x 1050 @60Hz
Note: You can check the current display settings by pressing the OK button \
once. Go into the Product Information. The current display mode is shown\
on
the item called RESOLUTION.
l You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the
best performance out of your monitor. This is included on this CD. Step-\...")
![Page 55
Setting up and Connecting Your Monitor
Connect the cables to the back of your computer by following these steps\
:(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c) Plug the power cord on your computer and your monitor into a nearby outl\
et.
(d) USB plug
(1) Connect USB upstream port on monitor and the USB port on PC with a USB c\
able.
(2) The USB downstream port is now ready for any USB device to plug...](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-54.png "Page 55
Setting up and Connecting Your Monitor
Connect the cables to the back of your computer by following these steps\
:(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c) Plug the power cord on your computer and your monitor into a nearby outl\
et.
(d) USB plug
(1) Connect USB upstream port on monitor and the USB port on PC with a USB c\
able.
(2) The USB downstream port is now ready for any USB device to plug...")
![Page 56
The Base
Your LCD Monitor :
• Front View Product
Description
• Accessory Pack
• Setting up and connecting
your monitor
• Getting Started
• Optimizing Performance
The Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the
screen.
Do not release the pin
before the base stand is
firmly fixed to the base
column.
2) Hold the monitor base with both hands and firmly fix the base plate int\
o four-pronged...](http://img.usermanuals.tech/thumb/59/52339/w64_philips_200wp7e-user-manual-55.png "Page 56
The Base
Your LCD Monitor :
• Front View Product
Description
• Accessory Pack
• Setting up and connecting
your monitor
• Getting Started
• Optimizing Performance
The Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the
screen.
Do not release the pin
before the base stand is
firmly fixed to the base
column.
2) Hold the monitor base with both hands and firmly fix the base plate int\
o four-pronged...")
Installing Your LCD Monitor
• Front View Produt Description
• Setting Up and Connecting
Your Monitor
•
The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD
4
To adjust brightness of the display
5
To adjust the OSD
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (1\
of 3)2006-08-04 11:01:41 AM
Installing Your LCD Monitor
6AUTO Automatically adjust the horizontal position, vertical
position, phase and clock setting
RETURN TO TOP OF THE PAGE
Rear View
1 AC power input
2 DVI-D input
3 D-sub
4 Kensington anti-thief lock
5 USB upstream and downstream
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (2\
of 3)2006-08-04 11:01:41 AM
Installing Your LCD Monitor
Optimizing Performance
l For best performance, ensure that your display settings are set at 1680 \
x 1050 @60Hz
Note: You can check the current display settings by pressing the OK button \
once. Go into the Product Information. The current display mode is shown\
on
the item called RESOLUTION.
l You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the
best performance out of your monitor. This is included on this CD. Step-\
by-step instructions
are provided to guide you through the installtion process. Click on the \
link to know more
about this program.
More about FP_setup4.3.exe
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (3\
of 3)2006-08-04 11:01:41 AM
Setting up and Connecting Your Monitor
Your LCD Monitor :
• Front View Product
Description
• Accessory Pack
• Setting Up and Connecting
Your Monitor
• Getting Started
• Optimizing Performance
• The Base
Setting Up and Connecting Your Monitor
Accessory Pack
Unpack all the parts.
Power cord VGA cable DVI cable
USB cable EDFU pack
RETURN TO TOP OF THE PAGE
Connect to PC
Connect the power cord and DVI cable to the back of the monitor firmly. \
(Philips has pre-connected VGA cable for the
first installation.)
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/connect.htm (1\
of 2)2006-08-04 11:01:53 AM
Setting up and Connecting Your Monitor
Connect the cables to the back of your computer by following these steps\
:(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c) Plug the power cord on your computer and your monitor into a nearby outl\
et.
(d) USB plug
(1) Connect USB upstream port on monitor and the USB port on PC with a USB c\
able.
(2) The USB downstream port is now ready for any USB device to plug in
(e) Turn on your computer and monitor. If the monitor displays an image, ins\
tallation is complete.
Note: The USB plug is a pass through connection whether it can support USB 1.\
1 or USB 2.0 depends on your PCs
specification.
RETURN TO TOP OF THE PAGE
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/connect.htm (2\
of 2)2006-08-04 11:01:53 AM
The Base
Your LCD Monitor :
• Front View Product
Description
• Accessory Pack
• Setting up and connecting
your monitor
• Getting Started
• Optimizing Performance
The Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the
screen.
Do not release the pin
before the base stand is
firmly fixed to the base
column.
2) Hold the monitor base with both hands and firmly fix the base plate int\
o four-pronged base attachments.
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (1 of\
5)2006-08-04 11:01:54 AM
The Base
3)Fastening base stand with the monitor.
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (2 of\
5)2006-08-04 11:01:54 AM
The Base VESA Standard Mounting 1) Place monitor face down on a smooth surface. 2) Unscrew the 4 screws at the base. file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (3 of\ 5)2006-08-04 11:01:54 AM
The Base 3) VESA mounting holes 4) Install the wall mount RETURN TO TOP OF THE PAGE file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (4 of\ 5)2006-08-04 11:01:54 AM
The Base
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (5 of\
5)2006-08-04 11:01:54 AM