Philips 200wp7e User Manual

							
Glossary
 
U 
USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and 
bus bandwidth) required by peripherals. USB makes necessary resources a\
vailable without user 
intervention.
l     USB eliminates case anxiety -- the fear of removing the computer case \
to install add-on 
peripherals. USB also eliminates adjustment of complicated IRQ settings \
when installing 
new peripherals. 
l     USB does away with port gridlock. Without USB, PCs are normally limite\
d to one printer, 
two Com port devices (usually a mouse and modem), one Enhanced Paralle\
l Port add-on 
(scanner or video camera, for example) and a joystick. More and more p\
eripherals for 
multimedia computers arrive on the market every day. With USB, up to 127\
 devices can run 
simultaneously on a computer. 
l     USB permits hot plug-in. Theres no need to shut down, plug in, reboot\
 and run set-up to 
install peripherals. And no need to go through the reverse process to un\
plug a device. 
In short, USB transforms todays Plug-and-Pray into true Plug-and-Play\
! 
Hub 
A Universal Serial Bus device that provides additional connections to th\
e Universal Serial Bus. 
Hubs are a key element in the plug-and-play architecture of USB. The Fig\
ure shows a typical hub. 
Hubs serve to simplify USB connectivity from the users perspective prov\
iding low cost and 
complexity.
Hubs are wiring concentrators and enable the multiple attachment charact\
eristics of USB. 
Attachment points are referred to as ports. Each hub converts a single a\
ttachment point into 
multiple attachment points. The architecture supports concatenation of m\
ultiple hubs. 
The upstream port of a hub connects the hub towards the host. Each of th\
e other downstream ports 
of a hub allows connection to another hub or function. Hubs can detect, \
attach and detach at each 
downstream port and enable the distribution of power to downstream devic\
es. Each downstream 
port can be individually enabled and configured at either full or low sp\
eed. The hub isolates low 
speed ports from full speed signaling. 
A hub consists of two portions: the Hub Controller and Hub Repeater. The\
 repeater is a protocol-
controlled switch between the upstream port and downstream ports. It als\
o has hardware support 
for reset and suspend/resume signaling. The controller provides the inte\
rface registers to allow 
communication to/from the host. Hub specific status and control commands\
 permit the host to 
configure a hub and to monitor and control its ports. 
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/GLOSSARY/glossary.htm (\
7 of 9)2006-08-04 11:03:25 AM 
						

							
Glossary
Device 
A logical or physical entity that performs a function. The actual entity\
 described depends on the 
context of the reference. At the lowest level, device may refer to a sin\
gle hardware component, as 
in a memory device. At a higher level, it may refer to a collection of h\
ardware components that 
perform a particular function, such as a Universal Serial Bus interface \
device. At an even higher 
level, device may refer to the function performed by an entity attached \
to the Universal Serial Bus; 
for example, a data/FAX modem device. Devices may be physical, electrica\
l, addressable, and 
logical.
 
 
 
 
Downstream 
The direction of data flow from the host or away from the host. A downst\
ream port is the port on a 
hub electrically farthest from the host that generates downstream data t\
raffic from the hub. 
Downstream ports receive upstream data traffic. 
Upstream 
The direction of data flow towards the host. An upstream port is the por\
t on a device electrically 
closest to the host that generates upstream data traffic from the hub. U\
pstream ports receive 
downstream data traffic.
 
RETURN TO TOP OF THE PAGE 
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/GLOSSARY/glossary.htm (\
8 of 9)2006-08-04 11:03:25 AM 
						

							
Glossary
 
V 
Vertical refresh rate 
Expressed in Hz, it is the number of frames (complete pictures) writte\
n to the screen every second.
 
RETURN TO TOP OF THE PAGE 
 
 
         
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/GLOSSARY/glossary.htm (\
9 of 9)2006-08-04 11:03:25 AM 
						

							
Download and Print
   
        
 
 • Installing your LCD monitor 
driver
 •Download and Printing 
Instructions
 • Installing FPadjust Program
Download and Print
Installing Your LCD monitor driver
System requirements: 
l     PC running Windows 95, Windows® 98, Windows® 2000 , Windows® Me\
, Windows® XP or 
later
l     Find your driver .inf/.icm/.cat at : /PC/drivers/
Read the Readme.txt file before installing. 
This page provides an option to read the manual in .pdf format. PDF file\
s can be downloaded into 
your hard disk, then viewed and printed with Acrobat Reader or through y\
our browser. 
If you do not have Adobe® Acrobat Reader installed, click on the link\
 to install the application. 
Adobe® Acrobat Reader for PC / Adobe® Acrobat Reader for Mac.
 
Download instructions:
To download the file:
1. Click-and-hold your mouse over the icon below. (Windows® 95/98/20\
00/Me/XP users right-click)
Download200WP7.pdf
2. From the menu that appears, choose Save Link As..., Save Target As\
... or Download Link to 
Disk.
3. Choose where you would like to save the file; click Save (if promp\
ted to save as either text or 
source, choose source).
 
Printing instructions:
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/DOWNLOAD/download.htm (1 of 3\
)2006-08-04 11:03:32 AM 
						

							
Download and Print
 To print the manual:
1. With the manual file open, follow your printers instructions and pri\
nt the pages you need.
 
RETURN TO TOP OF THE PAGE
Installing FPadjust Program 
The FP Adjust program generates alignment patterns which will help you a\
djust monitor settings 
such as CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and \
CLOCK.
 
System requirements: 
l     PC running Windows® 95, Windows® 98, Windows® 2000, Windows®\
 Me, Windows® XP or 
later
 
To install FPadjust Program:
l     Click on the link or icon to install FPadjustment Program.  
or 
l     Click-and-hold your mouse over the icon. (Win95/98/2000/Me/XP users rig\
ht-click) 
Download
FP_setup4.3.exe 
l     From the menu that appears, choose Save Link As..., Save Target As...\
 or Download Link 
to Disk.
 
l     Choose where you would like to save the file; click Save (if prompted\
 to save as either text 
or source, choose source).
l     Exit your browser and install the FPadjust Program.
 
Read the FP_Readme4.3.txt file before installing.
 
    
 
   
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/DOWNLOAD/download.htm (2 of 3\
)2006-08-04 11:03:32 AM 
						

							
Download and Print
RETURN TO TOP OF THE PAGE
 
        
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/DOWNLOAD/download.htm (3 of 3\
)2006-08-04 11:03:32 AM