Home > Panasonic > Camera > Panasonic Wv Nw484s Operating Instructions Manual

Panasonic Wv Nw484s Operating Instructions Manual

Here you can view all the pages of manual Panasonic Wv Nw484s Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 41

41
..............................................................................................................................Note
 When the HTTP port number has been changed from 80, enter http://IP address of 
the camera:port number.
 When the DDNS function has been set to ON, enter http://host name registered to 
DDNS server.nmdns.net/.
 When this camera is to be used in a local area network, configure the web browser to 
bypass the proxy server for the local address....

Page 42

Monitor Images on a PC (continued)
42
 Multi-screen window
1Click the [Multi-screen] button. 
Images from the camera are displayed in 
four screens. 
Click a camera title. Live images from 
the camera corresponding to the 
clicked camera title will be displayed 
on the Live page of the newly opened 
window. 
1
To display images on a single 
screen, click the [Live] button.  

Page 43

43
Action at an alarm occurrence 
When a Terminal alarm, VMD alarm, Scene change detection alarm or Command 
alarm occurs, alarm action is performed according to the setup for that alarm. For further 
information about how to set alarms, refer to the Setup Manual.
Alarm type
Action at an alarm occurrence
 Display of the [Alarm occurrence indication] button on the Live page (→Setup 
Manual) Terminal alarm : Alarm action will be performed when the alarm device connected 
to the cable is activated.
VMD...

Page 44

Action at an alarm occurrence (continued)
44
Important
 When Polling(30 sec) is selected for Alarm status update mode, the alarm 
occurrence indication button will be refreshed in 30-second intervals. For this reason, it 
may take a maximum of 30 seconds until the alarm occurrence indication button is 
displayed on the Live page when an alarm occurs. (→Setup Manual) 

Page 45

45
Viewing Help 
If you want to know anything about operation or setup methods on screen, display the 
Help screen.
Displaying the Help screen
 Setup screen 
 Help screen
1Click the [Setup] button. 
The setup screen is displayed.
2Click the [Help] button. 
The Help screen is displayed.
1
2
Click the desired item to display a 
detailed explanation for the 
corresponding operation.  

Page 46

46
Troubleshooting 
Before requesting service, check the following items.
Also, check the description in the Operating Instructions, Setup Manual.
Contact your dealer if a problem cannot be solved even after checking and trying the 
solution or if a problem is not described below.
SymptomsCheck item/remedypage
Camera does not 
turn on.▲
AC/DC power supply 
 Is the power firmly connected to the power 
outlet? 
Make sure that it is connected.—
PoE power supply 
 Is the network cable connected to a PoE-...

Page 47

47
Specifications 
 General
 Camera Power supply 24 V AC, 60 Hz, 12 V DC, PoE (IEEE802.3af-compliant)
Power consumption 24 V AC: approx. 8.2 W, 
12 V DC: approx. 850 mA, 
PoE: approx. 9.2 W (Class 0)
(When heater unit is used)
24 V AC: approx. 16 W, 
12 V DC: approx. 920 mA, 
PoE: approx. 12 W (Class 0)
Ambient operating tempera-
ture-10ºC to +50ºC {14ºF to 122ºF}
(When heater unit is used)
-30ºC to +50ºC {-22ºF to 122ºF} (AC 24 V or PoE)
Ambient operating humidity Less than 90% (non-condensation)...

Page 48

Specifications (continued)
48
Lens
Network Shutter speed OFF (1/60), AUTO, 1/100
Electronic sensitivity 
enhancementMax. 32X
White balance ATW1/ATW2/AWC
Digital noise reduction LOW/HIGH
Electronic zoom Max. 3X
Camera title Max. 16 character display (alphanumeric characters, 
marks) ON/OFF
VMD alarm 4 areas settable
Scene change detection 
alarmON (LOW), ON (MID), ON (HIGH), OFF
Privacy zone ON/OFF (max. 8 zone settings)
Type 2x variable focal lens
Focal length f=3.8 mm - 8.0 mm
F number F1.4 - 1.8,...

Page 49

49
 Optional accessories Supported OS Windows
® 2000 Professional SP4, 
Windows® XP Home Edition SP2, 
Windows® XP Professional SP2
Supported browser Internet Explorer® 6.0 SP2, 
Internet Explorer® 7.0
* When supported OS is Windows® 2000 Professional 
SP4, Microsoft Internet Explorer® 6.0 SP1
Max. number of connected 
cameras8 (depending on conditions)
FTP client Alarm image transmission, FTP periodic transmission
Multi-screen Simultaneous display of images from 8 cameras 
(4 cameras x 2 groups)...

Page 50

Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America 
Security Systems
www.panasonic.com/security 
For customer support, call 1.877.733.3689 
Executive Office: Three Panasonic Way 2H-2, Secaucus, New 
Jersey 07094 
Zone Office 
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 
Central: 1707 N. Randal Road, Elgin, IL 60123 
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 
Western: 6550 Katella Ave., Cypress, CA 90630 Panasonic Canada Inc. 
5770 Ambler...
Start reading Panasonic Wv Nw484s Operating Instructions Manual

Related Manuals for Panasonic Wv Nw484s Operating Instructions Manual

All Panasonic manuals