Panasonic Wv Np502 Operating Instructions Manual

71
[Time adjustment]
Select the time adjustment method from the following.
Time adjusted by the selected method will be used as
the standard time of the camera.
Manual:Time set on the [Basic] tab on the Basic page
will be used as the standard time of the camera.
Synchronization with NTP server: Time automatically
adjusted by synchronizing with the NTP server will
be used as the standard time of the camera.
Default: Manual
[NTP server address]
Enter the IP address or the host name of the NTP serv-
er....

72
Configuring the network settings [Network]
IPv4 network
[DHCP]
Select On or Off to determine whether or not to use
the DHCP function. 
Configure the DHCP server not to assign the same IP
addresses used for the other network cameras and PCs
whose IP address is unique. Refer to the network
administrator for further information about the settings of
the server.
Default: Off [IP address(IPv4)]
When not using the DHCP function, enter the IP
address of the camera. Do not enter an IP address
already in use...

73
IPv6 network
[Manual]
Select On or Off to determine whether or not to man-
ually configure the IP address for IPv6 network (IPv6
address). 
On: Enter IPv6 address manually.
Off: Manual entry of IPv6 address will become unavail-
able.
Default: Off
[IP address(IPv6)]
When On is selected for Manual, manual entry of the
IPv6 address is required.
Do not enter an address already in use.
Note: • When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible
router and turn...

74
[Easy IP Seup accommodate period]
Select 20min or Unlimited to determine how long the network setting operation using the Panasoni\
c IP setting
software can be allowed.
20min: The network setting operation using the Panasonic IP setting software is\
 allowed for 20 minutes.
Unlimited: The network setting operation using the Panasonic IP setting software is\
 allowed without time limitation.
Default: 20min
Note:
• Refer to the network administrator for the addresses of each server.
• The port...

75
[DDNS]
Select On or Off to determine whether or not to use
the DDNS function. 
Default:Off
[Host name]
Enter the host name to be used.
Available number of characters: 1 - 64 characters
[User name]
Enter the user name (login name) to access the DDNS
server.
Available number of characters: 1 - 32 characters
[Password]
Enter the password to access the DDNS server.
Available number of characters: 0 - 32 characters
[Access interval]
Select the interval to access the DDNS server to check
the IP address and...

76
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the Network page. (pages 20 and 21: How to display/operate the setup menu)
The settings relating to SNMP can be configured on this page. It is poss\
ible to check the status of the camera by
connecting to the SNMP manager. When using the SNMP function, contact th\
e network administrator.
[Community]
Enter the community name to be monitored.
Available number of characters: 0 - 32 characters
Default: None (blank)
Important:
• When...

77
Configure the settings relating to the FTP periodic image transmission
[FTP img. trans.]
Click the [FTP img. trans.] tab on the Network page. (pages 20 and 21: How to display/operate the setup menu)
The settings relating to the periodic transmission of images to an FTP s\
erver can be configured  on this page. To
transmit images to an FTP server periodically, it is necessary to config\
ure the settings of the FTP server in advance.
( page 70) Refer to page 78 for descriptions of how to configure...

78
How to set the schedules
Step1
Check the check box of the desired day of the week of
FTP image transmission schedle. → The selected day of the week will be validated for
the schedule.
Step 2
To designate time, click [C] and select the desired
hour and minute.
When not designating time, check the checkbox of
24h.
Step 3
Click the [Set] button after completing the settings. → The result will be displayed at the bottom of the win-
dow.
Configure the schedule settings of the FTP periodic image...

79
How to delete the set schedule
Step1
Uncheck the check box of the set day of the week.
Step 2
Click the [Set] button after completing the settings. → The result will be displayed at the bottom of the win-
dow. 

80
Configure the settings relating to the schedules [Schedule]
On the Schedule page, it is possible to configure the settings relatin\
g to schedules as follows. •Alarm permission (Alarm input will be received only in the specified schedule.)
• VMD permission (Video motion detection will be active only in the speci\
fied schedule.)
• Access permission (Access to the camera will be allowed only in the spe\
cified schedule.) 
( pages 20 and 21: How to display/operate the setup menu)
Up to 5 schedules can...