Panasonic Wv Np502 Operating Instructions Manual

41
•When On is selected, only IPv4 access is avail-
able. 
• When On is selected for either MPEG-4(1) or
MPEG-4(2), only Off and Mic input are available
for Audio transmission/reception. 
• When On is selected for either MPEG-4(1) or
MPEG-4(2), the maximum concurrent access num-
ber is equal to or less than 10 users. 
[Image capture size]
Select QVGA or VGA for the image capture size of
MPEG-4 images.
Default: MPEG-4(1): VGA
MPEG-4(2): VGA
[Transmission priority ]
Select Constant bit rate or Frame rate...

42
Unicast port (MANUAL):Up to 14users can access a
single camera concurrently. It is necessary to select
Unicast port1(Image) and Unicast port2 (Audio)
manually to transmit images and audio from the
camera.
It is possible to fix the port number of the router used
for MPEG-4 image transmission via the Internet by
setting Unicast port (MANUAL) ( page 74). 
Refer to the operating instructions of the router in
use.
Multicast: Unlimited number of users can access a sin-
gle camera concurrently. Complete the...

43
Configure the settings relating to images, back focus and the privacy zo\
ne
[Image/Privacy]
Click the [Image/Privacy] tab on the Image/Audiopage. (pages 20 and 21: How to display/operate the setup
menu)
When the [Setup >>] button of each setting item is clicked, the detailed\
 settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring \
images displayed on the [Image/Privacy]
tab.
The following are descriptions of how to configure the settings...

44
Configure the settings relating to image quality (Image adjust setup \
menu)
Click the [Setup >>] button of Image adjust on the [Image/Privacy] tab of the Image/Audiopage. (page 43)
The settings relating to image quality can be configured with the setup \
menu displayed in a newly displayed window.
When the values are changed, the changed values will be applied to the c\
urrently displayed image on the
[Image/Privacy] tab.
[Super Dynamic]
Select On or Off to determine whether or not to acti-
vate the...

45
Fixshutter: The selected value will be set as the fixed
shutter speed.
3/100 fix, 2/100 fix, 1/100 fix, 1/250 fix, 1/500 fix, 
1/1 000 fix, 1/2 000 fix, 1/4 000 fix, 1/10 000 fix
Default: Outdoor scene
Note:
• When a faster shutter speed is selected, it is possi-
ble to capture a fast moving object with less blur. 
• When a faster shutter speed is selected, the sensi-
tivity will become lower. Smear also may appear
under bright light condition.
• When On is selected for Super Dynamic, only Outdoor...

46
[Black & white mode]
Select switching between the color mode and the black
& white mode from the following.
Off:The color mode is selected.
On: The black & white mode is selected. 
Auto1(Normal): The camera automatically switches
between the color mode and the black & white mode
in accordance with picture brightness (luminance).
The black & white mode will automatically be select-
ed when the lighting condition becomes darker,
while the color mode will automatically be selected
when it becomes...

47
Note:• Under the following conditions, color may not be faithfully processed. In these cases, select AWC. • When shooting a subject whose major part is athick color
• When shooting blue sky or sun at sunset
• When shooting a subject whose luminance is too low
• When AWC is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the + direction, the red
color will become thicker.
When the cursor is moved in the – direction, the red
color will be...

48
Set mask areas
When Off is selected for Super Dynamic and Back light compensation(\
BLC), it is possible to compensate for
backlight by masking brighter areas.
Step1
Display the Image adjust setup menu. ( page 44)
Step 2
Click the [Start] button of Mask area. → Borders will appear and the image displayed on the
[Image/Privacy] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked. → The clicked areas will be masked and will become
white. To cancel masking, click the area...

49
[Auto back focus]
The auto back focus function starts to automatically
adjust back focus based on a subject located in the cen-
ter of the screen by clicking the [Execute] button.
[Focus]
The back focus can be adjusted manually.
[Near] button:Click this button to adjust the focus to
the Near side.
[Reset] button: Click this button to reset the focus to
the default.
[Far] button: Click this button to adjust the focus to the
Far side.
[Adjusting method]
Select the back focus adjustment method upon...

50
Configure the settings relating to the privacy zone (Privacy zone setup\
 menu)
Click the [Setup >>] button of Privacy zone on the [Image/Privacy] tab of the Image/Audiopage. (page 43)
When there is a zone that is not to be displayed, set the zone as a priv\
acy zone to not to display. Up to 8 privacy
zones can be set.
[Area]
The privacy zone will be set when an area is designated
by dragging the mouse. Each zone can be overlapped.
Up to 8 privacy zones can be created and they will be
numbered in the...