Panasonic Wv Np502 Operating Instructions Manual

Image quality
Image quality
31
Image capture size: VGA
Image capture size: QVGA
Capacity of
SD/SDHC
memory card32 GB
16 GB8 GB
4 GB
2 GB
1 GB
512 MB
256 MB
128 MB 64 MB
Capacity of
SD/SDHC
memory card
Approx. 352 000 pics
Approx. 176 000 pics
Approx. 88 000 pics
Approx. 44 000 pics
Approx. 22 000 pics
Approx. 11 000 pics
Approx. 5 500 pics
Approx. 2 750 pics
Approx. 1 375 pics Approx. 687 pics
Approx. 416 000 pics
Approx. 208 000 pics
Approx. 104 000 pics
Approx. 52 000 pics
Approx. 26 000 pics
Approx....

32
Configure the settings relating to the logs [Log]
Click the [Log] tab on the Basic page. (pages 20 and 21: How to display/operate the setup menu)
The settings relating to the log list can be configured in this section.\
 Alarm
Settings for the alarm log list can be performed.
[Save logs]
Select On or Off to determine whether to save the
alarm logs.
On: Alarm logs will be saved.
Off: Alarm logs will not be saved.
Default: On
[Name of the destination directory for downloaded
images]
Enter the name of...

33
How the logs and images are saved depending on the settings for Alarm
[Log] tab
OffUseAlarm inputLogs: Logs will not be saved.
Images: Images will be saved. When available capacity of the
SD memory card ran out, the older images will be
overwritten by the newer images. 
* To display images on the SD memory card, it isnecessary to copy them onto the PC first. ( page
29)
On
Alarm: Save logs
Not use
Other than Alarm
input
–
[SD memory card] tab
SD memory card
Use
Not use –
Save trigger
Alarm input
Other...

34
How the logs and images are saved depending on the settings for Manual\
Logs and associated images
Manual:
Save logs
On
[Log] tab
Not use
Not use –
––
–
Use
Other than
Manual –Logs: Logs will not be saved.
Images: Images will not be saved.
Off
ManualOn
Off
[SD memory card] tab
SD memory card
Use
Other than
Manual –
Save trigger Overwrite
ManualOn
OffLogs: Up to 5 000
logs will be kept. When more than  5 000
logs are filed, the older logs will be overwritten by the
newer logs. In this case, the oldest...

35
How the logs and images are saved depending on the settings for FTP err\
or
Logs and associated images
OffUse
Not useOther than FTP
error
–
FTP error
Not use
–
Other than FTP
error
Logs: Logs will not be saved.
Images: Images will not be saved.
Logs: Logs will not be saved.
Images: Images will be saved. When available capacity of theSD memory card ran out, saving of images will
become impossible.* To display images on the SD memory card, it is necessary to copy them onto the PC first. ( page
29)...

36
Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG, H.264 and MPEG-4 images such as the setti\
ngs of image quality, audio, etc. can be
configured on this page.
The Image/Audiopage has 3 tabs; the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab), the [Ima\
ge/Privacy] tab and the
[Audio] tab.
Configure the settings relating to JPEG images [JPEG/H.264] 
(or [JPEG/MPEG-4])
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tub) on the  Image/Audiopage. (pages 20 and 21:...

37
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.264] tab on the Image/Audiopage. (pages 20 and 21: How to display/operate the setup
menu)
[JPEG/H.264] tab will be displayed when H.264 is selected for Video encoding format.
Configure the settings relating to H.264 image such as Max bit rate (p\
er client), Image capture size, Image quali-
ty, etc. in this section.
Refer to page 40 and 36 for the settings relating to MPEG-4 images and J\
PEG images respectively.
[Video...

38
Off:H.264 images and audio will be transmitted using
the UDP port.
Default: Off
Note:
• When On is selected, only Unicast port (AUTO)
will be available for Transmission type.
• When On is selected, it may take time to start dis-
playing H.264 images. 
• When On is selected, H.264 images may not be
displayed depending on the number of the concur-
rent access user and audio data availability, etc. 
• When On is selected, only IPv4 access is avail-
able. 
• When On is selected for either H.264(1) or...

39
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 5 seconds) to
refresh the displayed H.264 images.
If using under a network environment with frequent error
occurrences, shorten the refresh interval for H.264to
diminish image distortions. However, the refresh interval
may be longer than the set value.
0.2s/0.33s/0.5s/1s/2s/3s/4s/5s
Default: 3s
[Transmission type]
Select a MPEG-4 transmission type from the following.
Unicast port (AUTO): Up to 14users can access a sin-
gle camera...

40
Configure the settings relating to MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the Image/Audiopage. (pages 20 and 21: How to display/operate the setup
menu)
The [JPEG/MPEG-4] tab will be displayed when MPEG-4 is selected for Video encoding format. ( page 37)
Configure the settings relating to MPEG-4 image such as Max bit rate (\
per client)*, Image capture size, Image
quality, etc. in this section.
Refer to page 37 and 36 for the settings relating to H.264 images and JP\
EG images...