Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help171
3Configure the settings, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
SettingDescription
[Security Mode]LSelect the desired security mode.
LNo Encryption (Open), WEP, WPA-PSK and WPA2-PSK are 
available for the wireless devices, including the handset. 
Select the desired security mode for your wireless devices 
connected to the base unit. Default is set to WEP.
WEP...

Base Unit Settings
172For assistance, please visit http://www.panasonic.com/help
Note:
LYou need to register the handset to the base unit again when you change the security 
mode, the network key and/or the key index.
See “Registering the handset” on page 133.
LWhen you use WEP for the network key, set either the Network Key No. 1, No. 2, No. 3 
or No. 4 as a key index according to the setting of the wireless LAN card you use. When 
you do not use WEP, you are suggested to use WPA-PSK/WPA2-PSK as the...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help173
3Configure the setting, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
To configure MAC address filtering entry:
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, and then click [MAC Address Filtering].
3To add a new entry, click [Add] under the MAC Address Filtering Table heading.
LMAC Address Filtering Setting page is displayed....

Base Unit Settings
174For assistance, please visit http://www.panasonic.com/help
4Configure the setting, and then click [Add].
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LTo edit the setting:
1Click the desired entry number.
2Edit the items in the MAC Address Filtering Setting page.
3Click [Save].
4Click [Restart].
LTo delete the setting:
1Click the desired entry number.
2Click [Delete] in the MAC Address Filtering Setting page.
3Click [OK] in the...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help175
Status
The status pages allow you to view the status of the base unit.
The information displayed on the pages are useful when contacting an authorized 
servicenter.
1Click [Advanced Setup] on the Top Menu.
2Click the [Status] tab, then click the desired item on the left.
[Network Status] shows the WAN/LAN interface status and routing/ARP tables.
123
45
6
7
8
9
jkl
m
n
WP1050.book  Page 175  Wednesday, November 22, 2006  9:24...

Base Unit Settings
176For assistance, please visit http://www.panasonic.com/help
WAN Interface Status:
1MAC Address: Show the MAC address of the WAN port.
2Connection Mode: Show the Internet connection mode. (DHCP/
PPPoE/AP/Static)
3Connection Status: Show whether the WAN port is connecting to the 
Internet or not.
4IP Address: Show the IP address of the WAN port.
5Subnet Mask: Show the subnet mask of the WAN port.
6Default Gateway: Show the IP address of the default gateway.
7MTU: Show the current MTU...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help177
[DHCP Lease Table] shows the DHCP server status and lease table.
DHCP Server Status:
1DHCP  Server: Show whether the DHCP server feature is enabled 
or not.
2DNS Server: Show the IP address of the DNS server.
3Domain Name: Show the domain name of the local network.
4Lease Time(s): Show DHCP refresh interval time (in second) 
assigned for the DHCP clients connected to the 
local network.
5Lease Address: Show the IP address...

Base Unit Settings
178For assistance, please visit http://www.panasonic.com/help
[UPnP Port Mapping Table] shows the UPnP status and port mapping table.
UPnP Port Mapping Table:
1UPnP Status: Show whether UPnP feature is enabled or not.
2UPnP Port Mapping Table: Show the  list of UPnP client host’s IP address, 
along with the protocol and port number set to be 
opened for a specified amount of time for 
communication with UPnP feature.
1
2
WP1050.book  Page 178  Wednesday, November 22, 2006  9:24 AM 

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help179
[Wireless Status] shows the wireless LAN status.
Wireless Status:
1Mode: Show 802.11b or 802.11b/g.
2SSID: Show the network name.
3Channel: Show wireless data channel.
4SSID Broadcast: Show whether the SSID Broadcast feature is 
enabled or not.
5BSSID: Show the base unit’s MAC address currently in use 
by the handset.
6Security: Show the authentication methods and/or 
encryption types and Key Index number used for 
the...

Base Unit Settings
180For assistance, please visit http://www.panasonic.com/help
[Handset Status] shows the handset connection status.
Note:
LIt may take a while to display this screen in order to check if the handset is connected. Handset Status:
1Connection: Show the status of the handset registration and 
connection to the base unit.
2MAC Address: Show the MAC address of the registered handset.
3IP Address: Show the IP address of the handset.
1
23
WP1050.book  Page 180  Wednesday, November 22, 2006...