Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help141
Updating the firmware (Base Unit)
To prevent the leaking of customer information, illegal operation of this product, 
interference or involuntary shutdown etc., we recommend you update the firmware 
regularly. For firmware information, 
visit http://panasonic.co.jp/pcc/cs/en/telecom/wi-fi/us_wp1050.htm.
Important:
LDo not interrupt the firmware updating process by cutting the power supply until the 
updating is complete and...

Base Unit Settings
142For assistance, please visit http://www.panasonic.com/help
WP1050.book  Page 142  Wednesday, November 22, 2006  9:24 AM 

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help143
Advanced Setup
1Click [Advanced Setup] on the Top Menu.
1Ta b
LBasic: Display the setting pages for the Internet connection 
profile.
LAdvanced: Display the setting pages for the local network 
configuration, security, and routing.
LWireless: Display the setting pages for the basic and security 
settings for the wireless network connection.
LStatus: Display the status pages for the basic WAN/LAN and 
wireless network...

Base Unit Settings
144For assistance, please visit http://www.panasonic.com/help
2Click the desired tab, then click the desired item from the menu on the left side. 2Menu
Menu items contained in the selected Tab are shown.
3Sub menu 1
Sub menu 1 is shown as the heading title on the Menu page.
4Sub menu 2
Sub menu 2 is a separate page that is available from the Menu page by clicking 
the underlined item.
TabMenuSub menu1Sub menu2Page
Basic Internet 
ConnectionProfiles Profile Setting 147
Profile Selection...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help145
Wireless Wireless Basic Wireless Mode – 168
SSID –
Wireless Security Security Mode – 170
WEP Settings –
WPA-PSK/
WPA2-PSK 
Settings–
MAC Address 
FilteringMAC Address 
Filtering–172
MAC Address 
Filtering TableMAC Address 
Filtering Setting
Status Network Status WAN Interface 
Status
*1–175
LAN Interface 
Status
*1–
Routing Table –
ARP Table –
DHCP Lease Table DHCP Server 
Status
*2–177
DHCP Lease 
Table
*2–
UPnP Port...

Base Unit Settings
146For assistance, please visit http://www.panasonic.com/help
*1 While in AP (Bridge) mode, Interface Status is displayed instead of WAN Interface 
Status and LAN Interface Status.
*2 While in AP (Bridge) mode, these menus are not available.
*3 While in AP (Bridge) mode, these menus are displayed but these features are not 
available. 
*4 While in AP (Bridge) mode, this feature is available automatically.Maintenance Password – 182
Update Firmware – 184
Reset to Factory 
Default–186...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help147
Basic settings
Internet Connection:
This feature allows you to select and configure the Internet connection mode.
You can add, modify, and delete the Internet connection profile. You can also select the 
desired network profile to be used from the list of network profiles. Up to 4 profiles can be 
registered.
1Click [Advanced Setup] on the Top Menu.
2Click the [Basic] tab, then click [Internet Connection].
WP1050.book  Page...

Base Unit Settings
148For assistance, please visit http://www.panasonic.com/help
3To add a new entry, click the entry number with blank fields under the Profiles heading.
LThe Connection Mode page is displayed.
4Click the desired Internet connection mode under the Mode column.
LThe configuration page is displayed (page 48).
5Configure the Internet connection mode you select in step 4, then click [Save].
LSee “Configuring the Internet connection settings” on page 48.
LThe new profile is registered and...

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help149
Note:
LTo change the profile:
1Click the pull-down menu and select the desired profile under the Profile Selection 
heading in step 3.
2Click [Save].
3Click [Restart].
LTo edit the profile:
1Click the desired entry number in step 3. Then follow to steps 4 to 7.
LTo delete the profile:
1Click the desired entry number in step 3.
2Click [Delete]. 
3Click [OK] in the confirmation dialog box.
4Click the pull-down menu and select...

Base Unit Settings
150For assistance, please visit http://www.panasonic.com/help
MAC Address Clone:
This feature allows you to clone the MAC (Media Access Control) address of your 
computer’s network adaptor onto this product.
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. 
Some Internet service providers require that you register the MAC address of your 
computer’s network adaptor, which was connected to your cable or DSL modem during 
installation.
In such...