Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions
Here you can view all the pages of manual Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions . The Panasonic manuals for Phone are available online for free. You can easily download all the documents as PDF.
Page 161
![Page 161
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help161
3Configure the settings, then click [Save].
LCheck the box in the Log Output column to create a log of each action.
LIf you select [Enable] and check “Log Output”, the log will be output. If you select
[Disable], the log will not be output even if you check “Log Output”.
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThis feature is not available in AP (Bridge) mode....](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-160.png "Page 161
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help161
3Configure the settings, then click [Save].
LCheck the box in the Log Output column to create a log of each action.
LIf you select [Enable] and check “Log Output”, the log will be output. If you select
[Disable], the log will not be output even if you check “Log Output”.
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThis feature is not available in AP (Bridge) mode....")
Base Unit Settings For assistance, please visit http://www.panasonic.com/help161 3Configure the settings, then click [Save]. LCheck the box in the Log Output column to create a log of each action. LIf you select [Enable] and check “Log Output”, the log will be output. If you select [Disable], the log will not be output even if you check “Log Output”. 4Click [Restart]. LThe base unit automatically restarts and the Top Menu is displayed. Note: LThis feature is not available in AP (Bridge) mode....
Page 162
![Page 162
Base Unit Settings
162For assistance, please visit http://www.panasonic.com/help
Packet Filtering:
This feature allows you to configure the packet filtering settings, and to control the packets
to be received/transmitted between the Internet and the computers on your LAN.
Up to 20 settings can be registered.
1Click [Advanced Setup] on the Top Menu.
2Click the [Advanced] tab, then click [Packet Filtering].
WP1050.book Page 162 Wednesday, November 22, 2006 9:24 AM](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-161.png "Page 162
Base Unit Settings
162For assistance, please visit http://www.panasonic.com/help
Packet Filtering:
This feature allows you to configure the packet filtering settings, and to control the packets
to be received/transmitted between the Internet and the computers on your LAN.
Up to 20 settings can be registered.
1Click [Advanced Setup] on the Top Menu.
2Click the [Advanced] tab, then click [Packet Filtering].
WP1050.book Page 162 Wednesday, November 22, 2006 9:24 AM")
Base Unit Settings 162For assistance, please visit http://www.panasonic.com/help Packet Filtering: This feature allows you to configure the packet filtering settings, and to control the packets to be received/transmitted between the Internet and the computers on your LAN. Up to 20 settings can be registered. 1Click [Advanced Setup] on the Top Menu. 2Click the [Advanced] tab, then click [Packet Filtering]. WP1050.book Page 162 Wednesday, November 22, 2006 9:24 AM
Page 163
![Page 163
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help163
3To add a new entry, click [Add] under the Packet Filtering Table heading.
WP1050.book Page 163 Wednesday, November 22, 2006 9:24 AM](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-162.png "Page 163
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help163
3To add a new entry, click [Add] under the Packet Filtering Table heading.
WP1050.book Page 163 Wednesday, November 22, 2006 9:24 AM")
Base Unit Settings For assistance, please visit http://www.panasonic.com/help163 3To add a new entry, click [Add] under the Packet Filtering Table heading. WP1050.book Page 163 Wednesday, November 22, 2006 9:24 AM
Page 164
![Page 164
Base Unit Settings
164For assistance, please visit http://www.panasonic.com/help
4Configure the settings under the Packet Filtering Setting heading, then click [Add] to
add the new entry.
SettingDescription
[No.]LSelect the desired entry number for the packet filtering
setting. Entry number represents the priority. Entry number 1
has the highest priority.
[Status/Packet
Filtering]LSelect whether to enable or disable the packet filtering
feature.
[Action]LSelect whether to allow or deny IP packets...](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-163.png "Page 164
Base Unit Settings
164For assistance, please visit http://www.panasonic.com/help
4Configure the settings under the Packet Filtering Setting heading, then click [Add] to
add the new entry.
SettingDescription
[No.]LSelect the desired entry number for the packet filtering
setting. Entry number represents the priority. Entry number 1
has the highest priority.
[Status/Packet
Filtering]LSelect whether to enable or disable the packet filtering
feature.
[Action]LSelect whether to allow or deny IP packets...")
Base Unit Settings 164For assistance, please visit http://www.panasonic.com/help 4Configure the settings under the Packet Filtering Setting heading, then click [Add] to add the new entry. SettingDescription [No.]LSelect the desired entry number for the packet filtering setting. Entry number represents the priority. Entry number 1 has the highest priority. [Status/Packet Filtering]LSelect whether to enable or disable the packet filtering feature. [Action]LSelect whether to allow or deny IP packets...
Page 165
![Page 165
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help165
*1 When direction is WiL, Source IP ‘local’ is Invalid. When direction is LiW,
Destination IP ‘local’ is invalid.
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Important:
LThe packet filtering is NOT executed for the DMZ host.
Note:
LTo edit the setting:
1Click the desired entry number in step 3.
2Edit the items in the Packet Filtering Setting page.
3Click [Save].
4Click...](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-164.png "Page 165
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help165
*1 When direction is WiL, Source IP ‘local’ is Invalid. When direction is LiW,
Destination IP ‘local’ is invalid.
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Important:
LThe packet filtering is NOT executed for the DMZ host.
Note:
LTo edit the setting:
1Click the desired entry number in step 3.
2Edit the items in the Packet Filtering Setting page.
3Click [Save].
4Click...")
Base Unit Settings For assistance, please visit http://www.panasonic.com/help165 *1 When direction is WiL, Source IP ‘local’ is Invalid. When direction is LiW, Destination IP ‘local’ is invalid. 5Click [Restart]. LThe base unit automatically restarts and the Top Menu is displayed. Important: LThe packet filtering is NOT executed for the DMZ host. Note: LTo edit the setting: 1Click the desired entry number in step 3. 2Edit the items in the Packet Filtering Setting page. 3Click [Save]. 4Click...
Page 166
![Page 166
Base Unit Settings
166For assistance, please visit http://www.panasonic.com/help
Routing:
This feature allows you to set static routing between the base unit and another network.
Use this feature when you have several local networks. Up to 4 settings can be registered.
1Click [Advanced Setup] on the Top Menu.
2Click the [Advanced] tab, then click [Routing].
3To add a new entry, click [Add] under the Static Routing Table heading.
WP1050.book Page 166 Wednesday, November 22, 2006 9:24 AM](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-165.png "Page 166
Base Unit Settings
166For assistance, please visit http://www.panasonic.com/help
Routing:
This feature allows you to set static routing between the base unit and another network.
Use this feature when you have several local networks. Up to 4 settings can be registered.
1Click [Advanced Setup] on the Top Menu.
2Click the [Advanced] tab, then click [Routing].
3To add a new entry, click [Add] under the Static Routing Table heading.
WP1050.book Page 166 Wednesday, November 22, 2006 9:24 AM")
Base Unit Settings 166For assistance, please visit http://www.panasonic.com/help Routing: This feature allows you to set static routing between the base unit and another network. Use this feature when you have several local networks. Up to 4 settings can be registered. 1Click [Advanced Setup] on the Top Menu. 2Click the [Advanced] tab, then click [Routing]. 3To add a new entry, click [Add] under the Static Routing Table heading. WP1050.book Page 166 Wednesday, November 22, 2006 9:24 AM
Page 167
![Page 167
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help167
4Configure the settings under the Routing Setting heading, then click [Add] to add a new
entry.
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LTo edit the setting:
1Click the desired entry number in step 3.
2Edit the items in the Routing Setting page.
3Click [Save].
4Click [Restart].
LTo delete the setting:
1Click the desired entry number in step 3.
2Click [Delete] in the...](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-166.png "Page 167
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help167
4Configure the settings under the Routing Setting heading, then click [Add] to add a new
entry.
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LTo edit the setting:
1Click the desired entry number in step 3.
2Edit the items in the Routing Setting page.
3Click [Save].
4Click [Restart].
LTo delete the setting:
1Click the desired entry number in step 3.
2Click [Delete] in the...")
Base Unit Settings For assistance, please visit http://www.panasonic.com/help167 4Configure the settings under the Routing Setting heading, then click [Add] to add a new entry. 5Click [Restart]. LThe base unit automatically restarts and the Top Menu is displayed. Note: LTo edit the setting: 1Click the desired entry number in step 3. 2Edit the items in the Routing Setting page. 3Click [Save]. 4Click [Restart]. LTo delete the setting: 1Click the desired entry number in step 3. 2Click [Delete] in the...
Page 168
![Page 168
Base Unit Settings
168For assistance, please visit http://www.panasonic.com/help
Wireless
Wireless Basic:
This feature allows you to set the wireless mode and network name (SSID: Service Set
IDentifier).
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, then click [Wireless Basic].
WP1050.book Page 168 Wednesday, November 22, 2006 9:24 AM](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-167.png "Page 168
Base Unit Settings
168For assistance, please visit http://www.panasonic.com/help
Wireless
Wireless Basic:
This feature allows you to set the wireless mode and network name (SSID: Service Set
IDentifier).
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, then click [Wireless Basic].
WP1050.book Page 168 Wednesday, November 22, 2006 9:24 AM")
Base Unit Settings 168For assistance, please visit http://www.panasonic.com/help Wireless Wireless Basic: This feature allows you to set the wireless mode and network name (SSID: Service Set IDentifier). 1Click [Advanced Setup] on the Top Menu. 2Click the [Wireless] tab, then click [Wireless Basic]. WP1050.book Page 168 Wednesday, November 22, 2006 9:24 AM
Page 169
![Page 169
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help169
3Configure the settings, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LYou need to register the handset to the base unit again when you change the network
name (SSID). See “Registering the handset” on page 133.
SettingDescription
[Mode]LSelect your wireless network mode from the pull-down menu.
LIf you have both 802.11b and 802.11g wireless devices in
your...](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-168.png "Page 169
Base Unit Settings
For assistance, please visit http://www.panasonic.com/help169
3Configure the settings, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LYou need to register the handset to the base unit again when you change the network
name (SSID). See “Registering the handset” on page 133.
SettingDescription
[Mode]LSelect your wireless network mode from the pull-down menu.
LIf you have both 802.11b and 802.11g wireless devices in
your...")
Base Unit Settings For assistance, please visit http://www.panasonic.com/help169 3Configure the settings, then click [Save]. 4Click [Restart]. LThe base unit automatically restarts and the Top Menu is displayed. Note: LYou need to register the handset to the base unit again when you change the network name (SSID). See “Registering the handset” on page 133. SettingDescription [Mode]LSelect your wireless network mode from the pull-down menu. LIf you have both 802.11b and 802.11g wireless devices in your...
Page 170
![Page 170
Base Unit Settings
170For assistance, please visit http://www.panasonic.com/help
Wireless Security:
This feature allows you to set security measures for connecting to wireless LAN.
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, then click [Wireless Security].
WP1050.book Page 170 Wednesday, November 22, 2006 9:24 AM](http://img.usermanuals.tech/thumb/58/70024/w300_kx-wp1050_en_om_d-169.png "Page 170
Base Unit Settings
170For assistance, please visit http://www.panasonic.com/help
Wireless Security:
This feature allows you to set security measures for connecting to wireless LAN.
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, then click [Wireless Security].
WP1050.book Page 170 Wednesday, November 22, 2006 9:24 AM")
Base Unit Settings 170For assistance, please visit http://www.panasonic.com/help Wireless Security: This feature allows you to set security measures for connecting to wireless LAN. 1Click [Advanced Setup] on the Top Menu. 2Click the [Wireless] tab, then click [Wireless Security]. WP1050.book Page 170 Wednesday, November 22, 2006 9:24 AM