Panasonic Vdr D250 Operating Instructions Manual

81LSQT1011
Editing
Editing scenes
Editing
Editing scenes
(RAM) (-RW‹VR›)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW (Video format) and DVD-R cannot be deleted.
¬Rotate the mode dial to select  .
1 Press the   button during playback.
2 When the confirmation message appears, select [YES], then press the 
joystick.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ DELETE] # 
[ SELECT] or [ ALL] and press the joystick.
≥When [ALL] is selected, the following scenes will...

82LSQT1011
Editing
Editing scenes
To complete editing
Press the MENU button.
≥To delete an unwanted part of a scene, divide the 
scene first, and then delete the unnecessary part. 
(l83)
≥In case of [ALL], the deletion may take time if there 
are many scenes on the disc.
≥Do not turn off this unit while deleting.≥When you delete scenes, use a battery with 
sufficient battery power or use the AC adaptor.
≥It may not be possible to delete scenes that have 
been divided. Combine the divided scenes, and...

83LSQT1011
Editing
Editing scenes
(RAM) (-RW‹VR›)
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary 
portion.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ DIVIDE] and press the 
joystick.
2 Select the scene to be divided, then press the 
joystick.
The selected scene is played back.
3 When you reach the area where you want to 
divide the scene, move the joystick down to set 
the dividing point.
≥Using slow-motion...

84LSQT1011
Editing
Editing scenes
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ COMBINE] and press the 
joystick.
2 Select the scene to be combined, then press the 
joystick.
≥The selected scene and the next scene are combined.
≥If you wish to combine scenes that are not next to each other or 
scenes with different recording dates, first create a playlist and then 
combine the scenes on the playlist. 
(l86, 91)
3 When the confirmation message...

85LSQT1011
Editing
Using playlists
Using playlists
You can create a playlist by gathering your favorites from the recorded scenes.
Since the playlist is not created by copying data, you will consume little of the disc capacity by 
making a playlist.
≥If you create or delete playlists, the original scenes will not be modified. Editing scenes on a 
playlist will not affect the original scenes.
≥The maximum number of items on a disc (per side)
– Playlists: 99
– Playlist scenes: 999≥If original scenes are...

86LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [PLAYMODE] # 
[PLAYLIST] and press the joystick.
2 Select [CREATE], then press the joystick.
3 Select the scene to be added to the playlist, then 
press the joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene will be 
canceled.
≥Up to 8 scenes can be set in succession.
≥The scenes are registered in the...

87LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [PLAYMODE] # 
[PLAYLIST] and press the joystick.
2 Select the playlist to be played back, then press 
the joystick.
Scenes in the selected playlist are displayed as thumbnails.
3 Select the scene to start playback, then press the 
joystick.
To select a different playlist
When the first scene is selected in the playlist thumbnail view screen, move the joystick left. The...

88LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
Editing scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ ADD], then press the joystick.
4 Select the scene to be added, then press the 
joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene...

89LSQT1011
Editing
Using playlists
The scenes in a playlist can be moved.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ MOVE], then press the joystick.
4 Select the scene to be moved, then press the 
joystick.
The selected scene is encircled by a yellow frame, and the position 
to insert is shown by a red bar.
5 Select the position to insert the scene, then...

90LSQT1011
Editing
Using playlists
You can divide a scene into two parts.
≥Dividing scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ DIVIDE], then press the joystick.
4 Select the scene to be divided, then press the 
joystick.
The selected scene is played back.
5 When you reach the area where you want...