Panasonic Vdr D250 Operating Instructions Manual

121LSQT1011
With a computer
Installation (Windows)
1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
≥If the [Setup Menu] screen does not appear, double-click the CD-ROM drive 
icon in [My Computer].
2 Click [DVDfunSTUDIO].
≥The software application may not run properly if you cancel the installation at 
any point e.g. by pressing [Cancel].
≥Depending on the operating environment, you may be required to install 
DirectX 9.0b. If so, click [Yes], and install it.
If you install...

122LSQT1011
Installation (Windows)
With a computer
For details on how to use the software applications, read the PDF instructions.
≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l113)
∫DVD-RAM Driver
Select [start] # [All Programs (Programs)] # [DVD-RAM] # [DVD-RAM 
Driver] # [Using DVD-RAM disc].
∫DVD-MovieAlbumSE
Select
 [start] # [All Programs (Programs)] # [Panasonic] # 
[DVD-MovieAlbumSE]
 # [Operation Manual].
∫DVDfunSTUDIO
Select [start] # [All Programs...

123LSQT1011
With a computer
Connection and recognition (Windows)
Connection and recognition (Windows)
After the driver and software applications are installed, the unit must be connected to the computer 
and be correctly recognized by the computer.
≥Connect after installing the driver and software applications.
≥If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running, 
wait until it finishes, then remove the CD-ROM.)
≥If the recognition procedure is not accomplished...

124LSQT1011
Connection and recognition (Windows)
With a computer
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (l125).
≥When the unit is connected to a computer in disc 
playback mode, no image will appear on the LCD 
monitor or viewfinder.
≥When this unit is connected to a computer, you 
cannot use this unit’s DISC EJECT lever to remove 
a disc. Use Windows Explorer to right-click the drive...

125LSQT1011
With a computer
Connection and recognition (Windows)
∫In card playback mode (When accessing the card)
[Removable Disk] is displayed in [My Computer].
Example folder structure of an SD card:
≥JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software that supports JPEG pictures.
≥Up to 999 files can be recorded in the [100CDPFP] or other such folder.
≥The DPOF setting files are recorded in the [MISC] folder.
≥Do not use the...

126LSQT1011
Connection and recognition (Windows)
With a computer
To verify the unit is correctly recognized by the computer, select the unit’s mode, connect the unit to 
the computer via the USB cable and then follow the steps below.
≥With some computers including those made by NEC, the Device Manager may not be displayed 
if a mode that places restrictions on the functions has been established. Consult the 
manufacturer or follow the steps in your computer’s operating instructions to establish a mode in...

127LSQT1011
With a computer
Creating a DVD-Video disc on a computer (Windows)
Creating a DVD-Video disc on a computer 
(Windows)
Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/
DVD-R disc) from the images recorded on this unit.
≥Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
≥When using DVD-MovieAlbumSE or DVDfunSTUDIO, log on to your computer as Administrator 
with a login name equally authorized. If you log on with a login name...

128LSQT1011
Creating a DVD-Video disc on a computer (Windows)
With a computer
3(On the computer)
Select [start] # [All Programs (Programs)] # 
[Panasonic]
 # [DVD-MovieAlbumSE] # 
[DVD-MovieAlbumSE].
DVD-MovieAlbumSE starts and the images recorded on the disc are displayed.
4(When using a DVD-RAM only)
Edit the images on the disc as required.
5 Click   ([Additional]) and select [File Export] # 
[Export all titles] or [Export a title].
6 Set the export settings in the [Export all titles] ([Export a...

129LSQT1011
With a computer
Creating a DVD-Video disc on a computer (Windows)
9 When the [CollectTool] screen appears, click [OK].
The exported scene will be automatically registered on the DVDfunSTUDIO 
editing screen.
10 Edit the DVD menu as required.
≥Set the disc size to [8 cm DVD].
11 Click [Burning].
Writing to DVD-RW/DVD-R disc will start.
When writing is complete, the disc is ejected automatically.
≥The DISC EJECT lever on this unit does not work 
when the unit is connected to a computer. Use the...

130LSQT1011
Before using with a computer (Macintosh)
With a computer
Before using with a computer (Macintosh)
∫When using a disc recorded on this unit
Before using DVD-RW (VR format), DVD-RW (Video format) and DVD-R on the computer, finalize 
them on this unit.
∫When using an SD card recorded on this unit
What you can do with a computer
Can doSoftware used
Playing back on a computerDVD-RAM or DVD-RW (VR format): Playback is not possible
DVD-RW (Video format) or DVD-R:
Standard OS or commercially...