Panasonic Vdr D250 Operating Instructions Manual

101LSQT1011
Disc and card management
Finalizing a disc
(-RW‹V›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ UN-FINALIZE] # [YES] and press the 
joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
≥When un-finalizing is complete, press the MENU button to exit the message screen.
≥DVD-RW (VR format) cannot be un-finalized. DVD-
RW (VR format) after finalization can be recorded 
and edited in the same way as DVD-RW (VR 
format)...

102LSQT1011
Disc and card management
Protecting a disc
Protecting a disc
(RAM) (-RW‹VR›)
This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
To release disc protection
1)...

103LSQT1011
Disc and card management
Displaying disc information
Displaying disc information
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded scenes, the remaining space and whether or not the 
disc is finalized or protected is displayed.
¬Rotate the mode dial to select  .
Press the MENU button, then select [ SETUP] # 
[INFORMATION] # [YES] and press the joystick.
To exit the information screen
Press the MENU button.
D250&300(P_PC)eng.book  103 ページ  ２００６年１月２０日　金曜日　午後２時３分 

104LSQT1011
With other products
With a TV
With other products
With a TV
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The motion pictures and still pictures recorded by this unit can be played back on a TV.
≥Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
* If the TV has an S Video terminal, also connect the 
S Video plug to it. This allows you to enjoy more 
beautiful pictures.
2 Turn on this unit, then rotate the mode dial to select   or  .
3 Change the...

105LSQT1011
With other products
With a TV
∫To watch images with a 16:9 aspect ratio on a regular TV (4:3)
When playing back motion pictures recorded with a 16:9 aspect ratio ([ASPECT] was set to [16:9]) 
or still pictures recorded with a 16:9 aspect ratio ([PICTURE SIZE] was set to [ ] (VDR-D300)/
[ ] (VDR-D250)) on a TV with a 4:3 aspect ratio, the images may be squeezed horizontally. In 
this case, change the menu setting to play back the pictures in the original aspect ratio. (Depending 
on the TV...

106LSQT1011
With other products
With a DVD recorder/player
With a DVD recorder/player
≥When playing back a disc on a DVD recorder/player, place the device so that the disc lies flat.
(RAM) (-RW‹VR›)
Insert the disc in the DVD recorder/player, then play 
it back.
≥Playback is only possible on devices that support 
8 cm (3z) DVD-RAM or DVD-RW (VR format). See 
the operating instructions for DVD recorder/player.≥DVD-RW (VR format) may have to be finalized. In 
this case, finalize the disc on this unit....

107LSQT1011
With other products
With a DVD recorder/player
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard 
disk.
≥If you want to record (dub) a disc that the DVD recorder is not compatible with, connect this unit 
and the DVD recorder with the AV/S cable and then record (dub) the disc. 
(l108)
1[Only when you record (dub) a DVD-RW (Video format) or DVD-R]
Finalize the disc on this unit. (l100)
2 Insert the disc in the DVD...

108LSQT1011
With other products
With a VCR
With a VCR
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
You can record (dub) images played back on this unit onto other video devices.
You can create a playlist by gathering the scenes you want to record (dub), then record (dub) the 
scenes in this playlist only to other devices. (l86)
≥Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a video 
device.
* If the video device has an S Video terminal, 
also connect the S Video...

109LSQT1011
With other products
With a printer (PictBridge)
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with 
PictBridge. (Read the operating instructions for the printer.) 
≥Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then 
rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ USB...

11 0LSQT1011
With other products
With a printer (PictBridge)
6 Select the date print setting on [ DATE PRINT].
≥If the printer is not capable of date printing, this setting is unavailable.
7 Select the paper size setting on [ PAPER SIZE].
≥You cannot set paper sizes not supported on the printer.
8 Select the layout setting on [ PAGE LAYOUT].
≥You cannot set page layouts not supported on the printer.
9 Select [ PRINT] # [YES] and press the joystick. 
The pictures are printed.
≥Exit PictBridge by...