Panasonic Vdr D250 Operating Instructions Manual

91LSQT1011
Editing
Using playlists
Two consecutive scenes can be combined into one.
≥Combining scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ COMBINE], then press the joystick.
4 Select the scene to be combined, then press the 
joystick.
≥The selected scene and the next scene are combined.
5 When the...

92LSQT1011
Editing
Using playlists
≥Deleting scenes on a playlist will not affect the original scenes.
Deleting scenes one at a time:
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the   button during playback.
2 When the confirmation message appears, select [YES], then press the 
joystick.
Deleting multiple scenes from the thumbnail display:
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be...

93LSQT1011
Editing
Using playlists
5
(Only when [SELECT] is selected in step 3)
Press the   button.
6 When the confirmation message appears, select [YES], then press the 
joystick.
(Only when [SELECT] is selected in step 3)
To continue deleting other scenes
Repeat steps 4-6.
To complete editing
Press the MENU button.
≥Deleting scenes on a playlist will not increase the 
remaining capacity for recording.
≥The playlist itself is deleted if you delete all the 
scenes in it.≥When a playlist is deleted, the...

94LSQT1011
Editing
Editing still pictures
Editing still pictures
(SD)
The deleted files cannot be restored.
¬Rotate the mode dial to select  .
1 Press the   button during playback.
2 When the confirmation message appears, select [YES], then press the 
joystick.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ DELETE] 
# [ SELECT] or [ ALL] and press the joystick.
≥When [ALL] is selected, all files on the SD card except the locked 
files will be erased. Proceed to step 4.
2(Only...

95LSQT1011
Editing
Editing still pictures
To complete editing
Press the MENU button.
∫Deleting still picture files recorded on an SD card by other products
A still picture file (other than JPEG) that cannot be played back on this unit may be erased.
≥In case of [ALL], the deletion may take time if there 
are many files on the SD card.
≥Do not turn off this unit while deleting.
≥When you delete files, use a battery with sufficient 
battery power or use the AC adaptor.≥Do not remove the SD card while...

96LSQT1011
Editing
Editing still pictures
(SD)
Still picture files recorded on an SD card can be locked so that they may not be deleted by mistake. 
(However even if you lock some files on an SD card, formatting the card will delete all the files.)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [LOCK] # [YES] and 
press the joystick.
2 Select the file to be protected, then press the 
joystick.
[ ] display appears and the selected file is locked.
≥Press the joystick...

97LSQT1011
Editing
Editing still pictures
(SD)
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD 
card.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [ DPOF SET] # [SET] and 
press the joystick.
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then 
press the joystick.
≥You can select from 0 to...

98LSQT1011
Disc and card management
Formatting discs and cards
Disc and card management
Formatting discs and cards
(RAM) (-RW‹VR›) (-RW‹V›)
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [FORMATDISC] # [YES] and press the 
joystick.
≥When formatting a DVD-RAM, skip to step 3.
2(When formatting a DVD-RW only)
Select format type (l24), then press the joystick.
3 When the...

99LSQT1011
Disc and card management
Formatting discs and cards
(SD)
Please be aware that if an SD card is formatted, then all the data recorded on the card will be 
erased. Store important data on a computer, etc.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ FORMAT CARD] # [YES] and press the 
joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
≥When formatting is complete, press the MENU button to exit the message screen....

100LSQT1011
Disc and card management
Finalizing a disc
Finalizing a disc
(-RW‹VR›) (-RW‹V›) (-R)
To play back a DVD-RW (Video format) or a DVD-R on other devices e.g. a DVD player, finalize the 
disc.
¬Connect this unit to the AC adaptor. (Finalization cannot be executed using a battery.)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ FINALIZE] # [YES] and press the joystick.
≥When finalizing a DVD-RW (VR format), skip to step 3.
2[When finalizing a DVD-RW (Video...