Panasonic Vdr D250 Operating Instructions Manual

							81LSQT1011
Editing
Editing scenes
Editing
Editing scenes
(RAM) (-RW‹VR›)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW (Video format) and DVD-R cannot be deleted.
¬Rotate the mode dial to select  .
1 Press the   button during playback.
2 When the confirmation message appears, select [YES], then press the 
joystick.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ DELETE] # 
[ SELECT] or [ ALL] and press the joystick.
≥When [ALL] is selected, the following scenes will be deleted. Proceed 
to step 4.
– When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the disc
– When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date
2(Only when [SELECT] is selected in step 1)
Select the scene to be deleted, then press the 
joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene will be 
canceled.
≥Up to 8 scenes displayed on a page can be set in succession.
3(Only when [SELECT] is selected in step 1)
Press the   button.
4 When the confirmation message appears, select [YES], then press the 
joystick.
(Only when [SELECT] is selected in step 1)
To continue deleting other scenes
Repeat steps 2-4.
Deleting scenes
This is for deleting scenes recorded on discs.
Deleting scenes one at a time
Deleting multiple scenes from the thumbnail display
D250&300(P_PC)eng.book  81 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							82LSQT1011
Editing
Editing scenes
To complete editing
Press the MENU button.
≥To delete an unwanted part of a scene, divide the 
scene first, and then delete the unnecessary part. 
(l83)
≥In case of [ALL], the deletion may take time if there 
are many scenes on the disc.
≥Do not turn off this unit while deleting.≥When you delete scenes, use a battery with 
sufficient battery power or use the AC adaptor.
≥It may not be possible to delete scenes that have 
been divided. Combine the divided scenes, and 
then delete them.
D250&300(P_PC)eng.book  82 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							83LSQT1011
Editing
Editing scenes
(RAM) (-RW‹VR›)
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary 
portion.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ DIVIDE] and press the 
joystick.
2 Select the scene to be divided, then press the 
joystick.
The selected scene is played back.
3 When you reach the area where you want to 
divide the scene, move the joystick down to set 
the dividing point.
≥Using slow-motion playback or frame-by-frame playback makes it 
easy to search for the point where you want to divide the scene. 
(l77)
4 When the confirmation message appears, select [YES], then press the 
joystick.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
Dividing a scene
This is for dividing a scene into two.
D250&300(P_PC)eng.book  83 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							84LSQT1011
Editing
Editing scenes
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ COMBINE] and press the 
joystick.
2 Select the scene to be combined, then press the 
joystick.
≥The selected scene and the next scene are combined.
≥If you wish to combine scenes that are not next to each other or 
scenes with different recording dates, first create a playlist and then 
combine the scenes on the playlist. 
(l86, 91)
3 When the confirmation message appears, select [YES], then press the 
joystick.
To continue combining other scenes
Repeat steps 2-3.
To complete editing
Press the MENU button.
Combining scenes
This function is only for combining two consecutive scenes into one.
D250&300(P_PC)eng.book  84 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							85LSQT1011
Editing
Using playlists
Using playlists
You can create a playlist by gathering your favorites from the recorded scenes.
Since the playlist is not created by copying data, you will consume little of the disc capacity by 
making a playlist.
≥If you create or delete playlists, the original scenes will not be modified. Editing scenes on a 
playlist will not affect the original scenes.
≥The maximum number of items on a disc (per side)
– Playlists: 99
– Playlist scenes: 999≥If original scenes are deleted, the portion of playlists 
created with these scenes is also deleted.
What is a playlist?
Recorded scenes
Playlist
D250&300(P_PC)eng.book  85 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							86LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [PLAYMODE] # 
[PLAYLIST] and press the joystick.
2 Select [CREATE], then press the joystick.
3 Select the scene to be added to the playlist, then 
press the joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene will be 
canceled.
≥Up to 8 scenes can be set in succession.
≥The scenes are registered in the playlist in the order that they were selected. After creating a 
playlist, the order of the scenes in it can be changed by [MOVE] function. (l89)
4 Press the MENU button.
5 When the confirmation message appears, select [YES], then press the 
joystick.
The thumbnail view screen of the created playlist is displayed.
To add another scene to the same playlist
Select [ADD]. (l88)
To playback a playlist
Select the scene to start playback, then press the joystick.
Creating a new playlist
D250&300(P_PC)eng.book  86 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							87LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [PLAYMODE] # 
[PLAYLIST] and press the joystick.
2 Select the playlist to be played back, then press 
the joystick.
Scenes in the selected playlist are displayed as thumbnails.
3 Select the scene to start playback, then press the 
joystick.
To select a different playlist
When the first scene is selected in the playlist thumbnail view screen, move the joystick left. The 
screen returns to the PLAYLIST VIEW (step 2).
To return to showing the original scenes
Press the MENU button, then select [ PLAY SETUP] # [PLAYMODE] # [VIEW ALL] or 
[BY DATE] and press the joystick.
Playing back a playlist
D250&300(P_PC)eng.book  87 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							88LSQT1011
Editing
Using playlists
(RAM) (-RW‹VR›)
Editing scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ ADD], then press the joystick.
4 Select the scene to be added, then press the 
joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene will be 
canceled.
≥Up to 8 scenes can be set in succession.
≥The scenes are added to the playlist in the order that they were selected. The order of the scenes 
in the playlist can be changed by [MOVE] function. (l89)
5 Press the MENU button.
6 When the confirmation message appears, select [YES], then press the 
joystick.
The thumbnail view screen of the playlist that scenes were added to is displayed.
To continue adding scenes to the playlist
Repeat steps 1-6.
Editing a playlist
Adding scenes to playlist
D250&300(P_PC)eng.book  88 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							89LSQT1011
Editing
Using playlists
The scenes in a playlist can be moved.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ MOVE], then press the joystick.
4 Select the scene to be moved, then press the 
joystick.
The selected scene is encircled by a yellow frame, and the position 
to insert is shown by a red bar.
5 Select the position to insert the scene, then press 
the joystick.
To continue moving other scenes in the playlist
Repeat steps 4-5.
To complete editing
Press the MENU button.
Moving scenes
D250&300(P_PC)eng.book  89 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							90LSQT1011
Editing
Using playlists
You can divide a scene into two parts.
≥Dividing scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l87, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and 
press the joystick.
2 Select the playlist to be edited, then press the 
joystick.
3 Select [ DIVIDE], then press the joystick.
4 Select the scene to be divided, then press the 
joystick.
The selected scene is played back.
5 When you reach the area where you want to 
divide the scene, move the joystick down to set 
the dividing point.
≥Using slow-motion playback or frame-by-frame playback makes it 
easy to search for the point where you want to divide the scene. 
(l77)
6 When the confirmation message appears, select [YES], then press the 
joystick.
To continue dividing other scenes
Repeat steps 4-6.
To complete editing
Press the MENU button.
Dividing a scene
D250&300(P_PC)eng.book  90 ページ  ２００６年１月２０日　金曜日　午後２時３分