Panasonic Vdr D250 Operating Instructions Manual

							131LSQT1011
With a computer
Before using with a computer (Macintosh)
The following software applications are contained on the provided CD-ROM.
∫Pixe VRF Browser EX
This software is for importing motion pictures recorded on disc to a computer. The motion pictures 
imported to the computer can be edited with [MPEG Editor]. The motion pictures saved on the 
computer with this software become the contents of the DVD-Video or Video CD disc created with 
ImageMixer VCD/DVD2.
APreview window
BProgram List/Playlist/Title List window
CDrive select button
DVideo List window
The contents of the program etc. selected in B are shown.
E[Save] button
F[MPEG Editor] button
Contents on provided CD-ROM
A
BCE
D
F
D250&300(P_PC)eng.book  131 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							132LSQT1011
Before using with a computer (Macintosh)
With a computer
∫ImageMixer VCD/DVD2
This software is for creating DVD-Video and Video CD discs.
Use this software when burning a DVD-Video or Video CD disc from motion pictures saved using 
Pixe VRF Browser EX. For details, refer to page 137.
≥To create a DVD-Video disc, a separate DVD-RW/DVD-R/+RW/+R drive is required.
To create a Video CD disc, a separate CD-RW/CD-R drive is required.
1 Save the motion pictures from the disc to the computer with Pixe VRF 
Browser EX.
A[Save] button
2 Create a DVD or Video CD menu with ImageMixer VCD/DVD2 and then 
write the data to a new disc.
BDVD or Video CD menus created
Arrange the motion pictures saved on the computer with Pixe VRF Browser EX and edit the 
menu design.
CWrite button
The contents start being written to disc.
3 A DVD-Video or Video CD disc is created.
≥Playback is possible on a DVD player.
A
B
C12 3
D250&300(P_PC)eng.book  132 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							133LSQT1011
With a computer
Before using with a computer (Macintosh)
≥A CD-ROM drive is necessary to install the supplied software.
≥Even if the system requirements mentioned in these operating instructions are fulfilled, some 
computers cannot be used.
≥Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with 
any other USB cables.)
∫Pixe VRF Browser EX
∫Pixe VRF Browser EX specifications
Operating environment
OSMac OS X v10.2.8, v10.3.4 to v10.3.9, v10.4.1 to v10.4.2
≥Mac OS X Server is not supported. 
CPUiMac G4, iMac G5, iBook G4, PowerBook G4, Power Mac G5, eMac, 
Mac mini Series with USB 2.0 port as a standard equipment
PowerPC G4 or above
Memory256 MB or more (512 MB or more recommended)
GraphicsMinimum of 1024k768 pixels, 32,000 colors (Full color recommended)
≥Will not run correctly with a screen smaller than 1024k768, or with 
less than 256 colors. 
Other requirementsDVD Video Recording format:DVD-RAM and DVD-RW discs
DVD-Video format:DVD-RW and DVD-R discs
Compatible formatsDVD Video Recording format (DVD-RAM/DVD-RW)
DVD-Video format (DVD-RW/DVD-R)
Save formatsMPEG2 motion picturesProgram stream
Elementary stream
Still pictures PICT format
Reading methodDirect reading from DVD media
Folder reading
D250&300(P_PC)eng.book  133 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							134LSQT1011
Before using with a computer (Macintosh)
With a computer
∫ImageMixer VCD/DVD2
≥To compile a disc, a separate recording drive is required.
∫Using Built-in SD Drive
≥The USB equipment operates with the driver installed as standard in OS.
OSMac OS X v10.2.8, v10.3.4 to v10.3.9, v10.4.1 to v10.4.2
≥Mac OS X Server is not supported.
CPUiMac G4, iMac G5, iBook G4, PowerBook G4, Power Mac G5, eMac, 
Mac mini Series with USB 2.0 port as a standard equipment
PowerPC G4 or above
Memory256 MB or more (512 MB or more recommended)
Hard diskDisk space required for installation: approx. 200 MB
≥1 GB or more space in Startup Disk is required when operating 
application.
≥When creating a disc or disc image, you will need three times as 
much space as the size of the disc itself.
GraphicsMinimum of 1024k768, 32,000 colors (Full color recommended)
≥Will not run correctly with a screen smaller than 1024k768, or with 
less than 256 colors.
OtherPre-installed QuickTime 6 or later
OSMac OS X v10.1 to v10.4
CPUPowerPC G3 (400 MHz or higher), G4, G5
RAM64 MB or more
For technical inquiries about these software applications, contact the PIXELA Customer Support 
Center in your region.
U.S. and Canada (Toll-Free) +1-800-458-4029
Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website is in English only.)
D250&300(P_PC)eng.book  134 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							135LSQT1011
With a computer
Installation (Macintosh)
Installation (Macintosh)
≥Before starting the installation, close any other software applications which are running.
≥Do not perform any other operations on your computer while the software is being installed.
1 Insert the CD-ROM into the computer.
[PANASONIC] CD-ROM icon appears.
2 Double-click [PANASONIC] # [Imx for Panasonic] # [ImageMixer.pkg].
The installer setup screen appears.
3 Click [Continue].
4 Read carefully through the terms and conditions 
shown on the screen for the [Software License 
Agreement], click [Continue] and then click [Agree].
≥You cannot install the application if you click [Disagree]. 
5 Click [Continue].
Continue to follow the on-screen messages to install it.
6 Click [Close].
D250&300(P_PC)eng.book  135 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							136LSQT1011
Installation (Macintosh)
With a computer
For details on how to use the software applications, read the help.
∫Pixe VRF Browser EX
After starting Pixe VRF Browser EX, select [Help] # [Pixe VRF Browser EX Help] from the Menu 
Bar.
∫ImageMixer VCD/DVD2
After starting ImageMixer VCD/DVD2, click the [?] icon at top right of ImageMixer VCD/DVD2 
screen.
Follow the steps below to uninstall any software applications that you no longer require.
Drag the folder in which the software is installed into the Trash and then 
empty the Trash.
≥After uninstalling the software, be sure to reboot the computer.
Reading the operating instructions of the software 
applications
Software application uninstallation
D250&300(P_PC)eng.book  136 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							137LSQT1011
With a computer
Using discs on a computer (Macintosh)
Using discs on a computer (Macintosh)
Using Pixe VRF Browser EX and ImageMixer VCD/DVD2, you can create a DVD-Video disc (DVD-
RW/DVD-R disc) from the images recorded on this unit.
≥Before using DVD-RW (VR format), DVD-RW (Video format) or DVD-R on a computer, finalize 
them on this unit.
≥To create a DVD-Video disc, a separate DVD-RW/DVD-R/+RW/+R drive is required.
≥Before initial use, select the software’s [ReadMe] in the folder in which the software is installed 
and then read through the additional instructions or updated information.
¬Connect this unit to the AC adaptor.
1 Remove the disc from the unit, turn on the unit and then rotate the 
mode dial to select  .
2 Connect this unit and a computer.
≥Do not use any other USB cables except the supplied 
one. (Operation is not guaranteed with any other USB 
cables.)
3(On the computer)
Double-click the [Pixe VRF Browser EX for Panasonic] icon in the 
[ImageMixer for Panasonic] folder you installed.
Pixe VRF Browser EX starts.
4 Click the drive button, select [MATSHITA DVD-RAM 
LMXK1931] from the pop-up menu and then click 
[OK].
The cover of the disc compartment on this unit opens.
Creating a DVD-Video on a computer from a recorded disc
AUSB cable (supplied)
≥Insert the plugs as far as they will go. The unit 
and computer will not operate properly if the 
plugs are not inserted fully.
A
D250&300(P_PC)eng.book  137 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							138LSQT1011
Using discs on a computer (Macintosh)
With a computer
5 Insert the disc in this unit.
The contents recorded on the disc are displayed.
6 Click the desired program (A), select the scene to 
be added to the DVD-Video (B) and then click the 
[Save] button (C).
7 Select the destination folder to save, select [Default] 
in [Format] and then click the [Save] button.
≥When saving is complete, select [Pixe VRF Browser EX] # [Quit Pixe 
VRF Browser EX] from the Menu Bar to exit Pixe VRF Browser EX.
≥The disc cover on this unit opens. You can remove the disc and 
disconnect the USB cable.
8 Prepare a DVD-RW/DVD-R/rRW/rR drive that can be written to.
≥Check that a disc is not inserted in the drive. 
9 Double-click the [ImageMixerVCDDVD2] icon in the [ImageMixer for 
Panasonic] folder you installed.
ImageMixer VCD/DVD2 starts.
10 Click the [DVD-Video] button.
11 Use [Select folder] to select the folder containing the 
MPEG files saved with Pixe VRF Browser EX and 
then click the [Add] button.
≥Repeat this to add multiple folders.
B
C
A
D250&300(P_PC)eng.book  138 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							139LSQT1011
With a computer
Using discs on a computer (Macintosh)
12 Click [Create Menu] (A) and edit the DVD menu as 
required, then click [Write to Disc] (B).
13 Check [Create disc] (A), select the drive to be 
used (B) and then click [Write] (C).
14 Insert a brand-new 12 cm (5z) DVD-RW or DVD-R disc into 
the disc drive and click [OK].
≥12 cm (5z) iRW and iR discs can also be used if the disc drive supports them.
15 Proceed with the write setting and then click [OK].
Writing to the disc starts.
≥Depending on the amount of data, writing to the disc may take time.
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (lbelow).
≥When the unit is connected to a computer in disc 
playback mode, no image will appear on the LCD 
monitor or viewfinder.
≥When this unit is connected to a computer, you 
cannot use this unit’s DISC EJECT lever to remove 
a disc. Use the software’s eject button to eject the 
disc.≥When a computer is accessing a disc in this unit, 
the ACCESS/PC lamp lights. Do not disconnect the 
USB cable or AC adaptor while the disc is being 
accessed as it may damage the data.
When the drive icon is displayed on the desktop:
Drag the icon into the Trash and then disconnect the USB cable.
When the drive icon is not displayed on the desktop:
Exit the application and then disconnect the USB cable.
≥If you disconnect the USB cable while the access 
lamp is on, it may damage the data.
AB
A
B
C
To disconnect USB cable safely
D250&300(P_PC)eng.book  139 ページ  ２００６年１月２０日　金曜日　午後２時３分 
						

							140LSQT1011
Using an SD card on a computer (Macintosh)
With a computer
Using an SD card on a computer (Macintosh)
¬Connect this unit to the AC adaptor.
¬Insert an SD card with recorded images in the unit, turn on the unit and then 
rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] 
# [ USB FUNCTION] # [PC CONNECT] and 
press the joystick.
≥Press the MENU button to exit the menu screen.
2 Connect this unit and a computer.
 icon appears.
≥Do not use any other USB cables except the supplied 
one. (Operation is not guaranteed with any other USB 
cables.)
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (l141).≥When a computer is accessing a card in this unit, 
the card access lamp lights. ( appears on the 
LCD monitor.) Do not disconnect the USB cable or 
AC adaptor while the card is being accessed as it 
may damage the data.
Connection
AUSB cable (supplied)
≥Insert the plugs as far as they will go. The unit 
and computer will not operate properly if the 
plugs are not inserted fully.
A
D250&300(P_PC)eng.book  140 ページ  ２００６年１月２０日　金曜日　午後２時３分