Panasonic Vdr D105 Operating Instructions Manual
Have a look at the manual Panasonic Vdr D105 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66LSQT1040
Editing
Using playlists
Two scenes can be combined into one.
≥Combining scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and
press the joystick.
2 Select the playlist to be edited, then press the
joystick.
3 Select [ COMBINE], then press the joystick.
4 Select the scene to be combined, then press the
joystick.
≥The selected scene and the next scene are combined.
5 When the confirmation...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-65.png "Page 66
66LSQT1040
Editing
Using playlists
Two scenes can be combined into one.
≥Combining scenes on a playlist will not affect the original scenes.
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and
press the joystick.
2 Select the playlist to be edited, then press the
joystick.
3 Select [ COMBINE], then press the joystick.
4 Select the scene to be combined, then press the
joystick.
≥The selected scene and the next scene are combined.
5 When the confirmation...")
![Page 67
67LSQT1040
Editing
Using playlists
≥Deleting scenes on a playlist will not affect the original scenes.
Deleting scenes one at a time:
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the button during playback.
2 When the confirmation message appears, select [YES], then press the
joystick.
Deleting multiple scenes from the thumbnail display:
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and
press the joystick.
2 Select the playlist to be...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-66.png "Page 67
67LSQT1040
Editing
Using playlists
≥Deleting scenes on a playlist will not affect the original scenes.
Deleting scenes one at a time:
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the button during playback.
2 When the confirmation message appears, select [YES], then press the
joystick.
Deleting multiple scenes from the thumbnail display:
¬Select playlist playback mode. (l62, steps 1 and 2)
1 Press the MENU button, then select [ EDIT] and
press the joystick.
2 Select the playlist to be...")
![Page 68
68LSQT1040
Editing
Using playlists
5
(Only when [SELECT] is selected in step 3)
Press the button.
6 When the confirmation message appears, select [YES], then press the
joystick.
(Only when [SELECT] is selected in step 3)
To continue deleting other scenes
Repeat steps 4-6.
To complete editing
Press the MENU button.
≥Deleting scenes on a playlist will not increase the
remaining capacity for recording.
≥The playlist itself is deleted if you delete all the
scenes in it.≥When a playlist is deleted, the...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-67.png "Page 68
68LSQT1040
Editing
Using playlists
5
(Only when [SELECT] is selected in step 3)
Press the button.
6 When the confirmation message appears, select [YES], then press the
joystick.
(Only when [SELECT] is selected in step 3)
To continue deleting other scenes
Repeat steps 4-6.
To complete editing
Press the MENU button.
≥Deleting scenes on a playlist will not increase the
remaining capacity for recording.
≥The playlist itself is deleted if you delete all the
scenes in it.≥When a playlist is deleted, the...")
![Page 69
69LSQT1040
Disc management
Formatting discs
Disc management
Formatting discs
(RAM) (-RW‹VR›) (-RW‹V›)
This is for initializing discs.
≥Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[FORMATDISC] # [YES] and press the joystick.
≥When formatting a DVD-RAM, skip to step 3.
2(When formatting a DVD-RW only)
Select format type (l19), then press the joystick.
3 When the...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-68.png "Page 69
69LSQT1040
Disc management
Formatting discs
Disc management
Formatting discs
(RAM) (-RW‹VR›) (-RW‹V›)
This is for initializing discs.
≥Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[FORMATDISC] # [YES] and press the joystick.
≥When formatting a DVD-RAM, skip to step 3.
2(When formatting a DVD-RW only)
Select format type (l19), then press the joystick.
3 When the...")
![Page 70
70LSQT1040
Disc management
Finalizing a disc
Finalizing a disc
(-RW‹VR›) (-RW‹V›) (-R)
To play back a DVD-RW (Video format) or a DVD-R on other devices e.g. a DVD player, finalize the
disc.
¬Connect this unit to the AC adaptor. (Finalization cannot be executed using a battery.)
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ FINALIZE] # [YES] and press the joystick.
≥When finalizing a DVD-RW (VR format), skip to step 3.
2[When finalizing a DVD-RW (Video format) or...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-69.png "Page 70
70LSQT1040
Disc management
Finalizing a disc
Finalizing a disc
(-RW‹VR›) (-RW‹V›) (-R)
To play back a DVD-RW (Video format) or a DVD-R on other devices e.g. a DVD player, finalize the
disc.
¬Connect this unit to the AC adaptor. (Finalization cannot be executed using a battery.)
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ FINALIZE] # [YES] and press the joystick.
≥When finalizing a DVD-RW (VR format), skip to step 3.
2[When finalizing a DVD-RW (Video format) or...")
![Page 71
71LSQT1040
Disc management
Finalizing a disc
(-RW‹V›)
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ UN-FINALIZE] # [YES] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
≥When un-finalizing is complete, press the MENU button to exit the message screen.
≥When you un-finalize the disc, use a battery with
sufficient battery power or the AC adaptor.
≥DVD-RW (VR format) cannot be un-finalized. DVD-
RW (VR format)...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-70.png "Page 71
71LSQT1040
Disc management
Finalizing a disc
(-RW‹V›)
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ UN-FINALIZE] # [YES] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
≥When un-finalizing is complete, press the MENU button to exit the message screen.
≥When you un-finalize the disc, use a battery with
sufficient battery power or the AC adaptor.
≥DVD-RW (VR format) cannot be un-finalized. DVD-
RW (VR format)...")
![Page 72
72LSQT1040
Disc management
Protecting a disc
Protecting a disc
(RAM) (-RW‹VR›)
This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
To release disc protection
1) Press the MENU...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-71.png "Page 72
72LSQT1040
Disc management
Protecting a disc
Protecting a disc
(RAM) (-RW‹VR›)
This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
To release disc protection
1) Press the MENU...")
![Page 73
73LSQT1040
Disc management
Displaying disc information
Displaying disc information
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded scenes, the remaining space and whether or not the
disc is finalized or protected is displayed.
¬Rotate the mode dial to select .
Press the MENU button, then select [ SETUP] #
[INFORMATION] # [YES] and press the joystick.
To exit the information screen
Press the MENU button.
D105(P)eng.book 73 ページ ２００６年１月１６日 月曜日 午後４時１分](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-72.png "Page 73
73LSQT1040
Disc management
Displaying disc information
Displaying disc information
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded scenes, the remaining space and whether or not the
disc is finalized or protected is displayed.
¬Rotate the mode dial to select .
Press the MENU button, then select [ SETUP] #
[INFORMATION] # [YES] and press the joystick.
To exit the information screen
Press the MENU button.
D105(P)eng.book 73 ページ ２００６年１月１６日 月曜日 午後４時１分")
![Page 76
76LSQT1040
With other products
With a DVD recorder/player
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard
disk.
≥If you want to record (dub) a disc that the DVD recorder is not compatible with, connect this unit
and the DVD recorder with the AV/S cable and then record (dub) the disc.
(l77)
1[When copying (dubbing) a DVD-RW (Video format) or DVD-R]
Finalize the disc on this unit. (l70)
2 Insert the disc in the DVD recorder,...](http://img.usermanuals.tech/thumb/58/66051/w64_vdr-d105_mul_om_d-75.png "Page 76
76LSQT1040
With other products
With a DVD recorder/player
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard
disk.
≥If you want to record (dub) a disc that the DVD recorder is not compatible with, connect this unit
and the DVD recorder with the AV/S cable and then record (dub) the disc.
(l77)
1[When copying (dubbing) a DVD-RW (Video format) or DVD-R]
Finalize the disc on this unit. (l70)
2 Insert the disc in the DVD recorder,...")
71LSQT1040 Disc management Finalizing a disc (-RW‹V›) ¬Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ UN-FINALIZE] # [YES] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick. ≥When un-finalizing is complete, press the MENU button to exit the message screen. ≥When you un-finalize the disc, use a battery with sufficient battery power or the AC adaptor. ≥DVD-RW (VR format) cannot be un-finalized. DVD- RW (VR format) after finalization can be recorded and edited in the same way as DVD-RW (VR format) before finalization.≥DVD-R cannot be un-finalized. Un-finalizing a DVD-RW This is for un-finalizing a DVD-RW (Video format) so that it can be used for recording. D105(P)eng.book 71 ページ ２００６年１月１６日 月曜日 午後４時１分
72LSQT1040 Disc management Protecting a disc Protecting a disc (RAM) (-RW‹VR›) This is for preventing recorded contents from being deleted or edited by mistake. Further recording and editing is not possible on protected discs until the protection is released. ¬Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ DISC PROTECT] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick. To release disc protection 1) Press the MENU button, then select [ SETUP] # [ DISC PROTECT] and press the joystick. 2) When the confirmation message appears, select [YES], then press the joystick. ≥If the disc has been protected on another device, it may not be possible to release the protection on this unit. In this case, release the protection on the device that you used to protect it. D105(P)eng.book 72 ページ ２００６年１月１６日 月曜日 午後４時１分
73LSQT1040 Disc management Displaying disc information Displaying disc information (RAM) (-RW‹VR›) (-RW‹V›) (-R) Information such as the number of recorded scenes, the remaining space and whether or not the disc is finalized or protected is displayed. ¬Rotate the mode dial to select . Press the MENU button, then select [ SETUP] # [INFORMATION] # [YES] and press the joystick. To exit the information screen Press the MENU button. D105(P)eng.book 73 ページ ２００６年１月１６日 月曜日 午後４時１分
74LSQT1040 With other products With a TV With other products With a TV (RAM) (-RW‹VR›) (-RW‹V›) (-R) Images recorded by this unit can be played back on a TV. ≥Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV. * If the TV has an S Video terminal, also connect the S Video plug to it. This allows you to enjoy more beautiful pictures. 2 Turn on this unit, then rotate the mode dial to select . 3 Change the input channel on the TV. Example: Set the channel to “VCR2”, etc. (The channel set will differ depending on the terminal to which the unit is connected.) 4 Start playback on this unit. The image and audio are output on the TV. ∫If the image or audio from this unit is not output on the TV ≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal. ≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) Playback on TV AAV/S cable (supplied) ≥Insert the plugs as far as they will go. VIDEO IN S VIDEO IN * AUDIO IN A D105(P)eng.book 74 ページ ２００６年１月１６日 月曜日 午後４時１分
75LSQT1040 With other products With a DVD recorder/player With a DVD recorder/player ≥When playing back a disc on a DVD recorder/player, place the device so that the disc lies flat. (RAM) (-RW‹VR›) Insert the disc in the DVD recorder/player, then play it back. ≥Playback is only possible on devices that support 8cm (3z) DVD-RAM or DVD-RW (VR format). See the operating instructions for DVD recorder/player.≥DVD-RW (VR format) may have to be finalized. In this case, finalize the disc on this unit. (l70) ≥You cannot record images that allow “One time only recording” on a 8 cm (3z) disc. (-RW‹V›) (-R) 1 Finalize the disc on this unit. (l70) 2 Insert the disc in the DVD recorder/player, then play it back. ≥Do not insert a disc that has not been finalized into a DVD recorder/player: the disc may be unusable. Also, a message asking you to format the disc may appear on the DVD recorder. Do not format the disc.≥Playback is possible on devices that support 8 cm (3z) DVD-Video, but playback on all DVD players is not guaranteed. Playback on DVD recorder/player Playing back a DVD-RAM or a DVD-RW (VR format) Playing back a DVD-RW (Video format) or a DVD-R D105(P)eng.book 75 ページ ２００６年１月１６日 月曜日 午後４時１分
76LSQT1040 With other products With a DVD recorder/player (RAM) (-RW‹VR›) (-RW‹V›) (-R) If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard disk. ≥If you want to record (dub) a disc that the DVD recorder is not compatible with, connect this unit and the DVD recorder with the AV/S cable and then record (dub) the disc. (l77) 1[When copying (dubbing) a DVD-RW (Video format) or DVD-R] Finalize the disc on this unit. (l70) 2 Insert the disc in the DVD recorder, then copy (dub) the contents onto the hard disk. ≥For details on how to copy (dub) the images onto the hard disk, refer to the operating instructions of the DVD recorder. ≥DVD-RW (VR format) may have to be finalized. In this case, finalize the disc on this unit. (l70) ≥Do not insert a DVD-RW (Video format) or DVD-R that has not been finalized into a DVD recorder: the disc may be unusable. Also, a message asking you to format the disc may appear on the DVD recorder. Do not format the disc.≥You cannot record images that allow “One time only recording” on a 8 cm (3z) disc. Copying recordings onto a DVD recorder’s hard disk D105(P)eng.book 76 ページ ２００６年１月１６日 月曜日 午後４時１分
77LSQT1040 With other products With a VCR With a VCR (RAM) (-RW‹VR›) (-RW‹V›) (-R) You can record (dub) images played back on this unit onto other video devices. You can create a playlist by gathering the scenes you want to record (dub), then record (dub) the scenes in this playlist only to other devices. (l61) ≥Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device. * If the video device has an S Video terminal, also connect the S Video plug into it. This allows you to enjoy more beautiful pictures. 2 Turn on this unit, then rotate the mode dial to select . 3 Change the input channel on the video device and TV. Example: Set the channel to “LINE1”, etc. on the video device. (The channel set will differ depending on the terminal to which the unit is connected.) 4 Start playback on this unit. Then start recording on the connected device. ≥See the operating instructions of the video device for details. To stop recording (dubbing) Stop recording on the connected device. Then stop playback on this unit. Recording (dubbing) images onto other video devices AAV/S cable (supplied) ≥Insert the plugs as far as they will go. A VIDEO IN S VIDEO IN * AUDIO IN D105(P)eng.book 77 ページ ２００６年１月１６日 月曜日 午後４時１分
78LSQT1040 Menus Others Others Menus Motion picture recording menus ∫[ BASIC] [ SCENE MODE] (l47) [WINDCUT] (l44) [ REC MODE] (l37) [ CINEMA] (l44) [CLOCKSET] (l33) ∫[ ADVANCED] [ D.ZOOM] (l38) [EIS] (l45) [ MAGICPIX] (l45) [FADECOLOR] (l42) [ ZOOM MIC] (l39) ∫[SETUP] [DISPLAY] (l79) [ DATE/TIME] (l33) [ DATE FORMAT] (l33) [ POWER SAVE] (l79) [ BEEP SOUND] (l79) [LCDSET] (l34) [EVFSET] (l34) [ INITIAL SET] (l79) [ DEMO MODE] (l79) ∫[ LANGUAGE] (l30) Motion picture playback menus ∫[ DELETE] (Only when [PLAY MODE] is set to [VIEW ALL] or [BY DATE]) [ SELECT] (l56) [ ALL] (l56) ∫[PLAYSETUP] [ PLAY MODE] (l55, 61, 62) [RESUMEPLAY] (l55) ∫[ EDIT SCENE] (Only when [PLAY MODE] is set to [VIEW ALL] or [BY DATE]) [ DIVIDE] (l58) [ COMBINE] (l59) ∫[EDIT] (Only when [PLAY MODE] is set to [PLAYLIST]) [ ADD] (l63) [ MOVE] (l64) [ DIVIDE] (l65) [ COMBINE] (l66) [ DELETE] (l67) ∫[ SETUP] [ FORMAT DISC] (l69) [ FINALIZE] (l70) [ UN-FINALIZE] (l71) [ DISC PROTECT] (l72) [ INFORMATION] (l73) [DISPLAY] (l79) [DATE] (l33) [DATEFORMAT] (l33) [ POWER SAVE] (l79) [BEEPSOUND] (l79) [ LCD SET] (l34) [EVFSET] (l34) ∫[ LANGUAGE] (l30) Menu list EIS EVF DEMO EVF D105(P)eng.book 78 ページ ２００６年１月１６日 月曜日 午後４時１分
79LSQT1040 Menus Others ∫[DISPLAY] ≥ OFF≥ ON The screen indications are selected as shown in the illustration below. ∫[ BEEP SOUND] ≥ OFF≥ ON This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 1 Beep When you start recording When you turn on the power 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l82)∫[ POWER SAVE] ≥ OFF≥ 5 MINUTES [OFF]:The power saving function is not activated. [5 MINUTES]: When about 5 minutes passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again. ≥When using the AC adaptor, the unit will not turn off even if you set this to [5 MINUTES]. ∫[ INITIAL SET] ≥ YES≥ NO When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition. (Language setting cannot be back to the initial shipping condition.) ∫[ DEMO MODE] ≥ OFF≥ ON This item is used to start the unit demonstration. (Only when using the AC adaptor and the mode dial is at the position) If you set this to [ON] without inserting a disc, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert a disc, or set this to [OFF]. For normal use, set this function to [OFF]. Setup menu OFF ON; 3:30 PM 12.15.2006 ;R 0h00m0h00m00s 3:30 PM 12.15.2006 EISSP DEMO D105(P)eng.book 79 ページ ２００６年１月１６日 月曜日 午後４時１分
80LSQT1040 Indications Others Indications ∫Recording indications Indications ;R 0h00m0h00m00s 3:30 PM 12.15.2006 50×EIS AWB1/100OPEN 3dB SP Remaining battery power R 0h00mRemaining time for recording 0h00m00sElapsed recording time 3:30 PM 12.15.2006Date/Time indication ¥/; (Red)Recording ; (Green)Recording pause Digital zoom Auto mode Manual mode MFManual focus 2tZoom magnification indication ªBack light mode Image stabilizer 1/100Shutter speed OPEN, F2.0F number 0dBGain value Soft skin mode Fade (White) Fade (Black) MagicPix function Video light Zoom microphone Wind noise reduction , , Motion picture recording mode AUTO MNL EIS ZOOM XPSPLP 5Sports mode Portrait mode Low light mode Spotlight mode Surf & snow mode Auto white balance Indoor mode (recording under incandescent lamp) Outdoor mode Manual adjustment mode Disc type DVD-RAM DVD-RW (VR format) DVD-RW (Video format) DVD-RW (unformatted) DVD-R AWB D105(P)eng.book 80 ページ ２００６年１月１６日 月曜日 午後４時１分