Panasonic UF 8100 YC User Manual

31
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
SLOT 1. The Firmware (3) and (4) are assigned as ROM Code (C).
When using SD Memory Card (32 MB to 512 MB), the 8 MB Program (C) can be written onto one 
card.
C. 2nd G3 PC Board Firmware
The 4 MB Program Memory (F-ROM) is integrated on the 2nd G3 PCB. The Programs for 2nd 
Super G3 communication protocol Control is saved on the Board. The Firmware is transferred as 
Serial Data from the SC PCB.
D. Firmware Updating Ports
Three (3) types of Ports are...

32
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.5.2. Updating through a LAN Port (The Quick and Easy Method)
The firmware code can be easily updated when the main unit is connected to a LAN. 
The Network Firmware Update Tool can also be used by connecting to the machine using a crossover 
cable, if the unit is not connected to a LAN.
1) Install the Network Firmware Update Tool to your PC
The option CD-ROM includes the Network Firmware Update Tool and the Main Unit Firmware Code. 
Please refer to the...

33
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
Note:
1. Manual mode must be used, when updating the designated version of the firmware or changing 
the type of the firmware. 
Please refer to the Section 2.2, Setting up the Network Firmware Update Tool, File Selection 
Ta b of the Operating Instructions.
2. While updating the firmware code, the display may become garbled, however, it will return to 
normal upon completion of the firmware update.
3. If the firmware update fails and the unit does not...

34
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4) Upgrading the Main Units Firmware Code
Start the Local Firmware Update Tool and select the following Firmware Code Parent File Folder in 
the C:\Panasonic\Panasonic-FUP\Data folder, and select the Firmware Code Type then follow the 
display instructions to upgrade the Main Units Firmware Codes. 
You must process each firmware file separately in this manner and sequence.
Note:
1. While updating the firmware code, the display may become garbled,...

35
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
11. Remove the Master Firmware SD Memory Card from the machine.
12. Reconnect the Telephone Line, LAN and/or USB Cables.
13. Turn the Power Switch on the back of the machine to the ON position.
14. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1 above if the settings are 
other than factory default.
2) When a DATA SD Card is installed
1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
2. Turn the...

36
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
3) Preparing the Master Firmware SD Memory Card
1. Insert the SD Memory Card (32 MB to 512 MB) into the SD Memory Card Slot.
2. Perform the SD Memory Card Firmware Writing Tool.
3. After all firmware codes are copied, remove the SD Memory Card from the Slot.
The SD Memory Card is now ready to use for firmware update.
(Refer to the Local Firmware Update Tool OI on the CD and the SD Memory Card Firmware Writing 
Tool OI.)
2.5.6. Formatting the SD Memory...

37
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
12. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
13. Turn the Power Switch on the back of the machine to the OFF position.
14. Reconnect the Telephone Line, LAN and/or USB Cables.
15. Turn the Power Switch on the back of the machine to the ON position.
Note:
Repeat steps 6 to 10 to continue formatting other SD Card(s).
2.5.7. Firmware Emergency Recovery
The easiest method to recover the firmware in an Emergency...

38
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2nd G3 :            UF-8K  G3B  A A Vxxxxx  YC
Firmware Version (V1xxxx)
AA: Fixed
2nd G3
Model Number
YC: Fixed
Downloaded From ManualsPrinter.com Manuals 

39
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.6. Adjusting the Printer Registration, LSU Image Side to Side
When installing the Paper Tray option, the following LSU Image Side to Side adjustment may be required.
The Printer registration is adjusted at the factory. 
If copy image is abnormal, especially in the Rotation Copy mode, adjust it by the following procedure.
2.6.1. Printer Registration 
1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper...

40
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.6.3. LSU Image Side to Side Adjustment for the ADU
1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper 
size. Empty all the remaining trays (including the bypass tray) to disable them.
2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
3. Perform the Service Mode F1-06 (Print Test Pattern 4).
4. Check the gap of the print pattern from the paper edge, refer to the...