Panasonic UF 8100 YC User Manual

51
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
582 XMT B Sub-address SEP (for Polling) 
transmission to a unit that has their 
DIS bit 47 (NSF bit 130) OFF.Sub-address transmission to a unit that 
has no Sub-address function.
601 XMT ADF Door was opened during ADF  
transmission.
623 XMT A No original was in the ADF. (Built-
in dialer engaged)Operator removed the original from the 
ADF after dialing was completed.
Original was not set properly in the ADF.
630 XMT or RCV
(Polling)B Redial count over....

52
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
718 XMT LAN Page Memory Overflow occurred 
while receiving printing data.   The 
paper size selected within your 
application to print is larger than 
the paper size loaded in the 
Tray(s).Check the document size and 
resolution.
Ask originator to re-send in a supported 
size and resolution.
719 RCV LAN Received data via LAN is in a 
format that is not supported.Ask the originator to re-send with a 
supported file attachment:
* In a TIFF-F format.
*...

53
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
Note:
When 2nd G3 option is installed, check FXB PCB or G3B PCB. 814 Conf. XMT 
Conf. Polling 
Relay 
Comm.PSTN The remote station does not have 
Relay XMT nor Confidential 
Communication capability.
815 Conf. RCV PSTN Mailbox full.
816 Conf.  Polled PSTN The received Polling Password did 
not match.
825 Conf. RCV
Conf. PolledPSTN Parameter settings of the remote 
station are not properly set.
870 MEM XMT 
MEM RCV PSTN
LANMemory overflow occurred while...

54
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4 Service Modes
4.1. Service Modes (For Copier)
These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a 
means of making adjustments to the Input/Output of major components.
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in 
compliance with the local telecommunication regulations/standards, and do not need to be changed. 
Changing some of these...

55
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
F9 Unit Maintenance Fax Service Mode
Service Alert Tel #
Firmware Version
Print Device Info. Service Modes (For Copier)
Service 
ModeItem Function
Downloaded From ManualsPrinter.com Manuals 

56
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
F5 / F6 Information List (Sample)
**********-F5/F6 INFORMATION LIST-****** DATE MMM-dd-yyyy *** TIME12:01 *** P.01
F5-00 . . . . .      F5-50 Auto contrast adj. Yes 
F5-01 Frequency desired 60Hz  F5-51 Dept. Counter (COPY) No
F5-02 . . . . . F5-52 Dept. Counter (FAX) No
F5-03 . . . . . F5-53 2-sided auto shift No
F5-04 LSU off timer  5 Sec. F5-54 . . . . .
F5-05 . . . . . F5-55 . . . . .
F5-06 . . . . . F5-56 . . . . .
F5-07 . . . . . F5-57 . . . . ....

57
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
  2.FIRMWARE VERSION
      SC : BAT208xxAU  1.MACHINE INFORMATION
      MACHINE NAME : UF-8000
      MAC ADDRESS : 08002301D3E5
      SERIAL NUMBER : 
      SC BOOT : V803
      PNL : V010018
      SCANNER(SDR) : V00000
      PRINTER : V00029 
      FAX MODEM : Ver 0801
      G3B BOARD : 
      PDL FONT1 : CAV00000b
      SC2 : CAT120810aAU
  3.MEMORY CAPACITY
      PAGE MEMORY : 32 MB
      SORT MEMORY : 16 MB
      FAX MEMRY : 12 MB
  
  4.OPTION...

58
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
F7 Total Counter List (Sample)
F7-01 Key Operator ID Code : 000 
F7-02 Total Count : 295
F7-03 PM Count : 295
F7-04 Scanner PM Count :  61
F7-05 . . . . . :  
F7-06 OPC Drum Count : 295
F7-07 Process Unit Count  : 295
F7-08 ADF PM Count :    50
F7-09 . . . . . :
F7-10 . . . . . :
F7-11 Sheet Bypass Count : 147
F7-12 1st Paper Tray Count :  90
F7-13 2nd Paper Tray Count :   0
F7-14 . . . . . :
F7-15 . . . . . :
F7-16 2-Sided Count :  28
F7-29 . . . . . :...

59
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.3. F4 Mode: Input/Output Status Test
Set the machine to service mode and press 4 key on the Keypad.
↓
Press the START key.
↓
Select “1:Check Input“ or “2:Check Output“ to activate the test then press START key.
↓
Press STOP key to cancel the test.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
1. Check Input 
2. Check Output 
Press the START...

60
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
175 ADF Stamp Solenoid When the ADF PCB CN25-2 signal 
level changes to 0V from +24V, 
Solenoid operates for 1 second. F4 Mode (Check Output)
No. Item Function Remark
Downloaded From ManualsPrinter.com Manuals