Panasonic Tv Dvd Ram Vcr Combination Pv Dr2714 Operating Instructions

							61
Disc Operation
PlaySUB MENUSelect
PLAY LIST  Play List ViewDVD-RAM- -
- -- -- -
- -
Create
PreviousNext 01/01
07
10/27 Mon  0:30
PLAY LIST  CreateDVD-RAM
Press RETURN to exit.08 8 10/27 MonSource Title 01/01
001/001 Chapters in PLAY LIST
- - -- - -
- -
- - -
- -
- - -
0201
001/001 Source Chapter001002- - -003
Playing play lists
4  Press SUB MENU, then 
x
z to select the operation 
and press ENTER.
•  If you select “Edit”, press 
x
z to select the operation and press 
ENTER.
Create
Copy
Enter Name
Change Thumbnail
Erase
Properties
Edit
Chapter View
„ Multiple  editing
Select with 
x
z
{
y and press PAUSE. (Repeat.)
A check mark appears. Press PAUSE again to cancel.
DVD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION  OFF
CARTRIDGE PROTECTION  OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
FLEXIBLE RECORDING
SETUPPLAY LIST
DISC SETTING
Preparation:•  Create play lists first. (p. 60)
1  Press ACTION to display MAIN MENU and select 
“DVD” then press ENTER. (P.41)
2 Press 
x
z
{
y to select “PLAY LIST” and press 
ENTER.
„ To stop partway through
Press RETURN.
„ To clear the play list screen
Press RETURN.
6 Press 
{
y to select the position to insert the 
chapter and press ENTER.
•  Repeat steps 5~6 to add other chapters.
• Press 
x to select other source titles.
7 Press RETURN.
3 Press 
x
z
{
y to select the play list and press 
ENTER.
•  You can also select a playlist from the chapter view by entering a 
2-digit number with the numeric buttons.
e.g., 5:   [0] 
: [5]
 15: [1] 
: [5]
•  Whenever a number greater than the total number of play lists is 
entered, Create is selected.
„ To show other pages
Press
x
z
{
y to select “Previous” or “Next” and press ENTER.
• You can also press SKIP 
y
y
ÿ or SKIP 
ÿ
{
{ to show other 
pages.
„ To stop play list play
Press STOP. (The play list appears.)
„ To erase a play list during play (p. 62)
Press ERASE.
Press
{
y to select “Erase” and press ENTER.
Using play list to edit play list/chapters
•  You can use fast-forward, rewind, pause, and slow-motion while playing 
chapters just as you can during normal play.
Refer to 
“Play list 
operations”.
„ If you select “Chapter View”
5 Press 
x
z
{
y to select the chapter.•  You can also select a chapter by entering a 3-digit number with the 
numeric buttons.
DVD-RAM
PlaySUB MENUSelect
PLAY LIST  Chapter View
PreviousNext
- - -- - -- - -- - -
- - -- - -- - -- - -
- - -- - -
01/01
00108 10/27 Mon 0:30002
„ To play a chapter
Press ENTER.
„ To stop chapter play
Press STOP. (The chapter view appears.)
„ To erase a chapter during play
Press ERASE.
Press
{
y to select “Erase” and press ENTER.
•  To show other pages/Multiple editing (see above)
(Continued on next page.)
• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 
the unit or the disc.
e.g., 5:  [0] 
: [0] 
: [5]
 15: [0] 
: [1] 
: [5]
 115: [1] 
: [1] 
: [5]
•  If you enter a number larger 
than the total number of 
chapters, the last chapter is 
selected. 
						

							62For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
DVD-RAMPLAY LIST  Move Chapter
PreviousNext
- - -- - -- - -- - -
- - -- - -- - -- - -
- - -- - -
01/01
00108 10/27 Mon 0:30002
„ To exit the screen
Press RETURN several times.
„ To return to the previous screen
Press RETURN.
6  Press SUB MENU, then 
x
z to select the operation 
and press ENTER.
Refer to “Chapter 
operations”.
You can go back to PLAY LIST View.
Add Chapter
Move Chapter
Divide Chapter
Combine Chapters
Erase Chapter
Play List View
• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 
the unit or the disc.
PLAY LIST  Play List ViewDVD-RAM- -
- -- -- -
- -
Create
PreviousNext 01/01
07
10/27 Mon  0:30
Erase
EraseCancel Erase Play List?
PLAY LIST  Play List ViewDVD-RAM- -
- -- -- -
- -
Create
PreviousNext 01/01
10/27 Mon  0:30
07
DinosaurPropertiesNo. 01
Chapters 001Date 6/23/2004 Wed
Time 2:26.40
PLAY LIST  Play List ViewDVD-RAM- -
- -- -- -
- -
Create
PreviousNext 01/01
07
10/27 Mon  0:30
Copy
CopyCancel Copy this Play List?
Play list operations
1  Do Steps 1~5 on page 61.
RAM(Multiple editing is possible. (p. 61))
Erase
2 Press 
{
y to select “Erase” and press ENTER.•  The play list is erased.
•  Once a play list has been erased, it is irretrievable. Check carefully 
before proceeding.
Properties
Play list information (e.g., time and date) is shown.
RAM
Edit
: Create
Refer to “Creating play lists” on pages 60-61.
RAM
2 Press 
{
y to select “Copy” and press ENTER.
Edit
: Copy
RAM(Multiple editing is possible. (p. 61))
Edit
: Enter Name
Refer to “Entering text” on page 66.
RAM
Note:•  The full name is shown in the “Properties” screen, but if you enter a long 
name, only part of it is shown in the play list screen.
Edit
: Change Thumbnail
Refer to “Change Thumbnail” on page 59.
RAM
Chapter operations
Add Chapter
Refer to “Creating Play lists”, Step 4-7 on pages 60-61.
1  Do Steps 1-6 on pages 61-62.
RAM
2 Press 
x
z
{
y to select the position to insert the 
chapter and press ENTER.
•  The chapter is moved and inserted before the highlighted chapter.
Move Chapter
RAM
Divide Chapter
Combine Chapters
Erase Chapter
RAM
RAM
RAM(Multiple editing is possible. (p. 61)) Refer to “Divide Chapter“ on page 59.
Refer to “Combine Chapters“ on page 59.
Refer to “Erase Chapter“ on page 59. 
						

							63
Disc Operation
DVD
Play back
DISC PROTECTION  OCARTRIDGE PROTEC
DOCUMENTARY
DVD-RAM
DIRECT NAVIGATOR
DVD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION  OFF
CARTRIDGE PROTECTION  OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
FLEXIBLE RECORDING
SETUPPLAY LIST
DISC SETTING
Disc Setting
e.g., DVD-RAM
e.g., DVD-RAM DVD
ENTER
RETURN 
x
z
{
yACTIONDISC SETTING
Disc Name
Disc Protection
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-RAM
On
1  Press ACTION to display MAIN MENU and select 
“DVD” then press ENTER. (P.41)
2 Press 
x
z
{
y to select “DISC SETTING” and press 
ENTER.
Preparation•  Press DVD to select the drive.
•  Release protection before proceeding:
-  Cartridge (p. 7) 
RAM
-  Disc (p. 63) RAM
DVD-RRAM
3 Press 
x
z to select the operation and press ENTER.•  After this operation, follow the desired operation.
„ To stop partway
Press RETURN.
Disc Name
4 Press 
x
z to select “Disc Name” and press ENTER 
in Step 3 above.
5  Refer to “Entering text” on page 66.•  The disc name is displayed in the DVD Functions window.
Disc Protection
This allows you to protect discs from accidental erasure.
The lock symbol “”appears closed when 
the disc is write-protected.
4 Press 
x
z to select “Disc Protection” and press 
ENTER in Step 3 above.
5 Press 
{
y to select “Yes” and press ENTER.
DVD-RRAM
RAM
DISC SETTING
Disc Name
Disc Protection
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-RAM
On
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-RAM
On
Disc Protection
YesNo Set up Disc Protection.
Disc Setting Procedure 
						

							64For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Format Disc
(Refer to “Formatting” on page 74.).
Notes:
•  Formatting erases all contents on the disc, including computer data. 
Check carefully before proceeding.
•  Some DVD-RAM are unformatted. Format them before using them in this 
unit. Formatting also allows you to erase the entire contents of a disc.
„ To stop formatting
Press RETURN.
1 Press 
x
z to select “Disc Format” and press 
ENTER.
2 Press 
{
y to select “Yes” and press ENTER.
3 Press 
{
y to select “Start” and press ENTER.
4 Press ENTER.
e.g., DVD-RAM
e.g., DVD-RAMDISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-RAM
On
Format disc
YesNo Formatting the disc will erase all contents.
This will take approximately 1 minute.
Are you sure you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-RAM
On
Format disc
StartCancel All contents of this disc will be
completely erased.
Do you want to continue?
Select First play
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-R
On
Select First play
Top Menu
Title 1
RAM
•  A message appears when formatting is finished.
Notes:•Do not turn the unit off or disconnect the AC power supply cord 
while the message “Formatting the disc” is on the TV. This can 
render the disc unusable. (This can take up to max. 70 minutes 
(DVD-RAM). If it takes more than 2 minutes, you can cancel formatting by 
pressing RETURN. The disc must be reformatted if you do this.)
•  All data on the disc is erased when it is formatted, including recordings 
made with this unit. Data written to the disc by a computer is also erased.
•  When a disc has been formatted using this unit, it may not be possible to 
use it on any other equipment.
•  The disc cannot be formatted if the write protect tab (p. 7) is switched to 
“PROTECT”. Release the protection to continue.
•  The message “Unable to format” appears when trying to format discs this 
unit cannot use.
•  DVD-R and CD-R/RW cannot be formatted.
Select whether to show the top menu after finalizing the disc. Do 
this before finalizing the disc.
1 Press 
x
z to select “Select First play” and press 
ENTER in Step 3 on page 63.
2 Press 
x
z to select “Top Menu” or “Title 1” and 
press ENTER.
Top Menu: The top menu appears first.
Title 1: The disc content is played without displaying the top 
menu.
DVD-R 
						

							65
Disc Operation
Finalize
1 Press 
x
z to select “Finalize” and press ENTER.
2 Press 
{
y to select “Yes” and press ENTER.
3 Press 
{
y to select “Start” and press ENTER.• Finalizing starts.
•  A message appears when finalizing is finished.
4 Press ENTER.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-R
On
Finalize
YesNo This will take approximately ×× minutes.
Do you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc Titles 11
Used 0:22Free 5:38(EP)
DVD-R
On
Finalize
StartCancel You will be unable to record on this disc
one it is finalized.
Are you sure you want to continue?
(Refer to “Finalize” on page 74.)
You can play DVD-R on compatible DVD players by finalizing 
them on this unit, effectively making them into DVD-Video that 
complies with DVD-Video standards.
DVD-R(DVD-R recorded on this unit only)
Notes:
•Do not disconnect the AC power supply cord while the message 
“Finalizing the disc” is on the television. This will render the disc 
unusable.
•  Finalizing takes up to 15 minutes.
•  You can only finalize DVD-R that were recorded on this unit.
•  You cannot record on DVD-R that have been finalized.
•After finalizing
-  The disc becomes play-only and you can no longer record or edit it.
-  DVD-R finalized on this unit may not be playable on other DVD players 
due to the condition of the recording.
-  There is a pause of several seconds between titles.
-  Titles are divided into about 5-minute* chapters.
*  This time varies greatly depending on the condition and mode of 
recording.
•  Visit Panasonic’s homepage for more information about DVDs.
 For U.S.A.:  http://www.panasonic.com/playDVD-R
 For Canada:  http://www.panasonic.ca
Before finalizing After finalizing
Disc display on this unit DVD-R DVD-V
Recording/Editing/ Entering 
name

|×
Play on other DVD players×
|DVD-R finalized on this unit may not be playable on other DVD players due 
to the condition of the recording.
• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 
the unit or the disc. 
						

							66For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
0 --  
1
2
3
4
5
6
7
8
9
0
*
Enter Name
 _
ERASE
SET
1
A
D
G
J
M
P
T
W
.2
B
E
H
K
N
Q
U
X
,3
C
F
I
L
O
R
V
Y
?4
S
Z
!5
a
d
g
j
m
p
t
w
6
b
e
h
k
n
q
u
x
7
c
f
i
l
o
r
v
y
:8
+
/
#
<
[s
{
z
;9
–
=
$
>](
}
\
`0
*%
&
@_
)
¯
|
^
SPACE
1  Show Enter Name screen.
„ To end partway
Press RETURN.
• Text is not saved.
Name field:
Shows the text you have entered
2 Press 
x
z
{
y to select a character and press 
ENTER.
„ To erase a character
Press
x
z
{
y to select the character in the name field 
and press PAUSE.
• You can also erase characters by selecting “ERASE” and 
pressing ENTER.
„ Using the NUMBER keys to enter characters
a. Press 7 to move to the 7th row.
b. Press 7 twice to highlight “R”.
c. Press ENTER.
„ To enter a space
Press CANCEL and press ENTER.
3 Press STOP.•  You can also finish entering the title by selecting “SET” and pressing 
ENTER.
•  Returns to the previously displayed screen.
This feature allows you to enter a name/title. Page
Title 58
Title (timer recording) 46-47
Play list 62
Disc 63
Entering Text
•  Repeat this step to enter other characters.
NUMBER keys
CANCEL
STOP (SET)

x
z
{
yPAUSE
(ERASE)
ENTER
RETURN
5
6
7
8J
M
P
TK
N
Q
UL
O
R
VS
777
RAMCharacters
Title 64 (44*)
Play list 64
Disc 64
*  Title name for timer recording The maximum number of characters:
DVD-RCharacters
Title 44
Disc 40
•  If a name is long, parts of it may not be shown in some screens.
You can give names to recorded titles, etc.
Preparation
•  Release protection before proceeding:
-  Cartridge (p. 7) 
RAM
-  Disc (p. 63) RAM
DVD-RRAM
e.g., entering the letter “R”
Note:•  The full title is shown in the Properties screen (pp. 58, 62), but if you enter 
a long title, only part of it is shown in the program list or play list screen.
•
DVD-R If you enter a long title, only part of it is shown in the menu screen 
after finalization.
Entering text Procedure 
						

							67
Disc OperationPlease see unit’s settings list (See next page), and if required, 
change a setup. 
The settings remain intact even if you switch the unit to standby.
DVD
Play back
Record
Dubbing
/ Edit
Set up
DISC PROTECTION  OFF
CARTRIDGE PROTECTION  OFF
DVD-RAM
DIRECT NAVIGATOR
TIMER RECORDING
FLEXIBLE RECORDING
SETUPPLAY LIST
DISC SETTING
e.g., DVD-RAM
If you change “Recording Time 
in EP Mode”.
3 Press 
x
z to select the Menus and press 
y.
Language
Ratings
Recording Time in EP ModeLevel 8
EP (8H)SET UP
Disc
Video
Audio
TV ScreenMenus tab
4 Press 
x
z to select the Setting items and press 
ENTER.
Language
Ratings
Recording Time in EP ModeLevel 8
EP (8H)SET UP
Disc
Video
Audio
TV Screen
Items
5 Press 
x
z to select the Setting Contents and press 
ENTER.
EP (6H)
EP (8H)
Recording Time in EP ModeSET UP
Disc
Video
Audio
TV Screen
Options
„ To return the previous screen
Press RETURN.
1  Press ACTION to display MAIN MENU and select 
“DVD” then press ENTER. (P.41)
2 Press 
x
z
{
y to select “SETUP” and press ENTER.DVD
ENTER
RETURN 
x
z
{
yACTION
Changing the Unit’s Settings
Unit’s Settings Procedure 
						

							68For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
See page 67 for details on menu operation.
The settings remain intact even if you switch the unit to standby.
Menus
tabItems Options (Underlined items are the factory presets.)
DiscLanguages
Choose the language for audio, subtitle and disc menus. 
DVD-VPress ENTER to display the menu.•  Enter a code (See next page) when you select “Other ****”
•  Some discs start in a certain language despite any changes you make 
here.
Audio Language• English • French • Spanish
•  Original: The original language of each disc will be selected.
• Other ****
Subtitle Language• Automatic:
If the language selected for “Audio Language” is not available, subtitles of 
that language will automatically appear if available on that disc.
• English • French • Spanish • Other ****
Menu Language• English • French • Spanish • Other ****
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password with the 
NUMBER keys when the password screen is shown.
•  Do not forget your password.•  8 No Limit: All DVD-Video can be played.
•  1 to 7: Prohibits play of DVD-Video with corresponding ratings 
recorded on them.
•  0 Lock All: Prohibits play of all DVD-Video.
• Unlock Recorder • Change Password
• Change Level • Temporary Unlock
Recording time in EP mode
Select the maximum number of hours for recording in EP mode (refer 
to “Recording modes and approximate recording times” on page 45).•  EP (6 H): You can record for 6 hours on an unused 4.7 GB disc.
•  EP (8 H): You can record for 8 hours on an unused 4.7 GB disc.
Video3-D Y/C Separation
Allows high quality recording of the received picture.•  On: High quality recording is achieved by precise separation 
of the Y (luminance) and C (color) of the received picture 
signal.
•  Off: Set to Off to reduce ghost images when recording pictures 
with fast motion. Does not work with S-Video input 
pictures.
Hybrid VBR Resolution
The picture recorded to a DVD-RAM can be smoothed out.•  Automatic: The resolution is automated to provide efficient recording 
with less block noise. 
RAM
•  Fixed: The resolution is fixed to ensure that there is no loss of 
source picture resolution while recording.
Still Mode
Select the type of picture shown when you pause play (Refer to 
“Frames and fields” on page 74).• Automatic:
•  Field: Select if jittering occurs when “Automatic” is selected.
•  Frame: Select small text or fine patterns cannot be seen clearly 
when “Automatic” is selected.
Line-in NR
Reduces video type noise while dubbing.
•  When noise reduction is on, “3-D Y/C Separation” (see above) does 
not work regardless of the setting.•  Automatic: Noise reduction only works on input picture from a video 
tape.
•  On: Noise reduction works for any input video.
•  Off: Noise reduction is off. Select when you want to record 
input as is.
Black Level Control
Select normal, lighter or darker for adjusting the black level control to the desired setting for picture enhancement.
Record level
Adjusts the black level of the signal recorded to a DVD.• Lighter: • Darker:
Playback level
Adjusts the black level of the DVD playback signal.• Lighter: • Darker:
AudioSearch Audio & PLAY x1.3
You may hear sound regardless of this setting with some discs.•  On: Audio is heard during first level search forward.
•  Off: Audio is not heard during search. Quick View (see page 
52) does not work.
D.Range Compression 
DVD-V(Dolby Digital only)
Change the dynamic range for late night viewing.• On:
• Off:
Unit’s Settings List 
						

							69
Disc Operation
Menus
tabItems Options (Underlined items are the factory presets.)
AudioDigital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (see page 14).
•  Press ENTER to show the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz 
or 88.2 kHz.
•  Signals are converted to 48 kHz or 44.1 kHz despite the above 
settings if the signals have a sampling frequency of over 
96 kHz or 88.2 kHz, or the disc has copy protection.•  On: Signals are converted to 48 kHz or 44.1 kHz. (Choose 
when the connected equipment cannot process signals 
with a sampling frequency of 96 kHz or 88.2 kHz.)
•  Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when 
the connected equipment can process signals with a 
sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Select how to output the signal, to output 
“Bitstream” so the connected equipment 
decodes the signal, or to decode on this unit 
and output the signal as “PCM” (2 channel).
Note:•  Not making the proper settings may result 
in noise, possibly damage your hearing and 
speakers, and digital recording may not work 
properly.•  Bitstream: When connecting to equipment displaying the Dolby Digital 
logo.
•  PCM: When connecting to equipment not displaying the Dolby 
Digital logo.
DTS•  Bitstream: When connecting to equipment displaying the DTS logo.
•  PCM: When connecting to equipment not displaying the DTS 
logo.
TV
Screen4:3 TV Settings for DVD-Video
You can select how to display the image on the TV when you watch 
16:9 images (DVD-Video) on a 4:3 standard aspect TV.•  Pan & Scan: Video recorded for a widescreen 
is played with the sides cut off 
if Pan & Scan was specified by 
the producer of the disc. If 16:9 
software prohibits Pan & Scan, 
the image will appear in the 
letterbox style (with black bands 
above and below the picture) 
despite the setting here.
•  Letterbox: Video recorded for a widescreen 
is played in the letterbox style.
4:3 TV Settings for DVD-RAM
You can select how to display the image on the TV when you watch 
16:9 images (DVD-RAM) on a 4:3 standard aspect TV.•  4:3: Titles played as recorded.
•  Pan & Scan: Video recorded for a widescreen is played with the sides 
cut off if the Pan & Scan format is specified at the time of 
recording.
•  Letterbox: Video recorded for a widescreen is played in the letterbox 
style.
• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 
the unit or the disc.
Language Code
Abkhazian6566
Afar6565
Afrikaans6570
Albanian8381
Ameharic6577
Arabic6582
Armenian7289
Assamese6583
Aymara6588
Azerbaijani6590
Bashkir6665
Basque6985
Bengali;Bangla6678
Bhutani6890
Bihari6672
Breton6682
Bulgarian6671
Burmese7789
Byelorussian6669
Cambodian7577
Catalan6765
Chinese9072
Corsican6779
Croatian7282
Czech6783Language Code
Danish6865
Dutch7876
English6978
Esperanto6979
Estonian6984
Faroese7079
Fiji7074
Finnish7073
French7082
Frisian7089
Galician7176
Georgian7565
German6869
Greek6976
Greenlandic7576
Guarani7178
Gujarati7185
Hausa7265
Hebrew7387
Hindi7273
Hungarian7285
Icelandic7383
Indonesian7378
Interlingua7365
Irish7165Language Code
Italian7384
Japanese7465
Javanese7487
Kannada7578
Kashmiri7583
Kazakh7575
Kirghiz7589
Korean7579
Kurdish7585
Laothian7679
Latin7665
Latvian, Lettish7686
Lingala7678
Lithuanian7684
Macedonian7775
Malagasy7771
Malay7783
Malayalam7776
Maltese7784
Maori7773
Marathi7782
Moldavian7779
Mongolian7778
Nauru7865
Nepali7869
Language Code List
Language Code
Norwegian7879
Oriya7982
Panjabi8065
Pashto, Pushto8083
Persian7065
Polish8076
Portuguese8084
Quechua8185
Rhaeto-Romance8277
Romanian8279
Russian8285
Samoan8377
Sanskrit8365
Scots Gaelic7168
Serbian8382
Serbo-Croatian8372
Shona8378
Sindhi8368
Singhalese8373
Slovak8375
Slovenian8376
Somali8379
Spanish6983
Sundanese8385
Swahili8387Language Code
Swedish8386
Tagalog8476
Tajik8471
Tamil8465
Tatar8484
Telugu8469
Thai8472
Tibetan6679
Tigrinya8473
Tonga8479
Turkish8482
Turkmen8475
Twi8487
Ukrainian8575
Urdu8582
Uzbek8590
Vietnamese8673
Volapük8679
Welsh6789
Wolof8779
Xhosa8872
Yiddish7473
Yoruba8979
Zulu9085 
						

							70
Transfer ( Dubbing) from DVD
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PRESS AND HOLD DUBBING
  FOR 3 SEC TO START
1  With both VCR and DVD in Stop mode, hold down 
VCR
8 for about 3 seconds after OSD below is 
displayed.
Dubbing stops automatically when disc playback is finished or at 
tape end.
„ To end dubbing
Press STOP.
• When playback (source) side ends and unit enters Stop mode, 
or, if dubbing is stopped due to an error, a message will briefly 
appear.
DUBBING
                VCR0DVD
                 EP  XP
2  Dubbing begins. Information is displayed on the 
screen and sub display.
Sub Display
One Touch Dubbing (DVD 
: Tape)
DVD side:•  Insert a disc containing programs to be dubbed.
VHS side:•  Insert a cassette with record tab intact.
•  Recording will be done from tape beginning. Check tape contents 
carefully as all existing recordings will be completely dubbed over.
•  Select the recording mode. (SP or EP).
Preparation You can transfer (dubbing) programs recorded on a disc*
1 onto a 
tape with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically 
dubbed onto the tapes. If you want to transfer (dubbing) from the 
desired point, see “Manual Dubbing” on next page.
*1  Available discs for transfer (dubbing) onto tape are DVD-RAM and 
DVD-R. Most DVD videos cannot be dubbed because they are 
copy-guarded.
STOPDVD
VCR REC
VCR
8PLAY
PAUSE
„ Only the following operations are allowed while 
transferring (dubbing):
• Stopping transfer (dubbing) by pressing STOP.
• Changing channels.
-
  During dubbing, you can select and watch TV stations using 
NUMBER keys and Channel 
x
z keys. To switch back to the 
dubbing picture, press DVD or VCR. If it is the dubbing picture, CH is 
not displayed.
• Selecting input mode by pressing INPUT.
• Turning unit ON/OFF by pressing POWER. (Dubbing will 
continue even if power is turned off.)
• Changing audio mode by pressing AUDIO.
Notes:
•  While One Touch Transfer (Dubbing) is activated, timer recording cannot 
be started.
•  When the transfer (dubbing) is not started or not executed, the 
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is 
properly prepared.
SPEED
AUDIO
NUMBER
keys
CH
x
z INPUT VCR