Panasonic Sv Av30u Operating Instructions Manual

							31
DPOF CHECKING
RETURN
CARD EDITING
ERASE ALL FILES
FILE PROTECTION
DPOF RESETTING
EXIT
MENU
DPOF CHECKING
RETURN
CARD EDITING
ERASE ALL FILES
FILE PROTECTION
DPOF RESETTING
EXIT
MENU
REC OFFPLAY
Writing Printing Data on a 
Memor y Card (DPOF Setting)
DPOF Setting Printing data (DPOF Setting), such as 
the number of images to be printed, can be written to 
the Memory Card. 
1Play back a still picture to be DPOF-set.  
(
l21)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Press the the UP/DOWN side of the Multi-
function Button until [DPOF SETTING] is 
displayed.
4Press the LEFT/RIGHT side of the Multi-
function Button to set the number to be 
printed and press the [1SET] Button.
≥When DPOF setting is set to 1 or more, the 
[
] indication appears.
ªTo Release All the DPOF Settings
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to 
[PICTURE].
2Press the [MENU] Button.
3Select [CARD EDITING] and and press 
the [1SET] Button.
4Select [DPOF RESETTING] and press the 
[1SET] Button.
 1
≥A verification message appears.
5Select [YES] and press the [1SET] 
Button.
ªTo Check the DPOF Settings in Slide 
Show
Select [DPOF CHECKING] in Step 4 in [To 
Release All the DPOF settings] above 
and press the [1SET] Button.
 2
≥DPOF-set images are displayed one by one for 
approx. 5 seconds each.
DPOF SETTING3
45
2
1
3,4
MENU
2 1
MODE
MENUMENU
3,4,5
1
2



						

							32
Playing back still pictures 
one by one (P.Slide Show)
Plays back still pictures based on the Slide show data 
set by SD-MovieStage Ver.2.0 (supplied).
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to 
[PICTURE].
2Press the [MENU] Button.
3Select the [P.SLIDE SHOW] and press the 
[1SET] Button.
≥P.Slide show starts.
≥Pictures set with SD-MovieStage are 
sequentially displayed, each for approx. 
5 seconds, and the P.Slide show stops.
≥Press [∫] to stop P.Slide show.≥Press [;] to pause P.Slide show.
ªCreating P.Slide Show Data with SD-
MovieStage Ver.2.0
1Install the SD-MovieStage Ver.2.0 on your 
personal computer. (l44)
2Insert the Memory Card into the SD Multi AV 
Device and connect to the personal computer.
3Start the SD-MovieStage Ver.2.0.4Drag and drop thumbnails in the content field to 
the rehearsal field in your favorite order.
5Click the “Windup” button in the reherasal field.6Drag and drop the Windup icon onto SD Memory 
Card icon in the media field.
7Select the type of P.Slide Show and click [OK].
≥Please refer to the PDF-based instruction of the SD-
MovieStage Ver.2.0 for further information.
CARD EDITING
DISPLAY SETUP
RETURN
P.SLIDE SHOW
BEEP SOUNDON
SETUP MENU
EXIT
MENU
1MODEREC OFFPLAY
2
3MENU



						

							33
REC
OFFPLAY
MENU
For matting the Memor y Card
If a Memory Card becomes unreadable by the SD 
Multi AV Device, formatting it may make it reusable. 
Formatting erases all the data recorded on the 
Memory Card. 
1Set the Power/Mode Switch to [REC].
2Press the [MENU] Button.
3Select [INITIAL SETUP] and press the 
[1SET] Button.
4Select [CARD FORMAT] and press the 
[1SET] Button.
≥A verification message appears .
5Select [YES] and press the [1SET] 
Button to be formatted.
≥Formatting is carried out.≥If [NO] is selected, the Memory Card format is 
cancelled.
INITIAL SETUP
DISPLAY SETUP
RETURN
SETUP MENU
 QUALITYFINE
BEEP SOUNDOFF
FLASHOFF
EXIT
MENU
AC MAINS
RETURN
INITIAL SETUP
CARD FORMAT
50Hz
CLOCK SET
EXIT
MENU
1
2
3
4
5



						

							34
Using the AV Cradle
Fitting on the AV Cradle eases charging. The AV Cradle allows the Device to be connected 
to the external device, such as a TV in order for the pictures on this Device to be viewed on 
the TV. The AV Cradle also allows the pictures on an external device to be recorded on a 
Card using the timer function.
≥The charging configuration is the same as the one for connecting the DC Input Lead to the 
SD Multi AV Device. ïl10ð



						

							35



Fitting on the AV Cradle
1While pressing the [PUSH1] Buttons, 
extend the AV Cradle.
2Place the SD Multi AV Device on the AV 
Cradle.
≥The grooves 1 of the SD Multi AV Device fit in 
the leading protrusions 2.
≥Place the SD Multi AV Device on the AV Cradle 
so that the mating connectors 3 are in 
alignment.
3Push the AV Cradle until you hear it click.
4Connect the AC Adaptor to the AC main 
socket. 
5Connect the DC Input Lead to the 
[DC IN 4.8V] socket on the AV Cradle. 
DC IN 4.8V
1
1
2
3
4,5



						

							36
REC OFFPLAY
Playing Back on an external device 
By connecting the SD Multi AV Device in AV Cradle with an external device, the recorded 
scenes can be played back on an external device such as a TV or Audio device.
1Put the SD Multi AV Device in the AV 
Cradle. (l35)
2Connect the [AV OUT] socket of the AV 
Cradle to the AV Input Sockets of the 
external device 
2 using supplied AV 
Cable 
1.
3Set the AV Input Control Switch to 
[AV IN
SD].
4Set the AV Output Control Switch to 
[AV OUT].
5Set the Power/Mode Switch to [PLAY] 
and set the operation mode to be  
desired.
6Select the file to be played back and 
press the [1SET] Button.
AV OUT AV IN
AV IN    SD AV OUT
SD PLAY
LCD MONITORAV IN    AV OUT


5
6
1
234
MODE



						

							37
Useful Connection (AV Cradle always connected)
If your external device has just one output socket, you can connect the SD Multi AV Device as 
follows.
ªSample 1
Details of the connectionTo view or listen to pictures or sounds recorded on a Card by an external device, refer to Page 
36. To record pictures from an external device onto a Card, refer to Page 38.
.
AV OUT AV IN
AV IN    SD AV OUT
SD PLAY
LCD MONITORAV IN    AV OUTDC IN 4.8V
ªSample 2 (example when The SD Multi AV Device is not used)
Even if you do not use the SD Multi AV Device, this connection can be used without 
disconnecting the AV Cradle.
For connection, set the AV Input Control Switch to [AV INAV  O U T ] .
AV OUT AV IN
AV IN    SD AV OUT
SD PLAY
LCD MONITORAV IN    AV OUT



						

							38
AV OUT AV IN
AV IN    SD AV OUT
SD PLAY
LCD MONITORAV IN    AV OUT


DC IN 4.8V
Recording pictures supplied from an external 
device
1Put the SD Multi AV Device in the AV 
Cradle. (l35)
2Connect the [AV IN] socket of the AV 
Cradle to the AV Output Sockets of the 
external device 
2 using supplied AV 
Cable 
1.
3Set the AV Input Control Switch to 
[AV IN
SD].
4Set the Power/Mode Switch to [REC] and 
set the operation mode to [PICTURE] or 
[MPEG4].
5Select desired image quality. (l20, 22)
6Set up the external device.
≥Confirm that the image or sound signal is input 
into the SD Multi AV Device.
7Press the Recording Start/Stop Button.
≥Recording starts.≥When the moving picture is being recorded, 
press the Recording Start/Stop Button again to 
stop recording.
74
REC
OFFPLAYMODE



						

							39
MENU
RETURN
AUTO RECORD STANDBY
REC TIMER180 MIN.
AUTO RECORDING SETUP
EXIT
MENU
Using Auto Recording 
Function
When the input signal is detected, the recording starts 
automatically.
1Connect the SD Multi AV Device with the 
external device. (l38)
≥Always use the AC adaptor. This function does 
not work with the battery alone.
2Set up the external device such as timer 
setting.
3Confirm that the image or sound signal is 
not output.
4Set the Power/Mode Switch to [REC] and 
set the operation mode to [MPEG4].
5Press the [MENU] Button.
6Select [AUTO RECORDING SETUP] and 
press the [1SET] Button.
7Set [REC TIMER] to desired time.
≥The setting time is the period between starting 
recording and finishing recording.
8Select [AUTO RECORD STANDBY] and 
press the [1SET] Button.
≥A verification message appears.
9Select [YES] and press the [1SET] 
Button.
≥Transits to the standby mode and the power is 
automatically shut down.
≥When the input signal is detected, the recording 
starts.
≥Pressing the Recording Start/Stop button during 
recording will stop the recording.
INITIAL SETUP
DISPLAY SETUP
RETURN
SETUP MENU
MPEG4 MODEFINE
BEEP SOUNDON
AUTO RECORDING SETUP
EXIT
MENU
5
6
RETURN
AUTO RECORD STANDBY
REC TIMER180 MIN.
AUTO RECORDING SETUP
EXIT
MENU
4REC
OFFPLAY
7
8
MODE



						

							40
On a Personal Computer
About the supplied software
ªAbout the supplied software
The SD Multi AV Device comes with SD-Jukebox Ver.3.0, SD-MovieStage Ver.2.0, and a 
USB driver to allow the SD Multi AV Device to be used on a personal computer. By using 
these software packages, you can record high-quality music which can be played back in 
the [MUSIC] mode of the SD Multi AV Device (SD-Jukebox Ver.3.0), arrange the pictures on 
a Memory Card, and cut and edit moving pictures (SD-MovieStage Ver.2.0). Please read 
the PDF-format instructions installed with the software for how to use the software. These 
Operating Instructions describe only how to install and start up the software and how to 
connect the SD Multi AV Device to a personal computer. Install the USB driver before 
connecting the SD Multi AV Device to a personal computer.
≥While every attempt is made to create software that will operate properly in most personal 
computer’s, previously installed software and unique hardware in the PC may 
occasionally cause an operating problem.
≥USB Driver, SD-MovieStage Ver.2.0 and SD-Jukebox Ver.3.0 cannot be used on  
Microsoft Windows 3.1,  Windows 95, Windows 98, Windows NT and Macintosh.
≥Operation on an upgraded OS is not guaranteed.≥Operation on an OS other than the one pre-installed is not guaranteed.≥Dual CPUs or Multi-boot environments are not supported.
≥Only users having system administrator (Administrator) authority can use these software 
applications.
≥Click the desired language in [Read before you install] on the startup screen before 
installation and read the Readme file.
≥The software is available in English.≥Even if you operate a personal computer in French, the application and PDF manual 
installed is the English version. Please refer to the PDF manual of the French version in 
the supplied CD-ROM.
SD-Jukebox incorporates copyright protection technology using encryption technology in 
order to protect copyrights, to ensure the healthy development of music culture, and to 
protect the rights of  valid purchasers.
The following restrictions are therefore applied:≥SD-Jukebox records music data in encrypted form onto your hard disk drive. Encrypted 
music cannot be moved/copied to other folders, drives, and other personal computers 
for use.
≥Unique information pertaining to your personal computer’s processor and hard disk drive 
is used in the encryption process. Therefore, if either the processor or hard disk drive is 
replaced, previously created music data will no longer be available for use.
≥Tracks on an SD Memory Card cannot be played back on a personal computer.
≥SD-Jukebox cannot play or record music CDs that do not have a  mark on the disc 
label.