Panasonic Sv Av30u Operating Instructions Manual

							21
REC OFFPLAY
Playing back Still Pictures
Plays back still pictures recorded on the Memory 
Card.
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to 
[PICTURE].
≥Still picture files recorded on the Memory Card 
are displayed in the index picture screen.
2Press the UP/DOWN/LEFT/RIGHT side of 
the Multi-function Button to select a 
desired file.
3Press the [1SET] Button.
≥A still picture file is played back.
ªOperation during Playback
[∫]: Stop (Reverts to the index picture 
screen.)
[:], [9]: Displays the previous (next) screen.
[1SET]: Slide show
ªTo Play Back All of the Still Pictures 
One by One
While playing back, press the [1SET] Button 1.
≥The image is played back for 5 seconds.
≥Press [∫] to stop.≥Press [;] to pause.
≥Only JPEG formatted files are able to play on your 
SD Multi AV Device. (In some cases, even such a 
file may not be played back.)
1
2
3MODE
1



						

							22
Recording Moving Pictures 
(MPEG4)
You can record moving pictures on the Memory Card.
1Set the Power/Mode Switch to [REC] and 
set the operation mode to [MPEG4].
2Press the [MENU] Button.
3Set the [MPEG4 MODE] to desired 
picture quality.
≥Select one of [SUPER FINE],  [FINE], 
[NORMAL], or [ECONOMY].
≥Press the [MENU] Button after completing the 
setting. 
4Press the Recording Start/Stop Button.
≥Recording starts.
≥While recording the moving picture, press the 
Recording Start/Stop Button to stop recording.
ªTo Double the Image Size
Press [2k] for approx. 1 second 1.
≥Press [2k] again to turn back to the normal size.
1REC
OFFPLAYMODE
2
3MENU
INITIAL SETUP
DISPLAY SETUP
RETURN
SETUP MENU
MPEG4 MODESUPER FINE
BEEP SOUNDON
AUTO RECORDING SETUP
EXIT
MENU
 2
4
1



						

							23
Playing Back Moving 
Pictures (MPEG4)
Plays back moving pictures recorded on the Memory 
Card.
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to [MPEG4].
≥Moving picture files recorded on the Memory 
Card are displayed in the index picture screen.
2Press the UP/DOWN/LEFT/RIGHT side of 
the Multi-function Button to select a 
desired file.
3Press the [1SET] Button.
≥A moving picture file is played back.≥After playing back continuously from the 
selected file to the last file, the display reverts to 
the index picture screen.
ªOperation during Playback
[∫]: Stop (Reverts to the index picture 
screen.)
[;]: Pause (Press during playing.)
[:], [9]: Finding the beginning of a file (Tap 
this button.)
[:], [9]: Fast forwarding/rewinding (Press and 
hold this button for approx. 1 second.)
ªFor Repeat Playback
Press the [MENU] Button and set [REPEAT] to 
[1FILE] or [ALL]. 
2
ªTo Change the Display Size
Press the [MENU] Button and set [SCREEN] to 
[FULL] or [NORMAL]. 
1
REC OFFPLAY1
2MODE
3
1
2



						

							24
Recording Voice (Voice 
Recording Function)
You can record voice data on the Memory Card.
1Set the Power/Mode Switch to [REC] and 
set the operation mode to [VOICE].
2Press the Recording Start/Stop Button.
≥Recording starts.
3Speak into the built-in microphone 1 of 
this SD Multi AV Device.
≥While recording voice, press the Recording 
Start/Stop Button to stop recording.
≥The LCD Monitor will shut off approx. 5 seconds 
after starting to record. This is not a malfunction 
but a normal sequence in recording. When voice 
recording stops, the LCD Monitor turns on 
again.
≥The recorded file is automatically locked (to prevent 
accidental erasure).
≥If the [1SET] Button is pressed while recording, the 
LCD Monitor turns on and will turn off again in 
approx. 5 seconds.
≥If the sound is recorded again after stopping 
recording, it will be saved as another file.
VOICE
1
1REC
OFFPLAYMODE
2
3



						

							25
Hearing the Voice Recorded 
(Voice Playback)
Plays back the voice files recorded by the SD Multi AV 
Device. 
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to [VOICE].
≥Voice files recorded on the Memory Card are 
displayed in the form of a list.
2Press the UP/DOWN side of the Multi-
function Button to select a desired file.
3Press the [1SET] Button.
≥A voice file is played back.
≥In approx. 5 seconds after playing back, the 
Monitor will turn off.
≥When stopping playback, the file list reverts and 
the LCD Monitor turns on again.
ªOperation during Playback
[∫]: Stop (Reverts to the form of a list)
[;]: Pause (Press during playback)[:],[9]: Finding the beginning of a file (Tap 
this button.)
[:],[9]: Fast forward/fast backward (Press 
and hold.)
≥If the [1SET] Button is pressed while playing, the 
LCD Monitor turns on and will turn off again in 
approx. 5 seconds.
≥Hold down the [9] for approx.1 second for 10 
times the normal speed or for approx. 7 seconds for 
60 times.
VOICE
[100] TRACK001
[100] TRACK002
[100] TRACK003
[100] TRACK004
[100] TRACK005
REC OFFPLAY1MODE
2
3



						

							26
Listening to Music (Music 
Playback)
You can play MPEG-2 AAC and MP3 data. Music files 
must be written on the SD Memory Card using the 
SD-Jukebox Ver.3.0 (supplied accessory) special 
software program in order for the SD Multi AV Device 
to play music. For the SD-Jukebox Ver.3.0, refer to 
Page 40 and the operating instructions for the SD-
Jukebox Ver.3.0 in PDF format installed with the 
software.
1Set the Power/Mode Switch to [PLAY] 
and set the operation mode to [MUSIC].
≥Music files recorded on the Memory Card are 
displayed in the index picture screen.
2Press the UP/DOWN/LEFT/RIGHT side of 
Multi-function Button to select a desired 
file.
≥Music files not having a still picture associated 
are displayed as shown 1.
3Press the [1SET] Button.
≥A music file is played back.
ªOperation during playing
[∫]: Stop (Reverts to the index picture 
screen.)
[;]: Pause (Press during playback.)
[:],[9]: Finding the beginning of a file (Tap 
this button.)
[:],[9]: Fast forward/fast backward (Press 
and hold.)
(No audio is output during fast-
forwarding/fast-backwarding.)
ªTo Repeat Playback
Set [REPEAT] to [1MUSIC] or [ALL]. 2[1MUSIC]: The track being played is repeated.
[ALL]:  All the tracks (when a playlist is 
selected, all the tracks in the playlist) 
are repeated.
MUSIC
The Sea /
MUSIC
DISPLAY SETUP
RETURN
SETUP MENU
POWER SAVE
BEEP SOUND
ON ALL
ON
REPEAT
SELECT PLAYLIST
EXIT
MENU
2
3
REC OFFPLAY1MODE
1
2



						

							27
ªSelecting a Playlist
Playlists set using the SD-Jukebox Ver.3.0 can be 
played back.
Select a desired playlist in [SELECT PLAYLIST] of 
the menu. 1
ªSelecting a desired Sound Quality
Music quality can be selected with the supplied 
Remote Controller. (Use earphones, or the audio 
cannot be heard.)
Press the [EQ] button on the Remote Controller.
≥Every time the [EQ] Button is pressed, the Sound 
quality changes as followed.
No display: Normal tone[S-XBS]:  Punchy super bass sound
[TRAIN]:  Sound friendly to the ears with sound 
leakage protection
Adjusting the Volume
Adjusts the playback audio level for moving picture 
files, music files, and voice files.
1Press [s] or [r] of the [VOL] Button.
≥The [VOLUME] indication appears. 2
≥If the volume buttons are left unoperated for 2 
seconds, the [VOLUME] indication will 
automatically disappear.
No displayl[S-XBS]l[TRAIN]lNo display
DEFAULT PLAYLIST
PLAYLIST -1
PLAYLIST -2
PLAYLIST -3
SELECT PLAYLIST
EQHOLD
EQ
VOL +–
VOLUME
1
2 1



						

							28
Advanced Functions
Backlight Compensation 
Function
This prevents a recording subject from being recorded 
too dark in backlight. (Backlight is the light that shines 
from behind a recording subject.)
1Set the Power/Mode Switch to [REC] and 
set the operation mode to [PICTURE] or 
[MPEG4].
2Press [ª] for approx. 1 second.
≥The [ª] Indication is displayed.≥Press [ª] for approx. 1 second again to resume 
Normal Recording mode.
Adjusting White Balance
The SD Multi AV Device adjusts White Balance 
automatically. However, depending on the scene or 
light condition, the Automatic White Balance may not 
be able to bring out natural colors. In such cases, the 
white balance can be adjusted manually.
1Set the Power/Mode Switch to [REC] and 
set the operation mode to [PICTURE] or 
[MPEG4].
2Point the SD Multi AV Device at a full-
screen white subject (e.g. white paper).
3Keep pressing [1] until the [1] 
Indication is displayed.
≥Press the [1] until the  [1] Indication 
disappears to resume automatic adjustment.
2
2
3 1
REC
OFFPLAYMODE
1REC
OFFPLAYMODE



						

							29
DPOF CHECKING
RETURN
CARD EDITING
ERASE ALL FILES
FILE PROTECTION
DPOF RESETTING
EXIT
MENU
Erasing the Files Recorded 
on a Memor y Card
Using SD Multi AV Device, you can erase files 
recorded on the Memory Card. After files are erased, 
it cannot be restored.
1Play back the file to be erased or let it 
pause. (
l21, 23, 25)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Press the UP/DOWN side of the Multi-
function Button until [ERASE CARD 
FILE] is displayed.
4Press the LEFT/RIGHT side of the Multi-
function Button to select [YES].
5Press the [1SET] Button.
≥The selected file is erased from the Memory 
Card.
≥If [NO] is selected, the file selection is cancelled.≥After erasing the file, the display reverts to the 
index picture screen.
ªTo Erase All Files
1Set the Power/Mode Switch to [PLAY] 
and set to the desired operation mode.
2Press the [MENU] Button.
3Select [CARD EDITING] and press the  
[1SET] Button.
4Select [ERASE ALL FILES] and press the  
[1SET] Button.
≥A verification message appears.
5Select [YES] and press the [1SET] 
Button.
2
ERASE CARD FILE3
4YES
1
3,4,5
MENU
2 1
MODE
MENUMENU
3,4,5
REC OFFPLAY



						

							30
DPOF CHECKING
RETURN
CARD EDITING
ERASE ALL FILES
FILE PROTECTION
DPOF RESETTING
EXIT
MENU
Protecting files 
(File Protection)
Precious files recorded on the Memory Card can be 
locked to prevent accidental erasure.
1Play back the file to be locked or let it 
pause. (
l21, 23, 25)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Press the UP/DOWN side of the Multi-
function Button until [FILE 
PROTECTION] is displayed.
4Press the LEFT/RIGHT side of the Multi-
function Button to select [LOCK].
5Press the [1SET] Button.
≥The selected file is locked and the [] 
Indication is attached to the selected files.
ªTo Release the File Protection
Select [UNLOCK] in Step 4 above.
≥The [] Indication disappears.
ªTo Lock All Files
1Set the Power/Mode Switch to [PLAY] 
and set to the desired operation mode.
2Press the [MENU] Button.
3Select [CARD EDITING] and press the  
[1SET] Button.
4Select [FILE PROTECTION] and press the  
[1SET] Button.
≥A verification message appears.
5Select [LOCK] and press the [1SET] 
Button.
≥To unlock all files, select [UNLOCK] and press 
the [1SET] Button.
FILE PROTECTION3
4LOCK
2
1
3,4,5
MENU
2 1
MODE
MENUMENU
3,4,5
REC OFFPLAY