Panasonic Sv Av100 Operating Instructions Manual

SN
fåëí~ääáåÖ=jÉÇá~pí~ÖÉ=C=rp_=
aêáîÉê
Do not connect the USB cable until the USB driver has 
been installed.
NInsert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.
≥The launcher for the installation is activated 
automatically. 
OClick [MediaStage & USB Driver].
≥When [MediaStage & USB Driver] screen 
appears, click [Next].
PRead License Agreement carefully, and 
click [Yes], if you accept the terms of the 
agreement.
QComplete the installation according to the 
message.
≥The USB Driver...

SO
fåëí~ääáåÖ=rp_=aêáîÉê
When the USB driver is installed, the SD Video 
Camera will be recognized by the personal computer.
Do not connect the USB cable until the USB driver has 
been installed.
≥When [MediaStage & USB Driver] is already 
installed, you do not need to install [USB Driver].
NInsert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.
≥The launcher for installation is activated 
automatically.
OClick [USB Driver].
PClick [Next].
QClick [Finish].
O
P
Q
AV100PP.book  62 ページ...

SP
`çååÉÅíáåÖ=ïáíÜ=íÜÉ=m`
NOpen the AV Input/Output and USB 
Terminal Cover and DC Input Socket 
Cover.
≥When using AV Cradle, put the SD Video 
Camera in the AV Cradle after opening AV Input/
Output and USB Terminal Cover.
OConnect with AC Adaptor 1. (l12)
PConnect the [USB] Terminal 2 of the SD 
Video Camera to the USB Terminal of the 
personal computer 3 using supplied USB 
Cable 4.
≥The SD Video Camera works as a personal 
computer peripheral. (Operation of the SD Video 
Camera is disabled.)
≥The...

SQ
pí~êíáåÖ=íÜÉ=pçÑíï~êÉ
ªStarting the MediaStage for AV100
1Select [Start]>> [All programs 
(programs)]>> [Panasonic]>> 
[MediaStage]>> [MediaStage for AV100].
≥For other notes, see page 85.
aáëÅçååÉÅíáåÖ=íÜÉ=rp_=`~ÄäÉ=
ë~ÑÉäó
If you use Windows XP/2000, remove the USB Cable 
using the following method.
If you use Windows Me/98SE, check that the Card 
Access Lamp is out, then remove the USB Cable. 
(Keep the SD Video Camera turned on.)
NDouble click the  in task tray.
≥Hardware disconnect dialog box...

SR
`çåëíêìÅíáåÖ=~=cçäÇÉê=ïÜÉå=
íÜÉ=jÉãçêó=`~êÇ=áë=ìëÉÇ=
ïáíÜ=~=m`
≥When the Memory Card with data recorded by the 
SD Video Camera is inserted into a personal 
computer, folders will be displayed as in the figure.
≥Use the MediaStage for AV100 for operating files 
in the Memory Card. (l85)
[DCIM]: The images (IMGA0001.JPG etc.) in 
this folder are recorded in the JPEG 
format. ([100-0001] or similar 
indication is displayed on the SD 
Video Camera.)
[MISC]: Files in which DPOF Data has been 
set to the...

SS
líÜÉêë
`Ü~êÖÉ=íÜÉ=ÄìáäíJáå=Ä~ííÉêó=
Ñçê=ã~áåí~áåáåÖ=íÜÉ=Ç~íÉ=
áåÑçêã~íáçå
This built-in battery is used for the memory of date and 
time. If [0] indicator is displayed when the power is 
on, the built-in battery may be exhausted. Charge 
using the following procedure:
NTake the battery out and plug in the AC 
adaptor. (
l12)
OTurn the power off and leave the SD Video 
Camera as it is for approx. 12 hours. 
≥The built-in battery can be used for about 6 months 
by 1 charge. (It changes with operating.)...

ST
rëáåÖ=^ÅÅÉëëçêáÉë
ªInserting the Button-type Battery
Before using the Remote Controller, insert the 
supplied button-type battery.
NWhile pressing the Stopper 1, pull out 
the Battery Holder.
OInsert the button-type battery with the 
imprint (r) facing upward.
PInsert the Battery Holder into the Remote 
Controller.
≥When the button-type battery becomes weak, 
replace it with a new CR2025 battery. (A battery 
is normally expected to last about one year, 
however, it depends on operation frequency.)
≥Be...

SU
ªUsing the Remote Controller
NDirect the Remote Controller at the 
Remote Controller Sensor 1 on the SD 
Video Camera and press the desired 
button.
≥Distance from the SD Video Camera: Within 
approx. 15 feet (5 meters).
≥Angle: Within approx. 15 degrees in all directions 
from the central axis.
≥The above operative ranges are for indoor use. 
Outdoors or under strong light, the SD Video Camera 
may not operate properly even within the above 
ranges.
ªAttaching the Hand Strap/Lens Cap
To protect the...

SV
ªUsing the Stand
The Card Case can be used as a Movie Stand. It can 
be used for Portrait Picture Recording etc., or 
whenever you do not want to record with the SD Video 
Camera in your hand.
NOpen the Card Case.
OFit the leading protrusions 1 of the Stand 
and the grooves 2 of the SD Video 
Camera, and place the SD Video Camera 
on the Stand.
^ÑíÉê=rëÉ
1Turn off the SD Video Camera. (l17)
2Take out the Memory Card. (l14)
3Retract the LCD Monitor.
4Attach the Lens Cap on the SD Video 
Camera. (
l68)...

TM
fåÇáÅ~íáçåë=EoÉÅçêÇáåÖ=jçÇÉF
 1Program AE Mode (l38)5: Sports Mode
7:Portrait Mode
4:Low Light Mode
Ω:Spotlight Modeº: Surf & Snow Mode
 2Backlight Mode (l35) 3White Balance Mode (l36)AWB: Auto White Balance 
Adjustment
{:Indoor Mode (recording 
under incandescent light)
z:Outdoor Mode
|:Fluorescent light Mode1: The white balance setting 
that was previously set 
manually
 4Focus Setting (l37)AF: Auto Focus
MF: Manual Focus 5Operation Mode (l27, 28, 32)MPEG2: MPEG2 Motion Image 
Mode
MPEG4: MPEG4...