Panasonic Sv Av100 Operating Instructions Manual

ON Card
15Capacity of a Card [Capacity] (l51)
16Recover writing speed of the data to a Card 
[Clean Up] (l26)
17Formatting a Card [Format Card] (l51)
Others
18Setting a Repeat Playback [Repeat Play] (l52)
19Display Mode [Display] (l53)
[PICTURE] mode
Scene
20Setting DPOF [DPOF] (l42)
Others
21Setting a Slide Show [Slide Show] (l53)
≥The other functions of [PICTURE] mode are the 
same as those of [MPEG4] mode.
18
19ETC.
ETC.
1516
17
20ETC.
ETC.21
AV100PP.book  21 ページ  ２００３年８月２２日　金曜日　午後４時３０分 

OO
pÉííáåÖ=a~íÉ=~åÇ=qáãÉ
At the time of purchase of the SD Video Camera, 
the date and time are not set. First, set the date 
and time, then use the SD Video Camera.
NPress the [REC/PLAY] Button to select 
Recording Mode.
OPress the [MENU] Button and select [Date 
Setup] and then press the [1SET] 
Button.
PSelect [Date Set] and press the [1SET] 
Button.
QPress the ;/∫/6/5 side of the 
Multi-function Button to set the desired 
Date and Time.
≥6/5: Select the item
≥;/∫: Change the value
≥Year will cycle in...

OP
ªChange of the Date Display Mode
Select a desired mode on [Date Mode] in 
[Date Setup].
ªChange of the Date/Time Indication 
Mode
Select a desired mode on [Indication] in 
[Date Setup].
1: [Date]
2: [Date/Time]
3: [Off]
≥When battery and AC adaptor are not attached and 
the [RESET] Button is pressed, the date and time will 
be set to [JAN 1 2003 12:00AM].
≥When the built-in battery has been exhausted, set 
the date and time after the battery has charged. 
(l66)
Date ModeDisplay
M/D/Y8:00PM
DEC 20...

OQ
^ÇàìëíáåÖ=_êáÖÜíåÉëë=~åÇ=
`çäçê=iÉîÉä=çå=íÜÉ=i`a=
jçåáíçê
LCD Brightness [LCD Bright]
Adjusts the brightness of the image on the LCD 
screen.
LCD Color Level [LCD Color]
Adjusts the color saturation of the image on the LCD 
screen.
NPress the [REC/PLAY] Button to select 
Recording Mode.
OPress the [MENU] Button.
PSelect [Display Setup] and press the 
[1SET] Button.
QSelect [LCD Bright] or [LCD Color] and 
press the [1SET] Button.
RPress the 6/5 side of the 
Multi-function Button for adjustment.
≥If...

OR
_~ëáÅ=cìåÅíáçåë
_ÉÑçêÉ=oÉÅçêÇáåÖ=çéÉê~íáçå
Do not cover the sensor with your hand when using the 
Remote Control and recording pictures.
1Remote Control Sensor
2White Balance Sensor
ªMPEG2/MPEG4 Motion Image
MPEG stands for Moving Picture Experts Group. It is 
the name of the standard for the compression and 
extension of a digital motion image and sound enacted 
by ITU-TS (International Telecommunications Union-
Telecommunication Standardization Sector) and ISO 
(International Standardization...

OS
`äÉ~å=ré=cìåÅíáçå
Generally, if you repeatedly write data on a Memory 
Card, the data writing speed is decreased by the 
characteristic of the Memory Card.
To recover the data writing speed on available SD 
Memory Card, [Clean Up] function is installed in this 
unit. 
When repeating write data on an SD Memory Card, it 
may be suddenly stopped while recording MPEG2 
motion images. In this case, an error message [Record 
Stopped. Clean up in no data area?] appears. Be sure 
to use the function. (l73)...

OT
oÉÅçêÇáåÖ=jçíáçå=fã~ÖÉë=
EjmbdOF
You can record motion images in high quality on the 
Memory Card. Therefore, it is suitable for recording 
important pictures.
In MPEG2 motion image recording, SD Memory 
Card with the high-speed transmission rate of 
10 MB/s is needed. Be sure to check available 
SD Memory Card on the following web site.
For USA 
For Canada 
[FINE]: 256 MB or more
[NORM]: 32 MB or more
≥You cannot record MPEG2 motion images on a card 
other than the above.
NPress the [REC/PLAY] Button...

OU
oÉÅçêÇáåÖ=jçíáçå=fã~ÖÉë=
EjmbdQF
MPEG4 recording provides less visual quality than 
MPEG2 recording. It is recommended when long 
recording durations are needed. Since the file size is 
much smaller than MPEG2, it’s ideal if the recording 
needs to be sent as an E-mail attachment.
NPress the [REC/PLAY] Button to select 
Recording Mode and set the operation 
mode to [MPEG4].
OPress the [MENU] Button and set [Quality] 
on [Record Functions Setup] to desired 
picture quality and then press the 
[1SET]...

OV
mä~óáåÖ=_~Åâ=jçíáçå=fã~ÖÉë=
EjmbdOF
Plays back motion images recorded on the Memory 
Card.
NPress the [REC/PLAY] Button to select 
Playback Mode and set the operation 
mode to [MPEG2].
≥Motion image files recorded on the Memory Card 
are displayed in the index picture screen.
OPress the ;/∫/6/5 side of the 
Multi-function Button to select a desired 
file.
PPress the [1SET] Button.
≥A motion image file is played back.
≥After playing back continuously from the selected 
file to the last file, the...

PM
mä~óáåÖ=_~Åâ=jçíáçå=fã~ÖÉë=
EjmbdQF
Plays back motion images recorded on the Memory 
Card.
NPress the [REC/PLAY] Button to select 
Playback Mode and set the operation 
mode to [MPEG4].
≥Motion image files recorded on the Memory Card 
are displayed in the index picture screen.
OPress the ;/∫/6/5 side of the 
Multi-function Button to select a desired 
file.
PPress the [1SET] Button.
≥A motion image file is played back.
≥After playing back continuously from the selected 
file to the last file, the...