Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Operating Instructions

							Installing the Printer Driver
31
Connecting with a USB Cable (Mac 8.6/9x)
Printer Section
NOTE1Click the Set_Default Printer in the Printing menu when your machine is set to the default
printer.
11Click the   button.
12A status bar indicates that the printer driver is
being installed.
13The driver creates a new desktop printer icon for
your device. 
						

							Installing the Printer Driver
32
NOTE1 Open the Printer Center and click your machine, then select Make Default from the Printers
menu when your machine is set to the default printer.
Connecting with a USB Cable (Mac OS X)
1Connect the printer to the PC with an USB
cable. Turn the Power Switch of your machine
ON.
2Open the Printer Center and click the Add
Printer…from the Printers menu.
31. Select USB.
2. Select your printer.
3. Select Auto Select or Panasonic_DP-
xxxx.ppd from the Printer Model menu.
4. Click the   button.
4Your machine is shown on the Printer List.
Close the Printer Center. 
						

							33
Printer Section
Installing the LPR (Line Printer Remote) Monitor
Windows 98/Me
1Insert the Panasonic Printing System CD-ROM.
2Click on the desired language.
3Click  the   button.
4Click Printer Driver (Post Script3).
5Click Install LPR Monitor.
Next
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
34
Windows 98/Me
6The M-LPR Port Monitor Setup dialog box appears.
Click the   button.
7The required files are copied.
8The setup program copies the necessary files onto
the hard disk of your PC.
When the setup process is completed, a message
is displayed prompting you to restart your
computer.
It is recommended that you restart your computer
now so that the LPR Monitor can be started.
Click the   button.
9If you have not installed the printer driver yet, please 
proceed to Installing the Printer Driver on page 5.
After your computer has rebooted, click the Start 
button, select Settings, and then click Printers.
The Printers folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
OK
Finish 
						

							Installing the LPR (Line Printer Remote) Monitor
35
Windows 98/Me
Printer Section
10The printer properties dialog box appears.
The following step registers the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
11Select the Details tab and click the   
button.Add Port...
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
36
Windows 98/Me
NOTE1. To print data via LAN, the LPR Monitor must be installed on your PC.
12The Add Port dialog box appears. Click the Other 
radio button, select M-LPR Port Monitor from Click 
the type of port you want to add: list, and click the 
 button.
13The M-LPR Port Monitor dialog box appears.
Type the IP Address of the machine in the Host 
name or IP address: text box and the queue name 
(e.g. New105) in the Queue name: text box.
Click the   button. If an error occurs 
because the queue name had already been used for 
the same IP Address, select a different unique name 
such as New106.
14The screen reverts to the Printer Properties.
Check that the Print to the following port: has been 
changed as entered in step 13, and click on the 
Apply button first and then the   button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
OK
OK
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
37
Printer Section
Logon using an account with administrator rights.
Windows NT 4.0
1Click the Start button, select Settings, and click 
Control Panel.
The Control Panel window appears.
Double-click on the Network applet.
The Network dialog box appears.
2Click on the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in the 
Network Services list.)
If it is already installed, skip to Step 7. Otherwise 
continue installing the LPR Service.
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
38
Windows NT 4.0
3Click the   button to display the Select 
Network Service dialog box, and select Microsoft 
TCP/IP Printing.
Click the   button.
4The Windows NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type 
D:\i386 (where D: is your CD-ROM drive).
Click the   button.
5After the files have been copied into the Hard Drive 
of your PC, the display returns to the Network dialog 
box. Confirm that the Microsoft TCP/IP Printing 
service has been added to Network Services list.
Click the   button.
Note:
If the OK button does not change into a 
Close button, Remove and reinstall the 
Microsoft TCP/IP Printing service.
6The Network Settings Change dialog box is 
displayed, click the   button to restart 
your computer now.
You have now completed the LPR Service 
installation.
Add...
OK
Continue
Close
Yes 
						

							Installing the LPR (Line Printer Remote) Monitor
39
Windows NT 4.0
Printer Section
7After your computer has rebooted, log on with an 
account with Administrator Priviledges, click the Start 
button, select Settings, and then click Printers.
The Printers folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
8The following step registers the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
Select the Ports Tab and click the    
button.
9The Printer Ports dialog box appears.
Select LPR Port and click the   
button.
Add Port...
New Port
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
40
Windows NT 4.0
10The Add LPR compatible printer dialog box 
appears.
Enter the IP Address of the printer in the upper text 
field, and lp for the print queue name in the lower 
text field.
Click the   button.
(Please wait while the wizard verifies the IP Address 
and connectivity to the network.
11The Printer Ports dialog box appears.
Click the   button.
12Select the printer port and click the   
button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
OK
Close
OK