Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Operating Instructions

							111
Printer Section
Printing on Network
For sharing a printer by connecting two computers via a crossover cable or using a hub, a connection
among computers must be established.
Establishing a connection among computers can be verified by displaying the connected computers in
Network Neighborhood on the desktop.
The settings for printer sharing are specified by performing the following steps:
Printer server (PC connected to a printer)
Upon completion of the setting, the shape of the icon changes indicating that the printer is shared.
NOTE1. Refer to the manual for the network card and Windows users guide for connections among
computers.
2. On Windows 98/Me, a computer connected to a printer must be set up to allow printer sharing
by performing the following operations:
1) Double-click on Network in control panel, and then click   button
in the Network Configuration tab.
2) Check [I want to be able to allow others to print to my printer(s).] in the File and Print
Sharing dialog box.
1
Install the printer driver on the computer to be connected
to the machine.
2
Click the Start button, select Settings, and then click
Printers.
3
Right-click on the desired printer icon and select
[Sharing...] in the popup menu.
4
Select Shared As in the properties dialog box.
5Click the   button.OK
File and Print Sharing... 
						

							Printing on Network
112
Remote (PC that uses another computers printer)
The operations above enables output from the remote computer to a printer connected to the printer server.
1
Click the Start button, select Settings, and then click
Printers.
2
Double-click Add Printer in the printers folder.
Add Printer Wizard appears.
Click  the   button.
3
Select Network Printer.
Click  the   button.
4
Specify the other computers printer by entering the
network path.
Then, complete the installation following instructions of
the Add Printer Wizard.
Next
Next 
						

							113
Printer Section
Internet Printing Protocol (IPP) Printing
Prints documents from a machine located in a remote area via the Internet without its access being blocked
by a proxy server. This feature is only available on the Windows 2000 or XP.
Compatible Models
• DP-3510/3520/4510/4520/6010/6020 with PCL Printer Module (DA-PC600/PC601) or PS Printer Module
(DA-MC600/601)
• DP-2310/3010 with PCL Printer Module (DA-PC300) or PS Printer Module (DA-MC300)
General Description
Setting the IPP Printing
1Verify whether your PC is connected to the Internet
or to the Intranet.
Open the Add Printer Wizard.
2Select the Network printer and click the 
 button.
Windows 2000 or XP
Next
Continued on the next page... 
						

							Internet Printing Protocol (IPP) Printing
114
Setting the IPP Printing
3Select the Connect to a printer on the Internet or
on your Intranet and type the IP address of the
remote machine and /printer in the URL window. 
(e.g. http://10.74.229.176/printer)
Click  the   button.
4Click the   button if this message is
shown. 
If not, skip to Step 11. 
51. Insert the CD-ROM included with the Option.
2. Click the   button
6Click the   button.
(DP-2310/3010)
D:\English\PCL\Driver\Para&Net\WinXP-2K
(DP-3510/3520/4510/4520/6010/6020)
D:\English\PCL\Driver\WinXP-2K
 (where D is your CD-ROM drive).
7Click the   button.
Next
OK
Have Disk...
Browse...
Open 
						

							Internet Printing Protocol (IPP) Printing
115
Setting the IPP Printing
Printer Section
8Click the   button.
9Select the remote machine.
Click the   button.
10Click the   button.
11Select Ye s if you would like to change your current
default printer and click the   button.
OK
OK
Yes
Next
Continued on the next page... 
						

							Internet Printing Protocol (IPP) Printing
116
Setting the IPP Printing
The IPP Printer Driver has been installed, and the Printer icon has been added to the Printer folder.
12Click the   button.Finish 
						

							117
Printer Section
IPX-SPX Setup Wizard
If you wish to use your machine as a printer on the NetWare environment, install the set-up utility fist using
the Custom installation menu. (See page 5).
    Compatible Models
• DP-3520/4520/6020 with IPX/SPX Printer Module (DA-GC601, PC601, MC601)
Note: DA-GC601 is not available in the USA and Canada.
Select Panasonic  Panasonic Document Management System  IPX-SPX Setup Wizard from
Programs on the Start menu to activate the utility. To configure your PC for the NetWare environment,
follow the procedure below:
Windows 98/Me/NT/2000/XP
1The machine(s) that are available on the
NetWare environment are shown on the list.
Select the desired machine and click the
 button.
2Make sure that the Do not use NetWare is
not selected.
Select the desired NetWare mode and click
the  button.
1.NDS print server
2.Bindery print server
3.Remote printer
3Select the Frame type and click the
 button.
1.Automatic
2.IEEE 802.2
3.IEEE 802.3
4.ETHERNET II
5.IEEE SNAP
Next
Next
Next
Continued on the next page... 
						

							IPX-SPX Setup Wizard
118
Windows 98/Me/NT/2000/XP
4a
Set the Tree, Context, Print server name,
Printer server password and Print port
name for the NDS Printer Server and click the
 button.
Note:
Logon to the NetWare using an account
with administrator rights.
Enter the Print queue name and click the
 button.
Enter the Queue volume and click the
 button.
Next
Next
Next 
						

							IPX-SPX Setup Wizard
119
Windows 98/Me/NT/2000/XP
Printer Section
4b
Set the File server, Print server name and
Print server password for the Bindery print
server and click the   button.
Note:
Logon to the NetWare using an account
with administrator rights.
Enter the Print queue and click the
 button.
4c
Set the Printer port name for the Remote
printer and click the   button.
Next
Next
Next
Continued on the next page... 
						

							IPX-SPX Setup Wizard
120
Windows 98/Me/NT/2000/XP
5The settings are shown on the list.
Click  the   button.
6Click the   button to apply the
settings.
7Click the   button.
Next
OK
Finish