Panasonic Software DP-130/150/1810/2000/2010/2500/3000 Operating Instructions

Configuring the Printer Driver Settings
61
Windows 2000/XP (Administrator)
Printer Section
2.Duplex Unit (For DP-2000/2500)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
Duplex printing function is enabled.
3.Output Tray (For DP-2000/2500/3000)
If Exit Tray (Inner) and Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select inner option.
This allows specifying Inner 1 and Inner 2 as output bins for printer output.
If 1-Bin Finisher or Exit Tray (Outer)...

Configuring the Printer Driver Settings
62
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by a user, upon executing a print operation on an
application. See Settings Printer Driver on Windows 2000/XP (Administrator) for details of
administrator (system manager) properties.  (See page 53)
Windows 2000/XP (User)
1
Select...

Configuring the Printer Driver Settings
63
Windows 2000/XP (User)
Printer Section
General Tab
1.Select Printer
Select a printer for printing.
2.Page Range
Select a page range for printing.
3.Number of Copies (1-99)
Specify the number of copies.
4.Collate
Upon printing two or more copies, pages are output for each copy. 

Configuring the Printer Driver Settings
64
Windows 2000/XP (User)
Layout Tab
1.Orientation
Select the print orientation (Portrait/Landscape).
2.Print on Both Sides (Duplex) (For DP-150FX/2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Select the binding side (None/Flip on Short Edge/Flip on Long Edge) for duplex printing.
Note 1) Duplex Printing on post card is not allowed.
2) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and
Automatic...

Configuring the Printer Driver Settings
65
Windows 2000/XP (User)
Printer Section
Paper/Quality Tab
1.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
2. button
Specify detailed settings. Refer to Advanced (See page 66) for details.
Advanced... 

Configuring the Printer Driver Settings
66
Windows 2000/XP (User)
Advanced
1.Paper Size
Select a document size.
2.Resolution
Select the printer resolution (300dpi/600dpi).
3.Scaling
Specify custom zoom when printing a document by zooming in/out at a desired rate. If the zooming rate is
specifiable in an application, specify 100% (same size) here. Specify a zooming rate in the print dialog
box of the application.
4.Metafile Spooling
With Metafile Spooling enabled, the file is spooled in EMF format...

Configuring the Printer Driver Settings
67
Windows 2000/XP (User)
Printer Section
7.Staple (For DP-2000/2500/3000)
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and
1-Bin Finisher (DA-FS200) mounted.
2) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation Paper orientation  Stapling position
Letter
A4
Letter
A4Letter
A4
Top left
Letter/A4...

Configuring the Printer Driver Settings
68
Windows 2000/XP (User)
8.Output Tray (For DP-2000/2500/3000)
Specify the output destination. 
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
2) Post cards cannot be output from the outer tray.
9.Security Print
Select to enable Security Print.
10.Halftone Color Adjustment
Contrast
Adjust the contrast of print images.
Brightness...

69
Printer Section
Print Operation
If the printer driver is installed properly and a printer is selected as the default printer in the printer setup,
printing can be accomplished from any Windows application with simple operations.
To print from most Windows applications, use the Print... command on the File menu. Selecting the Print...
command typically displays the following Print dialog box:
After selecting the print range to be printed and the number of copies, click on   to start printing.
While...

Print Operation
70
For sharing a printer by connecting two computers via crossed-cable or using a hub, a connection among
computers must be established.
Establishing a connection among computers is verified by displaying the connected computers in Network
Neighborhood on the desktop.
The settings for printer sharing is specified by the following steps:
Printer server (PC connected to a printer)
Upon completion of the setting, the shape of the icon changes indicates it is shared.
NOTE1. Refer to the...