Panasonic Software DP-130/150/1810/2000/2010/2500/3000 Operating Instructions

Installing the LPR (Line Printer Remote) Monitor
21
Printer Section
Log in using an account with the administrators right.
Windows NT 4.0
1Click on the Start button, point to Settings, and click
Control Panel.
The Control Panel window appears.
Double-click on the Network applet.
The Network dialog box appears.
2Click on the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in the
Network Services list.)
If it is already installed, skip over...

Installing the LPR (Line Printer Remote) Monitor
22
Windows NT 4.0
4The Windows NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type
D:\i386 (where D: is your CD-ROM drive).
Click on the   button.
5After the files are copied into your Hard Drive, the
display returns to the Network dialog box. Confirm
that the Microsoft TCP/IP Printing service was added
to Network Services list.
Click on the   button.
Note:
Delete and Reinstall the Microsoft TCP/IP
Printing if an error occurs, and the...

Installing the LPR (Line Printer Remote) Monitor
23
Windows NT 4.0
Printer Section
8The following step is to Register the LPR Port for
network printing.
Before proceeding, ensure that the Printer is
installed, connected to the Network, is turned ON
and operating properly.
Select the Ports Tab and click on the
 button.
9The Printer Ports dialog box appears.
Select LPR Port and click the 
button.
10The Add LPR compatible printer dialog box
appears.
Enter the IP Address of the Printer in the upper field,...

Installing the LPR (Line Printer Remote) Monitor
24
Windows NT 4.0
11The Printer Ports dialog box appears.
Click on the   button.
12Select the printer port and click the 
button.
The printer properties dialog box is closed and you
have now configured the printer as a network printer.
Close
OK 

Installing the LPR (Line Printer Remote) Monitor
25
Printer Section
Log in using an account with the administrators right.
Windows 2000/XP
1Open the Printers folder.
Right-click on your desired printer (Ex.
Panasonic DP-3000) and select Properties
from the pop-up menu.
The printer properties dialog box appears.
2Select the Ports Tab and click on the
 button.
Add Port...
Continued on the next page... 

Installing the LPR (Line Printer Remote) Monitor
26
Windows 2000/XP
3Select Standard TCP/IP Port and click the
 button.
4Click on the   button.
5Enter the IP Address and the Port Name and
click the   button.
Note:
The Port Name is automatically
entered by Windows 2000/XP. You
may change this as required.
New Port ...
Next
Next 

Installing the LPR (Line Printer Remote) Monitor
27
Windows 2000/XP
Printer Section
6Select Custom and click the 
button.
71. Under the Protocol, select LPR.
2. Under the LPR Settings, enter the
Queue Name (Ex. LPR1) and check the
LPR Byte Counting Enabled.
3. Click on the   button.
8Click on the   button.
Click on the   button.
The printer properties dialog box is closed and
you have now configured the printer as a
network printer.
Settings...
OK
Next
OK
Continued on the next page... 

Installing the LPR (Line Printer Remote) Monitor
28
Windows 2000/XP
9Click on the   button.
10Click on the   button.
11Click on the   button.
Click on the   button.
The printer properties dialog box is closed and
you have now configured the printer as a
network printer.
Finish
Close
Apply
OK 

29
Printer Section
Configuring the Printer Driver Settings
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. Upon printing, changing the properties of Paper/Layout, Handling, Quality and Device
Options is allowed by clicking Properties in the print dialog box of an application.
2.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified.
Windows 95/98/Me
1
Click the Start button, point to Settings, and then...

Configuring the Printer Driver Settings
30
Windows 95/98/Me
General Tab
1.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an already set-up user will
remain unchanged even if the comment is modified later.
2.Separator page
This feature is not available on your machine.
3.  button
Prints a test page. This allows the user to...