Panasonic Software DP-130/150/1810/2000/2010/2500/3000 Operating Instructions

Configuring the Printer Driver Settings
51
Windows NT 4.0 (User)
Printer Section
4.Staple (DP-2000/2500/3000)
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and
1-Bin Finisher (DA-FS200) mounted.
2) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation Paper orientation  Stapling position
Letter
A4
Letter
A4Letter
A4
Top left
Letter/A4...

Configuring the Printer Driver Settings
52
Windows NT 4.0 (User)
5.Output Tray
Specify the output destination.
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
2) Post cards cannot be output from the outer tray.
6.Security Print
Select to enable Security Print.
7.Halftone Color Adjustment
Contrast
Adjust the contrast of print images.
Brightness
Adjust the brightness of print...

Configuring the Printer Driver Settings
53
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by an administrator (system manager). See Configuring
the Printer Driver Settings for details of user properties. (See page 62)
Windows 2000/XP (Administrator)
1
Log onto the computer/network with an account rights...

Configuring the Printer Driver Settings
54
Windows 2000/XP (Administrator)
General Tab
1.Printer Name
Name of the printer specified upon installation is displayed.
2.Location and Comment
Enter a comment about the location of the printer installation and information about the printer.
If a printer is shared, the location and comment specified in this field appears when another user sets up
this printer on his/her computer. After completion of setup, however, changing this comment does not
update the...

Configuring the Printer Driver Settings
55
Windows 2000/XP (Administrator)
Printer Section
Sharing Tab
1.Not Shared/Shared As
Specify if this printer is displayed or used on a computer of other users.
For sharing a printer, specify the share name of a printer to be shared. A name specified here appears
when other users view the printer information on a network
2. button
Install additional printer drivers on the system.
When users running different versions of Windows share a printer, installing...

Configuring the Printer Driver Settings
56
Windows 2000/XP (Administrator)
Ports Tab
1.Print to the following port(s)
Displays a list of ports that allows printing, their status (description), and printers connected to the ports.
2. /   button
Adds/deletes a new port or a new network path.
3. button
Configure the port that is selected. On a parallel port, wait time (in seconds) for retransmission is
specified.
4.Enable bidirectional support
On a printer, this setting enables reception of configuration...

Configuring the Printer Driver Settings
57
Windows 2000/XP (Administrator)
Printer Section
Advanced Tab
1.Always available/Available from
Specify the operation schedule for a printer. Selecting Available from allows specifying an operation
time.
2.Priority
Specify the priority in printing. Priority is adjustable from 1 to 99. Document of higher priority are printed
before those of lower priority.
3.Driver
Displays the printer driver type. Specify the printer being used or a printer model that can be...

Configuring the Printer Driver Settings
58
Windows 2000/XP (Administrator)
9.Enable advanced printing features
Enables advanced printing features. Optional features of the printer (page ordering, booklet printing,
numbering on sheets) are enabled. These features can be disabled if a problem occurs due to
incompatibility. Disabling the features may disable the printing options also.
10. button
Specifies standard (default) values for the properties (print settings) specifiable for each user. If a local...

Configuring the Printer Driver Settings
59
Windows 2000/XP (Administrator)
Printer Section
Security Tab
Displays a list of users and groups that are assigned access to this printer. A list of standard access
permitted/prohibited for each group or user is displayed. Check the checkbox for permitting or prohibiting
access. Gray checkbox indicates inheritance of access permission.
1. /   button
Add or delete a user or group in the list.
2. button
Specify access to a printer, audit, and owner.
NOTE1. Windows...

Configuring the Printer Driver Settings
60
Windows 2000/XP (Administrator)
Device Settings Tab
1. button
Select the method of expressing device halftone (printer-specific halftone). Select the settings according
to printing data and preference.
Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the image would become. However, a larger value is suited to printing
in large areas.
The Enhanced pattern allows printing at a higher resolution using the same...