Home
>
Panasonic
>
Communications System
>
Panasonic Small Digital Business System 308/616 Installation Instructions
Panasonic Small Digital Business System 308/616 Installation Instructions
Here you can view all the pages of manual Panasonic Small Digital Business System 308/616 Installation Instructions. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 211
Section 700 S-DBS Operating Instructions Issue 1 July 1990 Vl .o PLACING OUTSIDE LINE CALLS MIakingaCall 1. Press a line key. The ON/OFF key will light ._..-- 2; ------.-- Dial the telephone number 3. Pick up receiver Dial CO (Outside Line) Access To access a direct dial outside line 1. pick up the receiver OR Press ON/OFF key 2. Listen for intercom dial tone 3. -__---- ___-.--.- .- Get external dial tone by dialing the access code 88 plus the line number. 4. Dial the telephone number....
Page 212
S-DBS Operating Instructions Section 700 VI .o issue 1 July 1990 Pooled Trunk Access * To access a pooled trunk group line with a one-touch key 1. Pick up receiver OR Press ON/OFF key 2. Get outside dial tone by dialing access code 9 or 81. 82 or 83. 3. Dial the telephone number. The dialed number wiU appear on the display. NOTE: To operate this phone system as a Hybrid System, modifications must be made by a qutied dealer for proper re-configuration and registration procedures. Flash Key *...
Page 213
Section 700 S-DBS Operating Instructions Issue 1 July 1990 Vl .o INTERCOM CALLS Attendant Calls You can call the attendant on extension 10 from any other extension by pressing the 0 (OPER) key. Pick up the receiver -_.-. Press ON/OFF key 2. Press 0 Other Extensions Calls to other extensions can be either voice or tone. The system is set for voice call, but you may change to tone by pressing 1 after dialing an extension number. Once changed the only way you can revert back to voice is to...
Page 214
S-DBS Operating Instructions Section 700 Vl .o Issue 1 July 1990 Answering Calls from Other Extensions 1. Pick up the receiver OR Press the ON/OFF key 2. The EXT LED lights red __..----_. - .-..-.. ..-.... .-. - _ _. 3. The number of the calling extension will appear on display. Hands-Free Answer Back To answer a Voice call without picking up the receiver 1. The MUTE LED must be off to talk without picking up the receiver. 2 If the MUTE LED is on, press the MUTE key to turn it off. Intercom...
Page 215
Section 700 S-DBS Operating Instructions Issue 1 July 1990 Vl .o To release a call on Hold 1. Press HOLD key. 2. The EXT LED will stop flashing. NOTE: There is no Hold recall for Intercom Hold. Call Waiting l cprogrcUnming Required> To set Call Waiting 1. Press ON/OFF key 2. Dial the extension number and wait for the busy signal. 3. To send the Call-Wait tone to the extension, press 3 while you can still hear the busy signal. The EXT LED of the called party will flash red. To answer Call...
Page 216
S-DBS Operating Instructions Vl .o Section 700 Issue 1 July 1990 ANSWERING OUTSIDE LINE CALLS Automatic Answer To answer an outside line call on a ringing telephone 1. Pick up the receiver when the line LED blinks red. The LED will light green. OR Press ON/OFF key. The key M then light green ___ _.- .--.. -- -..... - -..-_-__. - To answer an outside call on a telephone that is not ringing 1. Pick up the receiver 2. Press the line key that is slowly flashing red. It will light green. NOTE:...
Page 217
Section 700 issue 1 July 1990 S-DBS Operating Instructions VI .o Call Pickup Group You can answer incorning calls or intercom tone calls to other extensions in your paging group without entering the number of the ringing extension. The lowest port number is answered first if there are several calls at one time. 1. Pick up the receiver OR Press ON/OFF key 2. Dial 70 3. The EXT LED lights red NOTE: You cannot use this feature during paging, alarm ring, talk-back ring or call-back requests....
Page 218
S-DBS Operating Instructions VI .o .I , Section 700 Issue 1 July 1990 HOLDING CALLS Outside Line Hold There are two methods of placing an outside caller on hold. Exclusive hold restricts the release of a hold only to the extension that put the call on hold. System hold is not restricted and the call can be picked up at any extension. To place a call on Exclusive Hold 1. Press the green line key, it will flash ranidlv and you will hear a con- tinuous tone. 2. Press ON/OFF key OR Replace the...
Page 219
.-_~. ..Section~lQO.- _.-... Issue 1 July 1990 S-DBS Operating Instructions Vl .o CONFERENCE CALLS You can add on an outside line to either an outside line call or an intercom call for a three-party conference. The system can accommodate up to three conference calls at the same time. To add on an outside line 1. Pressing the HOLD key or the line key will put the current call on hold. 2. Press a line key not in use. It will && green and you will hear a dial tone. 3. Dial telephone number 4....
Page 220
S-DBS Operating Instructions Section 700 Vl .o Issue 1 July 1990 Privacy Release To allow a three-party conference call you have to release the privacy restriction on your phone. 1. Press CQNF key 2. Give the third party your line number. 3. The third party must press the same line number to join the conference call. NIGHT KEY * dke the attendant’s phone> To chanie from day &ode to night mode: -” -- 1. Press ON/OFF key 2. Dial # 52 3. Press ON/OFF key On the DSS telephone F’F key 24 is the...