Panasonic Small Digital Business System 308/616 Installation Instructions

DBS 
n-3 Extension mode 
FF3-( 1 - 72)#- 29#-(0 - 13)# 
Large LCD information on the outside line 
corkersation (In dialing) status 
The contents are set for display on a large LCD 
when the extension is getthe outside line. 
08: No chanae 
l#: Change to menu information 
2#: Change to personal speed dial index 
3~.: Change to system speed dial index 
4#: 
Change to extension index 
58: 
Change to guidance menu 1 
(ABSES, AC-CODE.LKOUT,REMDR,FF-Key) 
6#: Change to guidance menu 2 
(PSD,CFWD/AII call/No...

SECTION 400 (Version 3.0) 
Issue 1 January 1990 
FF3-( 1 - 72)#- 30#-(0 - 13)# 
Large LCD information on the outside line 
conversation 
(After dialing) status 
The contents are set for display on a large LCD 
when the extension started the outside line 
conversation. 
0#: No chanae 
I#: Change to menu information 
2%: Change to personal speed dial index 
3#: Change to system speed dial index 
4#: Change to extension index 
5#: Change to guidance menu 1 
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key) 
6#: Change to...

DBS 
FF-3 Extension mode SECTION 400 (Version 3.0) 
issue 1 January 1990 
FF3-(l- 72)#-31#-(O- 13)# 
Large LCD information on the receiving 
page call status 
The contents are set for display on a large LCD 
when the extension is receiving the page call. 
0#: No chance 
If: Change to menu information 
t#: Change to personal speed dial index 
3%: Change to system speed dial index 
4#: Change to extension index 
S#: Change to guidance menu 1 
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key) 
6#: Change to guidance menu...

SECTION 400 (Version 3.0) 
Issue 1 January 1990 DBS 
FF-3 Extension mode 
FF3-( I- 72)#- 32#-(0 - l3)# 
Large LCD information on the receiving 
call wait status 
The contents are set for display on a large LCD 
when the extension is receiving the call waiting. 
O#: No chanae 
l#: Change to menu information 
28: Change to personal speed dial index 
3%: Change to system speed dial index 
OR: Change to extension index 
5#: Change to guidance menu 1 
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key) 
6#: Change to...

DBS 
FF-3 Extension mode SECTION 400 (Version 3.0) 
Issue 1 January 1990 
FF3-(1 - 72)#- 33#-(0 - 13)# 
Large LCD information on the busy tone 
receiving status 
The contents are set for display on a large LCD 
when the extension is receiving the intercom busy 
tone. 
O#: No chanoe 
l#: Change to menu information 
2%: Change to personal speed dial index 
3#: Change to system speed’dial index 
4#: Change to extension index 
58: Change to guidance menu 1 
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key) 
6%: Change to...

SECTION 400 (Version 3.0) 
Issue 1 January 1990 
Specifications are made with regard to incoming 
outside calls and incoming intercom call groups for 
each extension. 
In the case of outside lines it is set which incoming 
calls each extension is to receive. 
The settings for daytime and nighttime can be 
done separately. 
There are the following two group settings for 
. 
incoming intercom calls. 
A:Call hunting group setting 
Extensions are set in groups for answering 
incoming calls. 
The...

D%S 
FF-4 Ring mode 
3- 4- 1 Day Time Incoming Calf Setting 
mode 
FF4-l#-(l -73)#-(l- 32)#-(0 or l)# 
Daytime incoming outside line call setting 
table 
It is set which incoming outside line call tones are 
to sound for each extension during the day. While 
it is possible to make calls from 
an extension pon 
not programmed for incoming calls, it is not 
possible to use the auto answering function for 
incoming calls. Incoming calls are answered by 
pressing the relevant line key or utilizing the...

SECTION 400 (Version 3.0) DBS 
issue 1 January 1990 
FF-4 Ring mode 
3 - 4 - 2 Night Time Incoming Call Setting 
mode 
FF4-2#-( 1 - 73)#-(1- 32)#-(0 or 1)# 
Nighttime incoming outside line call 
setting table 
It is set which incoming outside line call tones are 
to sound for each extension during the night and 
on holidays. 
While it is possibleto make calls from an extension 
port not programmed for incoming calls, it is not 
possible to use the auto answering function for in 
coming calls. 
incoming...

DBS 
FF-4 Ring mode 
3 - 4 - 3 Hunting group setting mode 
When there is an incoming call to a group for a 
work unit within the company, if the extension 
which has received it is busy, it is automatically 
transferred to another extension in the group. 
With this setting extensions are stored for each 
hunting group number for allowing incoming calls 
to be automa tically transferred between them 
when they are busy. 
-. For the registered extensions incoming calls are 
transferred within the group...

SECTION 400 (Version 3.0) 
Issue 1 January 1990 
FF4-3#-(1- 8)#-2#-(l - 8)# 
Next caI1 hunting group 
If all the extensions in one hunting group cannot 
receive an incoming call, it can be automatically 
transferred to another hunting group. However, a 
hunting group in which automatic transfer is 
. 
actually operating at the time cannot be set for 
this. It has to be set after that operation has 
finished. 
A hunting group number for the transferee is set 
for each transferring hunting group. This...