Panasonic Sdr S150 Operating Instructions Manual

61VQT0X39
Slow-motion playback
The motion pictures will be played back at a speed approx. 1/5 the normal speed.
1) Press the cursor button up during 
motion picture playback to pause the 
playback.
2) Keep pressing the cursor button right. 
(Slow-motion pictures will be played 
back in reverse when you keep pressing 
the cursor button left.)
≥Normal playback is restored when the 
cursor button up is pressed.
≥The sound is muted during slow-motion 
playback.
Frame-by-frame playback
The motion picture is...

62VQT0X39
Playing back motion pictures by date
1) Press the menu button, then use the 
cursor button to select 
[PLAYSETUP]#[PLAYMODE]#
[BY DATE]. (P27)
≥When [PLAY MODE] is set to [VIEW ALL], 
all recorded motion pictures will be played 
back in succession. ([ ALL] is displayed.)
2) Press the cursor button up or down to 
select the date for playback, then press 
the button in the center.
≥Once the playback of one motion picture is 
started, any other motion pictures recorded 
on the same day will then...

63VQT0X39
1 Rotate the mode dial to select  .
The lens cover closes automatically.
The still pictures (up to 12 scenes) recorded on 
the SD card are displayed as thumbnails.
2 Press the cursor button up, down, left 
or right to select the scene to be 
played back.
1Scene number
2Bar graph
The selected scene will be encircled by a red 
frame.
≥When 13 or more scenes have been recorded, 
the next (or previous) page is displayed by 
pressing the cursor button.
≥If you press and hold the cursor button up or...

64VQT0X39
Playing back still pictures as a slide show
Press the menu button, then use the 
cursor button to select 
[PLAYSETUP]#[PLAYMODE]#
[SLIDE SHOW]. (P27)
≥Still pictures will not be played as a slide show 
when [PICTURE] is selected.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File 
system) established by JEITA (Japan Electronics and Information Technology 
Industries Association).
≥The file format supported by this unit is JPEG....

65VQT0X39
The deleted scenes cannot be restored.
∫Deleting multiple files from the thumbnail display.
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[ DELETE]#[ SELECT] or 
[ ALL]. (P27)
When [SELECT] is selected, the motion picture 
or still picture scenes will be displayed as 
thumbnails.
≥When [ALL] is selected, proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Use the cursor button to select the 
scene to be deleted, then press the...

66VQT0X39
∫Deleting scenes one at a time
¬Rotate the mode dial to select   or  .
1Press the [ ] button during 
playback.
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To stop deleting, select [NO].
∫Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be 
erased.
Deleting scenes (continued)
DELETE SCENE?
SETUP ENTER
YES
NO
DELETE...

67VQT0X39
Scenes recorded on an SD card can be locked so that they may not be deleted by 
mistake. (However even if you lock some scenes on an SD card, formatting the card will 
delete all the scenes.) 
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]#[ LOCK]# 
[YES]. (P27)
2Press the cursor button up, down, left 
or right to select the scene to be 
protected, then press the button in 
the center.
[ ] indication appears and the selected...

68VQT0X39
Please be aware that if an SD card is formatted, then all the data recorded on the 
card will be erased. Store important data on a PC, etc. We recommend using 
MotionSD STUDIO etc. to acquire data recorded on this unit. (P76)
¬Rotate the mode dial to select  ,  ,   or  .
1Press the menu button, then use the 
cursor button to select [ SETUP]#
[ FORMAT CARD]#[YES]. (P27)
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To...

69VQT0X39
You can write the data of pictures to be printed, number of copies, and other 
information (DPOF data) onto the SD card.
¬Rotate the mode dial to select  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]#[ DPOF SET]#
[SET]. (P27)
2Press the cursor button up, down, left 
or right to select a scene to be set, 
then press the button in the center.
The number of prints set to be in DPOF is 
displayed.
3Press the cursor button up or down to 
select the number of prints,...

70VQT0X39
∫What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to 
be written onto an SD card so that it can be used on a system supporting DPOF.
To print pictures by directly connecting this unit to the printer, use a printer compatible 
with PictBridge. (Read the operating instructions for the printer.) 
¬Connect this unit to the AC adaptor.
¬Rotate the mode dial to select  .
1Open the terminal cover, then firmly 
plug one end of the USB cable 1...