Panasonic Sdr S150 Operating Instructions Manual

81VQT0X39
≥Before attempting to start up the CD launcher, close all other software applications 
which are running.
≥Install the driver if you are using Windows XP Service Pack 1 or Windows 2000 
Service Pack 4. (With Windows XP Service Pack 2, the driver does not need to be 
installed because the Web camera is run using the operating system’s standard 
driver.)
≥If you are using Windows XP, installation may take some time depending on the 
environment.
1 Insert the CD-ROM into the PC.
The CD launcher...

82VQT0X39
4 Read carefully through the terms and 
conditions shown on the screen for 
the [License Agreement], then click 
[Yes].
≥You cannot install the application if you click 
[No]. 
≥Depending on the operating environment, you 
may be required to install DirectX 9.0b. If so, 
click [Yes], and install it.
≥The PC will reboot automatically after the 
application has been installed. Do not remove 
the CD-ROM.
≥After the PC has rebooted, the installation of the Web camera driver starts from 
step 3.
5...

83VQT0X39
After the driver and software applications are installed, the unit must be connected to the PC 
and be correctly recognized by the PC.
≥Connect after installing the driver and software applications.
If you connect this unit to a PC before installation, this unit may not be properly recognized.
≥If a CD-ROM is inserted in the PC, remove it. (If the CD launcher is running, wait until it 
finishes, then remove the CD-ROM.)
≥If the recognition procedure is not accomplished properly, operation will...

84VQT0X39
When this unit is in motion picture recording mode or still 
picture recording mode, verify the driver. (P90)
≥If you are running Windows 2000, the message 
shown on the right may appear the first time you 
connect this unit to the PC (the first time you use 
motion picture recording mode or still picture 
recording mode). This has no affect on operation 
so click [Yes].
– [Panasonic SD Video Camera Web Camera Device] 
is displayed.
– The recognition procedure is completed 
automatically, and...

85VQT0X39
≥Before initial use, select the software’s [Read this first] from the start menu, then 
read through the additional instructions or updated information.
≥The End User Licence Agreement is displayed when the software is first started so 
read carefully through its terms and conditions, then click [I agree].
∫Starting MotionSD STUDIO
1 Select [start]>
[All Programs (Programs)]>
[Panasonic]>
[MotionSD STUDIO 1.1E]>
[MotionSD STUDIO].
[Let’s Try MotionSD STUDIO] is displayed on the 
screen....

86VQT0X39
For details on how to use MotionSD STUDIO, read the PDF instructions or the help 
files.
1 Select [start]>
[All Programs (Programs)]>
[Panasonic]>
[MotionSD STUDIO 1.1E]>
[Manual (PDF format)].
≥After star ting the software, on the menu select 
[Help]>[Help] to display the help files.
≥You will need Adobe Acrobat Reader 5.0 or 
later to read the PDF operating instructions. 
(P76)
When the unit is connected to a PC, you can send pictures and audio from the unit over 
the Internet to the person...

87VQT0X39
∫Software that can be used when using the unit as a Web Camera
(±: Available, —: Not available)
Refer to page 79 for information about the operating environment.
1Your own PC
2Other person’s PC
∫Connections
Before connecting the unit to the PC, you must install [Web Camera Driver]. (P81)
1) Turn on the unit’s power, then set it to motion picture recording mode or still 
picture recording mode.
2) Connect the unit to the PC via the USB cable. (P83)
≥Do not use any other USB cables except the...

88VQT0X39
≥Even if the system requirements mentioned in these operating instructions are 
fulfilled, some personal computers cannot be used.
≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, 
Inc. in the United States and/or other countries.
≥PowerPC is a trademark of International Business Machines Corporation.
≥Intel
® CoreTM Solo and Intel® CoreTM Duo are either registered trademarks or 
trademarks of Intel Corporation in the United States and/or other countries....

89VQT0X39
1) Double click the   icon in task tray.Hardware disconnect dialogue appears.
≥Depending on your PC’s settings, this icon may not be displayed.
2) Select [USB Mass Storage Device] and click [Stop].
3) Verify [MATSHITA SD Video Camera USB Device] is selected and click [OK].
≥Click [OK], and you can safely disconnect the cable.
Follow the steps below to uninstall any software applications that you no longer require.
1 Click [start]>([Settings]>) [Add or 
Remove Programs (Applications)] in...

90VQT0X39
If the driver does not work properly, follow the steps below to verify if it has been 
recognized properly. Select the unit’s mode, connect the unit to the PC via the USB 
cable, then verify the driver. (P83)
≥With some PCs including those made by NEC, the Device Manager may not be 
displayed if a mode that places restrictions on the functions has been established. 
Consult the manufacturer or follow the steps in your PC’s operating instructions to 
establish a mode in which all the functions...